Abstract
Two novel cardanol-based polyols were synthesized and used to construct polyurethane (PU) foams. The cardanol-based polyols with high reactivity were obtained from the epoxidation of cardanol, followed by the ring opening reaction of epoxy group with diethanolamine (DEA). Subsequently, PU foams were synthesized by these cardanolbased polyols. Compared with petroleum-based (PEG) PU foams, these green cardanol-based PU foams exhibit better mechanical property and higher thermostability. Scanning electron microscopy (SEM) tests show that the cells of cardanol-based PU foams are monodisperse, with fairly uniform spherical shape and regular size.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. W. Engel, H. G. Pirkl, R. Albers, R. W. Albach, J. Krause, H. Andreas, C. Holger and D. Jeff, Angew. Chem. Int. Ed., 52, 9422 (2013).
D. A. Babb, Adv. Polym. Sci., 245, 315 (2012).
B. J. Rashmi, D. Rusu, K. Prashantha, M. F. Lacrampe and P. Krawczak, J. Appl. Polym. Sci., 128, 292 (2013).
D. Myriam, E. Maxime, A. Remi, C. Sylvain and B. Bernard, Polym. Rev., 52, 38 (2012).
S. S. Narine, X. Kong, L. Bouzidi and P. Sporns, J. Am. Oil Chem. Soc., 84, 55 (2007).
Y. Li and A. J. Ragauskas, RSC Adv., 2, 3347 (2012).
D. P. Pfister, Y. Xia and R. C. Larock, ChemSusChem, 4, 703 (2011).
Z. S. Petrovi, Polym. Rev., 48, 109 (2008).
V. S. Balachandran, S. R. Jadhav, P. K. Vemula and G. John, Chem. Soc. Rev., 42, 427 (2013).
R. Auvergne, S. Caillol, G. David, B. Boutevin and J. P. Pascault, Chem. Rev., 114, 1082 (2014).
P. P. Kumar, R. Paramashivappa, P. J. Vithayathil, R. P. V. Subba and A. R. Srinivasa, J. Agric. Food Chem., 50, 4705 (2002).
F. J. N. Maia, V. G. P. Ribeiro, D. Lomonaco, F. M. T. Luna and S. E. Mazzetto, Ind. Crop. Prod., 36, 271 (2012).
S. Mohapatra and G. B. Nando, RSC Adv., 4, 15406 (2014).
A. Greco, D. Brunetti, G. Renna, G. Mele and A. Maffezzoli, Polym. Degrad. Stab., 95, 2169 (2010).
S. Minakshi, J. S. P. Rai and D. Srivastava, Mate. Chem. Phys., 132, 180 (2012).
A. S. More, S. K. Pasale and P. P. Wadgaonkar, Eur. Polym. J., 46, 557 (2010).
K. Huang, Y. Zhang, M. Li, J. W. Lian, X. H. Yang and J. L. Xia, Prog. Org. Coat., 74, 240 (2012).
F. Cardona, A. L. K. Tak and J. Fedrigo, J. Appl. Polym. Sci., 123, 2131 (2012).
F. Jaillet, E. Darroman, A. Ratsimihety, R. Auvergne, B. Boutevin and S. Caillol, Eur. J. Lip. Sci. Technol., 116, 63 (2014).
A. Guo, W. Zhang and Z. S. Petrovic, J. Mater. Sci., 41, 4914 (2006).
L. T. Yang, C. S. Zhao, C. L. Dai, L. Y. Fu and S. Q. Lin, J. Polym. Environ., 20, 230 (2012).
B. A. Dombrow and P Polyurethanes, 2nd Ed. Reinhold Publishing Corp., New York (1965).
B. S. Rao and A. Palanisamy, Eur. Polym. J., 49, 2365 (2013).
L. Q. Zhang, M. Zhang, L. H. Hu and Y. H. Zhou, Ind. Crop. Prod., 52, 380 (2014).
K. I. Suresh, ASC Sustainable Chem. Eng., 1, 232 (2013).
B. J. Rashmi, D. Rusu, K. Prashantha, M. F. Lacrampe and P. Krawczak, J. Appl. Polym. Sci., 128, 292 (2013).
J. F. Jin, Y. L. Chen, D. N. Wang, C. P. Hu, S. Zhu, L. Vanoverloop and D. Randall, J. Appl. Polym. Sci., 84, 598 (2002).
X. W. Zou, T. F. Qin, Y. Wang, L. H. Huang, Y. M. Han and Y. Li, Bioresour. Technol., 114, 654 (2012).
S. Li, R. Vatanparast and H. Lemmetyinen, Polym., 41, 5571 (2000).
S. P. Huo, M. C. Nie, Z. W. Kong, G. M. Wu and J. Chen, J. Appl. Polym. Sci., 125, 152 (2012).
C. A. Cateto, M. F. Barreiro, A. E. Rodrigues and M. N. Belgacem, React. Funct. Polym., 71, 863 (2011).
M. J. Elwell, A. J. Ryan, H. J. M. Grünbauer and H. C. V. Lieshout, Polym., 37, 1353 (1996).
H. Han, S. H. Li, X. L. Zhu, X. B. Jiang and X. Z. Kong, RSC Adv., 4, 33520 (2014).
N. Luo, D. N. Wang and S. K. Ying, Polym., 37, 3577 (1996).
B. J. Rashmi, D. Rusu, K. Prashantha, M. F. Lacrampe and P. Krawczak, J. Appl. Polym. Sci., 128, 292 (2013).
Y. B. Mu, X. B. Wan, Z. X. Han, Y. X. Peng and S. Zhong, J. Appl. Polym. Sci., 124, 4331 (2012).
B. L. Xue, J. L. Wen and R. C. Sun, ACS Sustainable Chem. Eng., 2, 1474 (2014).
Z. Y. Lan, R. Daga, R. Whitehouse, S. McCarthy and D. Schmidt, Polym., 55, 2635 (2014).
S. Q. Tan, T. Abraham, D. Ference and C. W. Macosko, Polym., 52, 2840 (2011).
V. R. D. Silva, M. A. Mosiewicki, M. I. Yoshida, M. C. D. Silva, P. M. Stefani and N. E. Marcovich, Polym. Test., 32, 438 (2013).
M. A. Corcuera, L. Rueda, B. A. Fernandez, A. Arbelaiz, C. Marieta, I. Mondragon and A. Eceiza, Polym. Degrad. Stab., 95, 2175 (2010).
R. H. Krämer, M. Zammarano, G. T. Linteris, U. W. Gedde and J. W. Gilman, Polym. Degrad. Stab., 95, 1115 (2010).
M. Berta, C. Lindsay, G. Pans and G. Camino, Polym. Degrad. Stab., 91, 1179 (2006).
S. Duquesne, M. L. Bras, S. Bourbigot, R. Delobe, G. Camino, B. Eling, C. Lindsay and T. Roels, Polym. Degrad. Stab., 74, 493 (2011).
X. X. Kong and S. S. Narine, Biomacromolecules, 8, 2203 (2007).
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Huo, S., Wu, G., Chen, J. et al. Constructing polyurethane foams of strong mechanical property and thermostability by two novel environment friendly bio-based polyols. Korean J. Chem. Eng. 33, 1088–1094 (2016). https://doi.org/10.1007/s11814-015-0223-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-015-0223-7