Abstract
Using attapulgite (ATP) as matrix, chitosan (CS) as functional monomer, and introducing the surface ionimprinting concept, a new Cu(II)-IIP was prepared, and characterized by SEM, XRD and FT-IR. The adsorption of Cu(II) aqueous solution with Cu(II)-IIP was investigated by flame atomic adsorption spectroscopy (FAAS). The polymer has good selectivity for Cu(II) from competitive metal ions, and the selectivity coefficient of Cu(II) relation to Pb(II), Cd(II) was 78.45 and 82.44, respectively. Sorption equilibrium isotherms could be described by Langmuir and Freundlich models; the Freundlich isotherm has shown the best agreement with experimental data, and experimental value of maximum adsorption capacity for Cu(II) was 35.20 mg/g. The obtained thermodynamic parameter (ΔGo, ΔHo, ΔSo) showed that the Cu(II) adsorption process is a spontaneous and endothermic process. The kinetic data showed that pseudo-second-order kinetic model agrees very well with the dynamic behavior for the sorption of Cu(II) onto Cu(II)-IIP.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
A. Celik and A. Demirba, Energy Sources, 27, 1167 (2005).
A. Demirbas, Energy Edu. Sci. Technol., 5, 21 (2000).
A. Özer and H. Pirincci, J. Hazard. Mater., 137, 849 (2006).
J. Wang and C. Chen, Biotechnol. Adv., 27, 195 (2009).
B. Zhu, T. Fan and D. Zhang, J. Hazard. Mater., 153, 300 (2008).
A. K. Meena, K. Kadirvelu, G. Mishra, C. Rajagopal and P. Nagar, J. Hazard. Mater., 150, 604 (2008).
J. Shah, M. R. Jan, M. Sadia and H. Atta-ul-Haq, Korean J. Chem. Eng., 30, 706 (2013).
H. Kalavathy, M. I. Regupathi, M.G. Pillai and L. R. Miranda, Colloids Surf., B: Biointerfaces, 70, 35 (2009).
O. Amuda, A. A. Giwa and I. Bello, Biochem. Eng. J., 36, 174 (2007).
Y. L. Kang, M.Y. Poon, P. Monash, S. Ibrahim and P. Saravanan, Korean J. Chem. Eng., 30, 1904 (2013).
A.A. Mosa, A. El-Ghamry and P. Trüby, Water, Air, Soil Pollut., 217, 637 (2011).
M. Rashed, Int. J. Environ. Waste Manage., 7, 175 (2011).
A. Mittal, J. Mittal, A. Malviya, D. Kaur and V. Gupta, J. Colloid Interface Sci., 343, 463 (2010).
A. Saeed, M. Sharif and M. Iqbal, J. Hazard. Mater., 179, 564 (2010).
S. Khattri and M. Singh, J. Hazard. Mater., 167, 1089 (2009).
V. K. Gupta, R. Jain, M. Shrivastava and A. Nayak, J. Chem. Eng. Data, 55, 5083 (2010).
C. Pang, Y. Liu, X. Cao, R. Hua, C. Wang and C. Li, J. Radioanal. Nucl. Chem., 286, 185 (2010).
Q. Fan, X. Tan, J. Li, X. Wang, W. Wu and G. Montavon, Environ. Sci. Technol., 43, 5776 (2009).
Q. Fan, D. Shao, J. Hu, W. Wu and X. Wang, Surf. Sci., 602, 778 (2008).
L. Chen and X. Gao, Appl. Radiat. Isot., 67, 1 (2009).
Z. Niu, Q. Fan, W. Wang, J. Xu, L. Chen and W. Wu, Appl. Radiat. Isot., 67, 1582 (2009).
S. Wang, D. Yu, Y. Huang and J. Guo, J. Appl. Polym. Sci., 119, 2065 (2011).
G. Dotto and L. Pinto, Carbohydr. Polym., 84, 231 (2010).
X.Y. Huang, X.Y. Mao, H. T. Bu, X.Y. Yu, G.B. Jiang and M. H. Zeng, Carbohydr. Polym., 83, 528 (2011).
S. Kittinaovarat, P. Kansomwan and N. Jiratumnukul, Appl. Clay Sci., 48, 87 (2010).
C.M. Futalan, C. C. Kan, M. L. Dalida, K. J. Hsien, C. Pascua and M.W. Wan, Carbohydr. Polym., 83, 528 (2011).
V.M. Boddu, K. Abburi, J. L. Talbott and E.D. Smith, Environ. Sci. Technol., 37, 4449 (2003).
B. Godlewska-Żyłkiewicz, B. Leoeniewska and I. Wawreniuk, Talanta, 83, 596 (2010).
T. Prasada Rao, S. Daniel and J. Mary Gladis, TrAC, Trends Anal. Chem., 23, 28 (2004).
M. Saraji and H. Yousefi, J. Hazard. Mater., 167, 1152 (2009).
E. Zambrzycka, D. Roszko, B. Lesniewska, A. Z. Wilczewska and B. Godlewska-Zylkiewicz, Spectrochim. Acta — Part B A., 66, 508 (2011).
J. B. Wu and Y. L. Yi, Korean J. Chem. Eng., 30, 1111 (2013).
A. Kaewchada, C. Borvornpongsakul and A. Jaree, Korean J. Chem. Eng., 29, 1279 (2012).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shi, Y., Zhang, Q., Feng, L. et al. Preparation and adsorption characters of Cu(II)-imprinted chitosan/attapulgite polymer. Korean J. Chem. Eng. 31, 821–827 (2014). https://doi.org/10.1007/s11814-014-0004-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-014-0004-8