Abstract
The regeneration of the CO2 capture system is the most energy-intensive process associated with CO2 capture because high temperatures are required to desorb CO2 from the absorbent. We propose a single process for effective CO2 capture and mineralization as a substitute for desorption of absorbed CO2, producing high value-added CaCO3. A saturated 2-amino-2-methyl-1-propanol (AMP) solution was used as a carbonate source, and calcium chloride (CaCl2) was used as a calcium ion source to precipitate CaCO3. A semi-batch reactor was used to investigate the effects of the mixing rate, temperature, and amount of calcium added during the CaCO3 precipitation process. During the mineralization reaction, the absorbed CO2 in AMP solution instantly converted into white CaCO3 precipitant with 97.4% conversion. The stirring rate provided a reciprocal effect on the crystal size, whereas the temperature and Ca/CO2 molar ratio appeared to affect the crystal morphology.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
M. Lucquiaud and J. Gibbins, Chem. Eng. Res. Des., 89, 1553 (2011).
M. Wang, A. Lawal, P. Stephenson, J. Sidders and C. Ramshaw, Chem. Eng. Res. Des., 89, 1609 (2011).
J. Lim, D. H. Kim, Y. Yoon, S. K. Jeong, K. T. Park and S. C. Nam, Energy Fuels, 26, 3910 (2012).
S. S. Warudkar, K. R. Cox, M. S Wong and G. J. Hirasaki, Int. J. Greenh. Gas. Con., 16, 342 (2013).
H. Dang and G. T. Rochelle, Sep. Sci. Technol., 38, 337 (2003).
S. Bishnoi and G. T. Rochelle, AIChE J., 48, 2788 (2002).
S. Bishnoi and G. T. Rochelle, Ind. Eng. Chem. Res., 41, 604 (2002).
G. Sartori, W. S. Ho, D. W. Savage, G. R. Chludzinski and S. Wiechert, Sep. Purif. Methods, 16, 171 (1986).
J. M. Beér, Prog. Energy Combust. Sci., 26, 301 (2000).
J. M. Beér, Prog. Energy Combust. Sci., 33, 107 (2007).
M. Karimi, M. Hillestad and H. F. Svendsen, Energy Procedia, 4, 1601 (2011).
D. H. Van Wagener and G. T. Rochelle, Chem. Eng. Res. Des., 89, 1639 (2011).
Y. Le Moullec and M. Kanniche, Int. J. Greenh. Gas Con., 5, 727 (2011).
T. Neveux, Y. Le Moullec, J. P. Corriou and E. Favre, E. Chem. Eng. Trans., 35, 337 (2013).
B. A. Oyenekan and G. T. Rochelle, AIChE J., 53, 3144 (2007).
I. L. Leites, D. A. Sama and N. Lior, Energy, 28, 55 (2003).
R. Idem, M. Wilson, P. Tontiwachwuthikul, A. Chakma, A. Veawab, A. Aroonwilas and D Gelowitz, Ind. Eng. Chem. Res., 45, 2414 (2006).
C. Domingo, E. Loste, J. Gómez-Morales, J. García-Carmona and J. Fraile, J. Supercrit. Fluid, 36, 202 (2006).
A. Sanna, M. Dri, M. R. Hall and M. Maroto-valer, Appl. Energy, 99, 545 (2012).
B. M. Bhanage and M. Arai, Transformation and Utilization of Carbon Dioxide, Springer Berlin Heidelberg, Berlin (2014).
M. Popescu, R. Isopescu, C. Matei, G. Fagarasan and V. Plesu, Adv. Powder Technol., 25, 500 (2014).
T. Thriveni, N. Um, S.-Y. Nam, Y. J Ahn, C. Han and J. W. Ahn, Korean Chem. Soc., 51, 107 (2014).
J. G. Carmona, G. Morales and R. J. Rodríguez, Colloid Interface Sci., 261, 434 (2003).
M. Ukrainczyk, J. Kontrec, V. Babić-Ivančić, L. Brečević and D. Kralj, Powder Technol., 171, 192 (2007).
B. Feng, A. K. Yong and H. An, Mater. Sci. Eng., 445, 170 (2007).
M. Vucak, J. Peric, M. N. Pons and S. Chanel, Powder Technol., 101, 1 (1999).
G. Draz, J. Prah and J. Mac, J. Cryst. Growth, 324, 229 (2011).
M. Vinoba, M. Bhagiyalakshmi, A. N. Grace, D. H. Chu, S. C. Nam, Y. Yoon, S. H. Yoon and S. K. Jeong, Langmuir, 29, 15655 (2013).
M. Vinoba, M. Bhagiyalakshmi, S. Y. Choi, K. T. Park, H. J. Kim and S. K. Jeong, J. Phys. Chem., 118, 17556 (2014).
B. B. Schroeder, D. D. Harris, S. T. Smith and D. O. Lignell, Cryst. Growth Des., 14, 1756 (2014).
M. Torbacke and Å. C. Rasmuson, AIChE J., 50, 3107 (2004).
R. Beck and J.-P. Andreassen, AIChE J., 58, 107 (2012).
M. Kitamura, Cryst. Eng. Comm., 11, 949 (2009).
A. M. López-periago, R. Pacciani, C. García-gonzález, L. F. Vega and C. Domingo, J. Supercrit. Fluid, 52, 298 (2010).
Y. E. Kim, J. A. Lim, S. K. Jeong, Y. I. Yoon, S. T. Bae and S. C. Nam, Bull. Korean Chem. Soc., 34, 783 (2013).
A. M. Shariff, G. Murshid, K. K. Lau, M. A. Bustam and F. Ahmad, World Acad Sci. Eng. Technol., 60, 1050 (2011).
M. Kitamura, J. Cryst. Growth, 239, 2205 (2002).
C. Y. Tai, P. Chen and S. Shih, AIChE J., 39, 1472 (1993).
J. Kawano, N. Shimobayashi, M. Kitamura and K. Shinoda, J. Cryst. Growth, 239, 419 (2002).
J. Schlomach, K. Quarch and M. Kind, Chem. Eng. Technol., 29, 215 (2006).
H. D. Keith and F. J. Padden Jr., J. Appl. Phys., 34, 2409 (1963).
J. W. Ahn, J. H. Kim, H. S. Park, J. A. Kim, C. Han and H. Kim, Korean J. Chem. Eng., 22, 852 (2005).
T. Jung, W. Kim and C. K. Choi, Cryst. Res. Technol., 40, 586 (2005).
Y. S. Han, G. Hadiko, M. Fuji and M. Takahashi, J. Cryst. Growth, 276, 541 (2005).
O. Söhnel and J. W. Mullin, J. Cryst. Growth, 60, 239 (1982).
J. A. Onimisi, R. Ismail, K. S. Ariffin, N. Baharun and H. Bin Hussin, Korean J. Chem. Eng., 33, 2756 (2016).
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper is reported in the 11th China-Korea Clean Energy Workshop.
Rights and permissions
About this article
Cite this article
Murnandari, A., Kang, J., Youn, M.H. et al. Effect of process parameters on the CaCO3 production in the single process for carbon capture and mineralization. Korean J. Chem. Eng. 34, 935–941 (2017). https://doi.org/10.1007/s11814-016-0340-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-016-0340-y