Abstract
A process based on the use of a plasma system for recovering aluminum from dross, beverage cans, and aluminum scrap has been developed. The plasma process is clean, and there is no need for the addition of any compound, such as salt. In principle, a higher recovery rate of aluminum is attainable, since no oxidation of the aluminum occurs during the process. An economic analysis shows that the operating costs for the plasma system are at least 23% cheaper than for the traditional process using air/gas or ail/oil burners; the plasma process also does not generate either of the common residues produced by the burners. The maintenance costs of the plasma process are also lower than that of the traditional process. Overall, the plasma system is cheaper, cleaner, and easier than the oil/gas burner technology when recovering aluminum from dross, beverage cans, and scrap.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ABAL—Anual statistic, Associação Brasileira do Alumínio, 1996.
R.N. Szente, “Industrial Applications of Thermal Plasmas,” AIAA Conference (Brazil: Foz de Iguaçu, 1995), pp. 1441–1445.
D. MacRae and J. Goodwill, “Status of Thermal Plasma Technology in North America,” Proc. 1st Int. EPRI Plasma Symposium (Palo Alto, CA: EPRI, 1990), pp.5-1–5-18.
R.W. Smith, “Emerging U.S. Thermal Plasma Materials Processing Research and Development,” World Progress in Plasma Applications (Palo Alto, CA: ABAL, 1993).
L.S. Carvalho, “Remelt of Aluminum Scrap: Melting Loss Issues,” Proc. III International Aluminum Recycling Seminar (São Paulo, Brazil: ABAL, 1996), pp. 53–64.
D.S. Gwinner, “Environmental Issues in the Aluminum Reclamation Industry,” Proc. III International Aluminum Recycling Seminar (São Paulo, Brazil: ABAL, 1996), pp. 39–52.
G.J. Kulik and J.C. Daley, “Aluminum Dross Processing in the 90’s,” Proc. Second International Symposium—Recycling of Metals and Engineered Materials (Warrendale, PA: TMS, 1990), pp. 427–438.
W.S. Couto, President Italum—Aluminum Remelter, private communication (1995).
Author information
Authors and Affiliations
Additional information
R.N. Szente earned his Ph.D. in chemical engineering at McGill University in 1990. He is currently head of the plasma group at the Instituto de Pesquisas Tecnológicas de São Paulo (IPT) and assistant professor at the Physics Institute of the University of São Paulo.
R.A. Schroeter earned his B.S. in mechanical engineering from Escola Politécnica da Universidade de São Paulo in 1988. He is currently a researcher at IPT.
M.G. Garcia earned his B.S. in electrical engineering from Escola de Engenharia de Mauá in 1986. He is currently a researcher at IPT.
O.W. Bender earned his M.Sc. in plasma physics from Universidade de São Paulo in 1986. He is currently a researcher at IPT.
Rights and permissions
About this article
Cite this article
Szente, R.N., Schroeter, R.A., Garcia, M.G. et al. Recovering aluminum via plasma processing. JOM 49, 52–55 (1997). https://doi.org/10.1007/s11837-997-0013-8
Issue Date:
DOI: https://doi.org/10.1007/s11837-997-0013-8