Use our pre-submission checklist
Avoid common mistakes on your manuscript.
Erratum to: JOM, Vol. 68, No. 5, 2016, pp. 1370–1375 DOI 10.1007/s11837-016-1890-5
This article was originally published without its electronic supplementary material. The ESM can be found here.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Vastola, G., Zhang, G., Pei, Q.X. et al. Erratum to: Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting. JOM 68, 2296 (2016). https://doi.org/10.1007/s11837-016-1990-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-016-1990-2