Abstract
This paper will describe the efforts of the Advanced Turbine Airfoil Manufacturing Technology Program sponsored by the U.S. Department of Energy through the Oak Ridge National Laboratory and Howmet Research Corporation. The purpose of the program is to develop single-crystal and directionally solidified casting technologies to benefit Advanced Turbine Systems (ATS) industrial and utility gas turbine engines. The focus is on defining and implementing advanced Vacuum Induction Melting (VIM) furnace enhancements that provide precise control of mold temperatures during solidification. Emphasis was placed on increasing the total magnitude of thermal gradients while minimizing the difference in maximum and minimum gradients produced during the solidification process. Advanced VIM casting techniques were applied to Solar Turbines Incorporated’s Titan 130 First Stage High Pressure Turbine Blade under the ATS program. A comparison of the advanced VIM casting process to the conventional Bridgeman casting process will be presented as it pertains to the thermal gradients achieved during solidification, microstructure, elemental partitioning characterization, and solution heat treat response.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M.N. Gungor, “A Statistically Significant Experimental Technique for Investigating Microsegregation in Cast Alloys,” Metall. Trans. A, 20A (1989), p. 2529.
N. D’Souza, B.A. Shollock, and M. McLean, “Quantitative Characterisation of Microsegregation and Competitive Grain Growth in CMSX-4,” Solidification Processing 1997, ed. J. Beech and H. Johnes (Sheffield, U.K.: Department of Engineering Materials, 1997), pp. 316–342.
M.S.A. Karunaratne et al., “Modelling of the Microsegregation in CMSX-4 Superalloy and its Homogenisation during Heat Treatment,” Superalloys 2000, ed. T.M. Pollock, R.D. Kissinger, and R.R. Bowman (Warrendale, PA: TMS, 2000), p. 263.
S. Tin, T.M. Pollock, and W.T. King, “Carbon Additions and Grain Defect Formation in High Refractory Nickel-Base Single Crystal Superalloys,” in Ref. 3,, pp. 201–210.
A. Lohmüller et al., “Improved Quality and Economics of Investment Castings by Liquid Metal Cooling—The Selection of Cooling Media,” in Ref. 3,, pp. 181–188.
M. Konter, E. Kats, and N. Hofmann, “A Novel Casting Process for Single Crystal Gas Turbine Components,” in Ref. 3,, pp. 189–200.
S.U. An et al., “The Thermal Analysis of the Mushy Zone and Grain Structure Changes During Directional Solidification of Superalloys,” in Ref. 3,, pp. 247–254.
M.G. Ardakami et al., “Competitive Grain Growth and Texture Evolution during Solidification of Superalloys,” in Ref. 3,, pp. 219–228.
M. Eric Schlienger, “Closed Loop Control Techniques for the Growth of Single Crystal Turbine Components,” Superalloys 1996 (Warrendale, PA: TMS, 1996), pp. 487–495.
I.A. Wagner and P.R. Sahm, “Autonomous Directional Solidification (ADS), A Novel Casting Technique for Single Crystal Components,” Superalloys 1996 (Warrendale, PA: TMS, 1996), pp. 487–506.
Author information
Authors and Affiliations
Additional information
For more information, contact Mei Ling Clemens, Howmet Research Corporation, 1500 S. Warner Street, Whitehall, MI 49461; (231) 894-7055; e-mail mclemens@howmet.com.
Rights and permissions
About this article
Cite this article
Clemens, M.L., Price, A. & Bellows, R.S. Advanced solidification processing of an industrial gas turbine engine component. JOM 55, 27–31 (2003). https://doi.org/10.1007/s11837-003-0156-1
Issue Date:
DOI: https://doi.org/10.1007/s11837-003-0156-1