Abstract
This study investigated the effect of silica fume(SF) on mechanical properties of concrete incorporating steel slag powder (SSP). The compressive strength and splitting strength tests of concrete with different content of SF (0%, 4%, 8% and 12%) and of SSP (0%, 10%, 20%, 30% and 40%) were carried out, and the test results were analyzed and fitted. Obtained results showed that the brittleness, compressive strength and compressive strength discreteness of concrete increased due to the incorporation of SF. SSP weakened the compressive strength of concrete, which reduced within 10% when the content of SSP was less than 20%. SF and SSP showed synergistic hydration effect when they were mixed, and the optimal group was SF8SSP30, whose compressive strength was close to that of plain concrete, and whose brittleness as well as discreteness of compressive strength were lower relatively. With the content of SSF and of SSP as variables, the tension-compression ratio and compressive strength of concrete can be well estimated by surface fitting.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chung C W, Shon C S, Kim Y S. Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze-thaw cycles[J]. Construction and Building Materials, 2010, 24(9): 1739–1745.
Ding J M, Geng J, Hu S G, et al. Different effects of fly ash and slag on anti-rebar corrosion ability of concrete with chloride ion[J]. Wuhan University Journal of Natural Sciences, 2009, 14(4): 355–361.
Ma X M, Ni W, Liu X. Experimental study on performance optimization of steel slag powder and preparation of non-clinker concrete[J]. Materials Review, 2016, 30(8): 135–140(Ch).
Petros E T, George D P S T, et al. Utilization of steel slag for Portland cement clinker production[J]. Journal of Hazardous Materials, 2008, 152(2): 805–811.
Lin H, Wang L, Li Y F. State of the art on workability and mechanical property of steel slag concrete[J]. Industrial Construction, 2008, 38(S1): 867–869(Ch).
Yu F, Wang X L, Zhang Y, et al. Stress-strain relationship of shrinkage compensating steel-slag concrete[J]. Journal of Building Materials, 2017, 20(4): 527–534(Ch).
Deng H B, Wang H L, Peng Q W, et al. Mechanical properties and durability of concrete modified with steel slag and silica fume[J]. Concrete, 2014, (12): 97–100(Ch).
Liu J, Guo R H. Applications of steel slag powder and steel slag aggregate in ultra-high performance concrete[J]. Advances in Civil Engineering, 2018, (11): 1–8.
Han F H, Zhang Z Q. Properties of 5-year-old concrete containing steel slag powder [J]. Powder Technology, 2018, 334: 27–35.
Cui X W, Ni W, Ren C. Hydration mechanism of all solid waste cementitious materials based on steel slag and blast furnace slag [J]. Chinese Journal of Materials Research, 2017, 31(9): 687–694(Ch).
People’s Republic of China Ministry of Construction. Standard Test Method for Mechanical Properties of Ordinary Concrete(GB/T 50081-2002)[S]. Beijing: China Building Industry Press, 2002(Ch).
Watcharapong W, Arnon C. Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume[J]. Materials Science and Engineering A, 2010, 527(16-17): 3676–3684.
Watcharapong W, Pailyn T, Athipong N, et al. Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume[J]. Materials and Design, 2014, 64: 261–269.
Hao B B, Gong A M, Peng Y L, et al. Influence of silica content on mechanical properties of steel fiber and silica concrete[J]. Water Resources and Power, 2016, 34(9): 144–147.
He Z, Yang H M, Hu S G, et al. Hydration mechanism of silica fume-sulphoaluminate cement[J]. Journal of Wuhan University of Technology (Materials Science Edition), 2013, 28(6): 1128–1133.
He Z, Chen X R, Yang H M, et al. Hydro-abrasive erosion of concrete incorporated with nano-SiO2, super-fine slag or rubber powder[J]. Wuhan University Journal of Natural Sciences, 2013, 18(6): 535–540.
Li H Y, Wang Y, Xie H Y, et al. Micro structure analysis of reactive powder concrete after exposed to high temperature [J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2012, 40(5): 71–75 (Ch).
Yang K, Qiu X J, Li Y R, et al. Influence of mineral admixture on resistance to sulfate attack of cement mortar[J]. Railway Engineering, 2017, 57(9): 143–148.
Cheng H L, Yang F H, Ma B G, et al. Composite activation of high alumina coal gangue and analysis on its pozzolanic effect[J]. Journal of Building Materials, 2016, 19(2): 248–254(Ch).
Guo Y Z, Wang Q C, Wang Y T, et al. Pozzolanic effect of composite mineral admixture under different water cement ratio[J]. Concrete, 2017, (8): 42–45(Ch).
Author information
Authors and Affiliations
Corresponding author
Additional information
Biography: LUO Xiaobao, male, Master candidate, research direction: new concrete materials.
Rights and permissions
About this article
Cite this article
Luo, X., Si, Y. & Gu, W. Effect of Silica Fume on Mechanical Properties of Concrete Incorporating Steel Slag Powder. Wuhan Univ. J. Nat. Sci. 24, 86–92 (2019). https://doi.org/10.1007/s11859-019-1372-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11859-019-1372-z