Abstract
Construction, repair and maintenance costs of a highway as well as its operation performance and environmental-social effects are mostly depend on its alignment. Therefore, the most important step in the highway planning activity is the alignment determination step. In this study; a 3 stage model incorporating Multi-Criteria Decision Making (MCDM) and Geographical Information Systems (GIS) is developed for highway alignment determination process. In the model; many criteria are handled simultaneously at the beginning of the project according to a concrete procedure with the existence of spatial data, and thus, many drawbacks of existing alignment determination process are eliminated. Fuzzy functions were used in the standardization of criteria maps. Analytic Hierarchy Process (AHP) was used in the determination of criteria weights. Weighted Lineer Combination method was used for the combination of criteria maps. Developed model was tested in a highway project in Tokat, Turkey. IDRISI software was used in the case study for the application of the model. It is seen that use of three stages in the process makes it easy; to take constraints into evaluation, to create alignment alternatives with different viewpoints and to make selection between alternatives with different viewpoints.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Abdi, E., Majnounian, B., Darvishsefat, A., Mashayekhi, Z., and Sessions, J. (2009). “A GIS-MCE based model for forest road planning.” Journal of Forest Science, Vol. 55, No. 4, pp. 171–176.
Bailey, K. (2003). “AMIS: Development and application of a GIS/multi-criteria corridor evaluation methodology.” Proceedings of the Map Asia 2003 Conference.
Barfod, M. B., Salling, K. B., and Leleur, S. (2011). “Composite decision support by combining cost-benefit and multi-criteria decision analysis.” Decision Support Systems, Vol. 51, pp. 167–175.
Borovshaki, S. and Malczewski, J. (2008). “Implementing an extension of the AHP using ordered weighted averaging operators with fuzzy quantifiers in ArcGIS.” Computers and Geosciences, Vol. 34, pp. 299–410.
Carver, S. J. (1991). “Integrating multi-criteria evaluation with geographical information systems.” International Journal of Geographical Information Systems, Vol. 5, No. 3, pp. 321–339.
Djenaliev, A. (2007). Multi-criteria decision making and GIS for railroad planning in Kyrgyzstan, MSc Thesis, Royal Institute of Technology (KTH), Sweden.
Eastman, J. R. (2006). IDRISI Andes-Guide to GIS and image processing, Clarklabs, Clark University, Worcester, USA.
Feldman, S. C., Pelletier, R. E., Walser, E., Smoot, J. C., and Ahl, D. (1995). “A prototype for pipeline routing using remotely sensed data and geographic information system analysis.” Remote Sensing of Environment, Vol. 53, Issue 2, pp. 123–131.
Lim, K. S. and Lee, D. R. (2009). “The spatial MCDA approach for evaluating flood damage reduction alternatives.” KSCE Journal of Civil Engineering, Vol. 13, No. 5, pp. 359–369.
Malczewski, J. (1999). GIS and multiple-criteria decision analysis, New York, John Wiley and Sons.
Malczewski, J. (2006). “GIS Based multicriteria decision analysis: A survey of the literature.” International Journal of GIS, Vol. 20, No. 7, pp. 703–726.
Malczewski, J., Moreno-Sanchez, R., Bojorquez-Tapia, L. A., and Ongay-Delhumeau, E. (1997). “Multicriteria group decision making model for environmental conflict analysis in the cape region, Mexico.” Journal of Environmental Planning and Management, Vol. 40, No. 3, pp. 349–374.
Rowland, A. (2005). GIS route selection analysis for oil and gas exploration using multi-criteria decision analysis-case study of the oil and gas producing area of the Niger Delta In Nigeria, MSc Thesis, University of Greenwich, London.
Saaty, T. L. (1980). Analytic hierarchy process, McGrawHill, New York.
Sadek, S., Bedran, M., and Kaysi, I. (1999). “GIS Platform for multicriteria evaluation of route alignments.” Journal of Transportation Engineering, Vol. 125, No. 2, pp. 144–151.
Saha, A. K., Arora, M. K., Gupta, R. P., Virdi, M. L., and Csaplovics, E. (2005). “GIS-Based route planning in landslide-prone areas.” International Journal of Geographical Information Science, Vol. 19, No. 10, pp. 1149–1175.
Ulubeyli, S. and Kazaz, A. (2009). “A multiple criteria decision-making approach to the selection of concrete pumps.” Journal of Civil Engineering and Management, Vol. 15, No. 4, pp. 369–376.
Warner, L. L. and Diab, R. D. (2002). “Use of geographic information systems in an environmental impact assessment of an overhead power line.” Impact Assessment and Project Appraisal, Vol. 20, No. 1, pp. 39–47.
Yakar, F. (2011). A geographical information based multi criteria model including also environmental criteria for highway alignment determination process, PhD Thesis, Karadeniz Technical University, Graduate School of Natural and Applied Sciences, Trabzon (in Turkish).
Yildirim, V. (2009). Development of a raster based dynamic model with geographical information system for the determination of natural gas transmission pipelines, PhD Thesis, Karadeniz Technical University, Graduate School of Natural and Applied Sciences, Trabzon (in Turkish).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yakar, F., Celik, F. A highway alignment determination model incorporating GIS and Multi-Criteria Decision Making. KSCE J Civ Eng 18, 1847–1857 (2014). https://doi.org/10.1007/s12205-014-0130-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-014-0130-1