Abstract
Nanoporous gold made by dealloying silver/gold alloys is a relatively new material finding application in catalysis, sensing, and other areas. Here we discuss the metallurgical processing required to make patterned foils of nanoporous gold with large, flat grains, with which we are exploring an application as substrates for the heterogeneous nucleation of protein crystals.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Erlebacher and R. Seshadri, MRS Bulletin, 34 (2009), pp. 561–566.
J. Erlebacher et al., Nature, 410 (2001), pp. 450–453.
Y. Ding and M.W. Chen, MRS Bulletin, 34 (2009), pp. 569–576.
C. Xu et al., J. Am. Chem. Soc., 129 (2007), pp. 42–43.
R. Zeis et al., J. Catalysis, 253 (2008), pp. 132–138.
F. Mi et al., Anal. Chem., 78 (2006), pp. 7346–7350.
P.N. Ciesielski et al., ACS Nano, 2 (2008), pp. 2465–2472.
N.E. Chayen et al., J. Mol. Biol, 312 (2001), pp. 591–595.
|S| Web of Science, http://apps.isiknowleclge.com .
A.J. Forty, Nature, 282 (1979), pp. 597–598.
C. Cennini, The Craftsman’s Handbook.:The Italian “II libro dell’ arte, translated by Daniel V. Thompson, (New York: Dover Publications, 1960).
H.W. Pickering and C. Wagner, J. Electrochem. Soc., 114(1967), pp.698–706.
J. Erlebacher, J. Electrochem. Soc., 151 (2004), pp.C614–C626.
K. Sieradzki et al., J. Electrochem. Soc, 149 (2002), pp. B370–B377.
K. Sieradzki et al., Phil. Mag. A, 59 (1989), pp. 713–746.
D.M. Artymowicz et al., Phil. Mag., 89 (2009), pp. 1663–1693.
J. Rugolo et al., Nature Materials, 5 (2006), pp. 946–949.
A. Dursun et al., Electrochem. and Solid State Lett., 6 (2003), pp. B32–B34.
P.G. Vekilov et al., Acta Cryst, D58 (2002), pp. 1611–1616.
S. Ahl et al., Plasmonics, 3 (2008), pp. 13–20.
W.T. Zheng et al., ASM Alloy Phase Diagrams Center, editor-in-chief, P. Villars; section editors, H. Okamoto and K. Cenzual (Materials Park, OH: ASM International, 2006), www.asminternational.org/AsmEnterprise/APD .
Y Sun and T.J. Balk, Scripta Mat., 58 (2008), pp. 727–730.
C. Ji and P.C. Searson, Appl. Phys. Lett., 81 (2002) pp. 44374439.
E. Seker et al., Acta Mat., 56 (2008), pp. 324–332.
D. Lee et al., Scripta Mat., 56 (2007), pp. 437–440.
N.A. Senior and R.C. Newman, Nanotechnology, 17 (2006), pp. 2311–2316.
Y. Ding et al., Adv. Mat., 16 (2004), pp. 1897–1900.
F. Friedersdorf, “Stress-corrosion Cracking of Binary Noble Metal Alloys (Ph.D. thesis, Johns Hopkins University, 1994).
M. Hakamada and M. Mabuchi, Nano Lett. 6 (2006), pp. 882–885.
J. Weissmuller et al., MRS Bulletin, 34 (2009), pp. 577–586.
K. Sieradzki and R. Li, Phys. Rev. Lett., 68 (1992), pp. 1168–1171.
D.J. Bailey and E.G. Brewer, Metallurgical and Materials Trans. A, 6 (1975), pp. 403–408.
J. Snyder and J. Erlebacher, Langmuir, 25 (2009), pp. 9596–9604.
J.W. Cahn et al., Acta Mat., 54 (2006), pp. 4953–4975.
J.G. Velasco, Chem. Phys. Lett., 313 (1999), pp. 7–13.
L.H. Qian and M.W. Chen, Appl. Phys. Lett., 91 (2007), 083105.
A. Dursun et al., J. Electrochem. Soc. 150 (2003), pp. B355–B360.
P. Durkin and A.J. Forty, Phil. Mag. A, 45 (1982), pp. 95–105.
J. Snyder et al., J. Electrochem. Soc, 155 (2008), pp. C464–C473.
J. Snyder et al., Advanced Materials, 20 (2008), pp. 4883–4886.
A.M. Hodge et al., Adv. Eng. Mat., 8 (2006), pp. 853–857.
M. Hakamada and M. Mabuchi, J. Mater. Res., 24 (2009), pp. 301–304.
J. Beiner et al., J. Appl. Phys. 97 (2005), 024301.
S. Van Petegem et al., Nano Lett., 9 (2009), pp. 1158–1163.
J.C. Heyraud and J.J. Metois, Acta Met., 28 (1980), pp. 1789–1797.
C. Herring, The Physics of Power Metallurgy, ed. W.E. Kingston (New York: McGraw-Hill, 1951), pp. 143–179.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kertis, F., Snyder, J., Govada, L. et al. Structure/processing relationships in the fabrication of nanoporous gold. JOM 62, 50–56 (2010). https://doi.org/10.1007/s11837-010-0087-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-010-0087-6