Abstract
The study of metallic foams has become attractive to researchers interested in both scientific and industrial applications. In this paper, various methods for making such foams are presented and discussed. Some techniques start from specially prepared molten metals with adjusted viscosities. Such melts can be foamed by injecting gases or by adding gas-releasing blowing agents which cause the formation of bubbles during their in-situ decomposition. Another method is to prepare supersaturated metal-gas systems under high pressure and initiate bubble formation by pressure and temperature control. Finally, metallic foams can be made by mixing metal powders with a blowing agent, compacting the mix, and then foaming the compact by melting. The various foaming processes, the foam-stabilizing mechanisms, and some known problems with the various methods are addressed in this article. In addition, some possible applications for metallic foams are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Banhart, Prog. Mater. Sci., 47 (1) (2001), in press.
P. Åsholt, Metal Foams and Porous Metal Structures, ed. J. Banhart, M.F. Ashby, and N.A Fleck (Bremen, Germany: MIT-Verlag, 1999), p. 133.
J. Wood, Metal Foams, ed. J. Banhart and H. Eifert (Bremen, Germany: MIT-Verlag, 1997), p. 31.
O. Prakash, H. Sang, and J.D. Embury, Mater. Sci. Eng., A199 (1995), p. 195.
L.D. Kenny, Mater. Sci. Forum, 217–222 (1996), p. 1883.
A.E. Simone and L.J. Gibson, Acta Mater., 46 (1998), p. 3109.
J.T. Beals and M.S. Thompson, J. Mater. Sci., 32 (1997), p. 3595.
T. Miyoshi, in Ref. 2, p. 125.
L. Ma, Z. Song, Scripta Mater., 39 (1998), p. 1523.
V. Shapovalov, Porous and Cellular Materials for Structural Applications, vol. 521, ed. D.S. Schwartz et al. (Warrendale, PA: MRS, 1998), p. 281.
F. Baumgärtner, I. Duarte, and J. Banhart, Adv. Eng. Mater., 2 (2000), p. 168.
I. Duarte and J. Banhart, Acta Mater., 48 (2000), p. 2349.
J. Banhart and J. Baumeister, J. Mater. Sci., 33 (1998), p. 1431.
T. Höpler, F. Schörghuber, and F. Simancík, in Ref. 2, p. 79.
J. Baumeister, Sandwich Construction 5, vol. I, ed. H.R. Meyer-Piening and D. Zenkert (Solihull, U.K.: EMAS Publishing, 2000), p. 339.
J. Banhart et al., Aluminium, 76 (2000), p. 491.
W. Seeliger, in Ref. 2, p. 29.
J. Banhart et al., German patent 19,813,176 (1998).
V. Gergely and T.W. Clyne, Adv. Eng. Mater., 2 (2000), p. 175.
D. Weaire and S. Hutzler, The Physics of Foams (Oxford, U.K.: Oxford University Press, 2000).
S.W. Ip, Y. Wang, and J.M. Toguri, Canadian Metallurgical Quarterly, 38 (1999), p. 81.
E.M. Levin, C.R. Robbins, and H.F. McMurdie, Phase Diagrams for Ceramists (Columbus, OH: American Ceramic Society, 1964).
T.B. Massalski, Binary Phase Diagrams (Metals Park, OH: ASM, 1983).
Y. Sugimura et al., Acta Mater., 45 (1997), p. 5245.
G. Kaptay, in Ref. 2, p. 141.
A. Irretier, P. Weferling, and J. Banhart, to be published.
P. Weigand, Untersuchung der Einflußfaktoren auf die pulvermetallurgische Herstellung von Aluminiumschäumen (Bremen, Germany: MIT-Verlag, 1999) [in German].
J. Banhart et al., Appl. Phys. Lett., (submitted October 2000)
M.F. Ashby et al., Metal Foams: a Design Guide (Boston, MA: Butterworth-Heinemann, 2000).
Author information
Authors and Affiliations
Additional information
Editor’s Note: A hypertext-enhanced version of this article can be found at www.tms.org/pubs/journals/JOM/0012/Banhart-0012.html
For more information, contact John Banhart, Fraunhofer-Institute for Manufacturing and Advanced Materials, Wiener Str. 12, 28359 Bremen, Germany; e-mail banhart@telda.net.
Rights and permissions
About this article
Cite this article
Banhart, J. Manufacturing routes for metallic foams. JOM 52, 22–27 (2000). https://doi.org/10.1007/s11837-000-0062-8
Issue Date:
DOI: https://doi.org/10.1007/s11837-000-0062-8