Abstract
The development of Chinese construction industry is strongly influenced by geographic locations. And it shows an obvious ladder-like distribution showing a decreasing trend from the east to the middle and the west. The persistent occurrence and excessive expansion of such differences not only affects the overall efficiency of the construction industry’s development, but also reflects an inefficient allocation of resources. Based on this, we attempt to combine multiple attribute model with time series and convergence models, make the regional difference and spatial convergence analysis of the development potential of Chinese construction industry and describe the differences of the development potential for the construction industry existing in the three examined regions of China. So decision makers can be provided with an accurate and reliable basis. The research indicates that in the new century, all the regions in China show an enormous potential for the growth of a highly developed construction industry. The west has the greatest development potential, with the middle following behind closely; Compared with this, the east is the weakest. It also finds that there is an absolute convergence in the development potential of the Chinese construction industry. Furthermore, it formulates the club convergence for the east, the middle and the west. The effective combination of multiple attribute model with time series, absolute convergence and club convergence models can avoid the shortcoming of the subjective weighting method and realize the innovation of the research methods for the development potential of construction industry.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Allen, S. G. (1985). “Why construction industry productivity is declining.” The Review of Economics and statistics, Vol. 67, No. 4, pp. 661–669.
Arditi, D., Kale, S., and Tankgar, M. (1997). “Innovation in construction equipment and its flow into the construction industry.” Journal of Construction Engineering and Management, Vol. 123, No. 4, pp. 371–378.
Barro, R. and Sala-I-Martin, X. (1991). “Convergence across the states and regions.” Brooking Papers on Economic Activity, No. 1, pp. 107–182.
Chang, P. C., Wang, C. P., Yuan, B. J. C., and Chuang, K. T. (2002). “Forecast of development trends in Taiwan’s machinery industry.” Technological Forecasting and Social Change, Vol. 69, No. 8, pp. 781–802.
Chau, K. and Walker, A. (1988). “The measurement of total factor productivity of the Hong Kong construction industry.” Construction Management and Economics, Vol. 6, No. 3, pp. 209–224.
Chen, H. H, Wang, M. J., and Peng, Q. H. (2007). “Construction industrial competitiveness assessment (in Chinese).” Statistics and Decision, Vol. 47, No. 22, pp. 128–130.
Chen, C. J., Wu, H. L., and Lin, B. W. (2006). “Evaluating the development of high-tech industries: Taiwan’s science park.” Technological Forecasting and Social Change, Vol. 73, No. 4, pp. 452–465.
Dacy, D. C. (1965). “Productivity price trends in construction since 1947.” The Review of Economics and Statistics, Vol. 47, No. 4, pp. 406–411.
Denison, E. F. (1972). “Classification of sources of growth.” Review of Income and Wealth, Vol. 18, No. 1, pp. 1–25.
Dunning, J. H. (1992). “The competitive advantage of countries and the activities of transnational corporations.” Transnational Corporations, Vol. 23, No. 1, pp. 135–168.
Fan, J.T. (2009). China construction industry development track and the evolution of industrial organization, Shanghai Finance University Press, Shanghai.
Gao, W. and Zhou, M. (2005). “Demonstration Analysis of Distinct Economic Development Level in Jiangsu (in Chinese).” Application of Statistics and Management, Vol. 24, No. 1, pp. 5–14.
Gong, S. M. and Cheng, H. (2000). “The international competitiveness comparative analysis of China’s construction industry (in Chinese).” Construction Economics, Vol. 27, No. 1, pp. 35–38.
Grant, R.M. (1991). “Porter’s competitive advantage of nation’: An assessment.” Strategic Management Journal, Vol. 12, No. 7, pp. 535–548.
Griliche, Z. (1980). New development in productivity measurement and productivity measurement and analysis NBER studies in income and wealth, University of Chicago Press.
Ive, G., Gruneberg, S., Meikle, J., and Crosthwaite, D. (2004). Measuring the competitiveness of the UK construction industry, Department of Trade and Industry (DTI), London.
Kang, X. Z. and Zhang, Y. X. (2008). “Reviews on promoting China’s construction industry competitiveness (in Chinese).” Hubei Social Sciences, No. 6, pp. 73–75.
Koschatzky, K., Bross, U., and Stanovnik, P. (2001). “Development and innovation potential in the Slovene manufacturing industry: Analysis of an industrial innovation survey.” Technovation, Vol. 21, No. 5, pp. 311–324.
Liu, B. S. (2009). The formation mechanism study of competitiveness in China’s regional construction industry, Tianjin University, Tianjin.
Liu, G.W., He, L., and Zhou, T. (2010). “Urban real estate market potential evaluation in China (in Chinese).” Science & Technology Progress and Policy, Vol. 27, No. 19, pp. 153–158.
Liu, B. S., Wang, X. Q., and Cao, L. J. (2010). “The dynamic formation mechanism simulation study of Chinese construction industry competitiveness based on combination of SEM and SD (in Chinese).” Systems Engineering Theory & Practice, Vol. 30, No. 11, pp. 2063–2070.
Liu, B. S., Wang, X. Q., and Li, B. (2011). “Formation mechanism analysis of China’s construction industry competitiveness: Empirical research based on PLS structural equation model (in Chinese).” Journal of Applied Statistics and Management, Vol. 30, No. 1, pp. 12–22.
Liu, B. S., Wang, X.Q., Li, B., and Hu, R. H. (2011). “Competitive advantage systematic evaluation of Chinese construction industry based on principal component and DEA-DA (in Chinese).” China Civil Engineering Journal, Vol. 44, No. 2, pp. 143–150.
Mawhinney, M. (2001). “International competitiveness of Canadian construction industry.” Blackwell Science, London.
Momaya, K. and Sellby, K. (1998). “International competitiveness of Canadian construction industry: A comparison with Japan and the United States.” Canadian Journal of Civil Engineering, Vol. 25, No. 4, pp. 640–652.
National Bureau of Statistics of China (2009). Statistical communique of the people’s republic of China on the 2009 national economic and social development, China Statistics Press, Beijing.
Ofori, G. (1994). “Formulating a long-term strategy for developing the construction industry of Singapore.” Construction Management and Economics, Vol. 12, No. 3, pp. 219–231.
Ofori, G. (2003). “Framework for analysing international construction.” Construction Management and Economics, Vol. 21, No. 4, pp. 379–391.
Oz, O. (2001). “Sources of competitive advantage of Turkish construction companies in International markets.” Construction Management and Economics, Vol. 19, No. 2, pp. 135–144.
Rashid, A. A. (1990). Global strategies of construction firms, University of Reading, London.
Seymour, H. (1979). The multinational construction industry, London, Helm.
Shi, S. and Chen, H. (2006). “Research of the development potentiality of environment industries in heilongjiang based on the cobb-douglas production function (in Chinese).” China Forestry Economy, Vol. 6, pp. 19–22.
Stocks, H. K. (1981). “An examination of the productivity function.” The Review of Economics and Statistics, Vol. 63, pp. 495–502.
Wang, Z. F. (2008). “The construction of systematic index of developing potential competence in regional tourism industry (in Chinese).” East China Economic Management, No. 10, pp. 31–35.
Wang, Q. Y., Feng, X. G., and Hu, X.C. (2008). “Review of the potential of tourism industry development (in Chinese).” Inquiry into Economic Issues, No. 4, pp. 97–102.
Wang, W. X., and Li, Q. M. (2008). “The competitiveness study of Chinese construction industry Based on factor and cluster analysis (in Chinese).” Statistics and Management, Vol. 27, No. 2, pp. 359–338.
Wang, J. Y. and Ye, Y. C. (2009). “The evaluation of competitiveness in regional construction based on principal component analysis (in Chinese).” Shenzhen Polytechnic University (Natural Science), Vol. 26, No. 1, pp. 92–97.
Yao, K. Y., Jin, W. X., and Wang, Z. H. (2007). “Key influencing factors of Chinese construction industry competitiveness (in Chinese).” Construction Economics, Vol. 23, No. 4, pp. 1–4.
Yu, Q. Y. (2009). “Structural model and estimation of potential of tourism industry development (in Chinese).” Journal of East China Normal University, No. 5, pp. 114–119.
Zhi, M., Hua, G. B., and Ofori, G. (2003). “Total factor productivity growth accounting in the construction industry of Singapore.” Construction Management and Economics, Vol. 21, No. 7, pp. 707–718.
Zhou, H. J. (2006). “Study on the evaluation system of construction industry international competitiveness (in Chinese).” Construction Economics, Vol. 36, No. 2, pp. 43–44.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, B., Chen, X., Wang, X. et al. Development potential of Chinese construction industry in the new century based on regional difference and spatial convergence analysis. KSCE J Civ Eng 18, 11–18 (2014). https://doi.org/10.1007/s12205-014-0099-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-014-0099-9