Abstract
Over 1 billion end-of-life tires (ELTs) are generating annually, and 4 billion ELTs are currently abandoned in landfills and stockpiles worldwide, according to the statistics, leading to the environmental and health risks. To circumvent these issues, pyrolysis, as an attractive thermochemical process, has been addressed to tackle the ELTs’ problem to reduce the risks as well as increase the material recycling. However, due to the lack of systematic characteristic analysis and modification methods, poor quality of CBp limits the improvement of ELTs pyrolysis in industry applications, which plays a crucial role in the economic feasibility of pyrolysis process. In this review, we have summarized the state-of-the-art characteristics and modification methodologies of the upgrading of CBp, to in-depth understand the surface microstructures and physiochemical properties of CBp for the foundation for modification afterwards. By virtue of the proper selection of modification methods and modifying agents, the new generation of multifunctional carbon materials with desired properties can be instead of the traditional materials of CB, promising broader and various application fields.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Aguado J, Serrano D P, Escola J M (2008). Fuels from waste plastics by thermal and catalytic processes: A review. Industrial & Engineering Chemistry Research, 47(21): 7982–7992
Aguado R, Olazar M, Vélez D, Arabiourrutia M, Bilbao J (2005). Kinetics of scrap tyre pyrolysis under fast heating conditions. Journal of Analytical and Applied Pyrolysis, 73(2): 290–298
Akovali G, Ulkem I (1999). Some performance characteristics of plasma surface modified carbon black in the (SBR) matrix. Polymer, 40(26): 7417–7422
Alexandre-Franco M, Fernández-González C, Alfaro-Domínguez M, Palacios Latasa J M, Gómez-Serrano V (2010). Devulcanization and demineralization of used tire rubber by thermal chemical methods: a study by x-ray diffraction. Energy & Fuels, 24(6): 3401–3409
Antoniou N, Zabaniotou A (2018). Re-designing a viable ELTs depolymerization in circular economy: Pyrolysis prototype demonstration at TRL 7, with energy optimization and carbonaceous materials production. Journal of Cleaner Production, 174: 74–86
Ariyadejwanich P, Tanthapanichakoon W, Nakagawa K, Mukai S R, Tamon H (2003). Preparation and characterization of mesoporous activated carbon from waste tires. Carbon, 41(1): 157–164
Association ETRMA (2015). End-of-life Tyre Report 2015. 2015 Edition
Atal A, Levendis Y A (1995). Comparison of the combustion behaviour of pulverized waste tyres and coal. Fuel, 74(11): 1570–1581
Atif M, Bongiovanni R, Giorcelli M, Celasco E, Tagliaferro A (2013). Modification and characterization of carbon black with mercaptopropyltrimethoxysilane. Applied Surface Science, 286: 142–148
Aylón E, Fernández-Colino A, Navarro M V, Murillo R, García T, Mastral A M (2008). Waste tire pyrolysis: comparison between fixed bed reactor and moving bed reactor. Industrial & Engineering Chemistry Research, 47(12): 4029–4033
Bae J, Jang J, Yoon S-H (2002). Cure behavior of the liquid-crystalline epoxy/carbon nanotube system and the effect of surface treatment of carbon fillers on cure reaction. Macromolecular Chemistry and Physics, 203(15): 2196–2204
Banar M, Ozkan A, Akyildiz V, Cokaygil Z, Onay O (2015). Evaluation of solid product obtained from tire-derived fuel (TDF) pyrolysis as carbon black. Journal of Material Cycles and Waste Management, 17(1): 125–134
Bandyopadhyay S, De P P, Tripathy D K, De S K (1996). Influence of surface oxidation of carbon black on its interaction with nitrite rubbers. Polymer, 37(2): 353–357
Belmont J A, Amici R M, Galloway C P (1998). Reaction of carbon black with diazonium salts, resultant carbon black products and their uses. Google Patents
Belmont J A, Amici R M, Galloway C P (1999). Reaction of carbon black with diazonium salts, resultant carbon black products and their uses. Google Patents
Belmont J A, Amici R M, Galloway C P (2000). Reaction of carbon black with diazonium salts, resultant carbon black products and their uses. Google Patents
Belmont J A, Amici R M, Galloway C P (2002). Reaction of carbon black with diazonium salts, resultant carbon black products and their uses. Google Patents
Belmont J A, Amici R M, Galloway C P (2004). Reaction of carbon black with diazonium salts, resultant carbon black products and their uses. Google Patents
Benallal B, Roy C, Pakdel H, Chabot S, Poirier M J F (1995). Characterization of pyrolytic light naphtha from vacuum pyrolysis of used tyres comparison with petroleum naphtha. Fuel, 74(11): 1589–1594
Bernardo M, Lapa N, Gonçalves M, Mendes B, Pinto F (2012). Study of the organic extraction and acidic leaching of chars obtained in the pyrolysis of plastics, tire rubber and forestry biomass wastes. Procedia Engineering, 42: 1739–1746
Boota M, Paranthaman M P, Naskar A K, Li Y, Akato K, Gogotsi Y (2015). Waste tire derived carbon-polymer composite paper as pseudocapacitive electrode with long cycle life. ChemSusChem, 8(21): 3576–3581
Brazier D W, Schwartz N V (1978). The effect of heating rate on the thermal degradation of polybutadiene. Journal of Applied Polymer Science, 22(1): 113–124
Cardona N, Campuzano F, Betancur M, Jaramillo L, Martínez J D (2018). Possibilities of carbon black recovery from waste tyre pyrolysis to be used as additive in rubber goods: A review. IOP Conference Series: Materials Science and Engineering, 437: 012012
Cataldo F (1999). Carbon black nitration and nitrosation and its application to improve the mechanical hysteresis of a rubber tread compound. Die Angewandte Makromolekulare Chemie, 270(1): 81–86
Chen W, Feng H, Shen D, Jia Y, Li N, Ying X, Chen T, Zhou Y, Guo J, Zhou M (2018). Carbon materials derived from waste tires as high-performance anodes in microbial fuel cells. Science of the Total Environment, 618: 804–809
Cheng X, Song P, Zhao X, Peng Z, Wang S (2018). Liquefaction of ground tire rubber at low temperature. Waste Management (New York, N.Y.), 71: 301–310
Conesa J A, Font R, Marcilla A (1997). Mass spectrometry validation of a kinetic model for the thermal decomposition of tyre wastes. Journal of Analytical and Applied Pyrolysis, 43(1): 83–96
Cunliffe A M, Williams P T (1998). Composition of oils derived from the batch pyrolysis of tyres. Journal of Analytical and Applied Pyrolysis, 44(2): 131–152
Cunliffe A M, Williams P T (1999). Influence of process conditions on the rate of activation of chars derived from pyrolysis of used tires. Energy & Fuels, 13(1): 166–175
Martínez J D, Puy N, Murillo R, García T, Navarro M V, Mastral A M. (2013). Waste tyre pyrolysis: A review. Renewable & Sustainable Energy Reviews, 23: 179–213
Danmaliki G I, Saleh T A (2016). Influence of conversion parameters of waste tires to activated carbon on adsorption of dibenzothiophene from model fuels. Journal of Cleaner Production, 117: 50–55
Díez C, Martínez O, Calvo L F, Cara J, Morán A (2004). Pyrolysis of tyres. Influence of the final temperature of the process on emissions and the calorific value of the products recovered. Waste Management (New York, N.Y.), 24(5): 463–469
Ding W B, Wang L, Yang Q, Xiang W D, Gao J M, Amer W A (2013). Recent research progress on polymer grafted carbon black and its novel applications. International Polymer Processing, 28(2): 132–142
Fairburn J A, Behie L A, Svrcek W Y (1990). Ultrapyrolysis of n-hexadecane in a novel micro-reactor. Fuel, 69(12): 1537–1545
Galvagno S, Casu S, Casabianca T, Calabrese A, Cornacchia G (2002). Pyrolysis process for the treatment of scrap tyres: preliminary experimental results. Waste Management (New York, N.Y.), 22(8): 917–923
González J F, Encinar J M, Canito J L, RodríGuez J J (2001). Pyrolysis of automobile tyre waste. Influence of operating variables and kinetics study. Journal of Analytical and Applied Pyrolysis, 58–59: 667–683
Gupta V K, Gupta B, Rastogi A, Agarwal S, Nayak A (2011a). A comparative investigation on adsorption performances of mesoporous activated carbon prepared from waste rubber tire and activated carbon for a hazardous azo dye—Acid Blue 113. Journal of Hazardous Materials, 186(1): 891–901
Gupta V K, Gupta B, Rastogi A, Agarwal S, Nayak A (2011b). Pesticides removal from waste water by activated carbon prepared from waste rubber tire. Water Research, 45(13): 4047–4055
Helleur R, Popovic N, Ikura M, Stanciulescu M, Liu D (2001). Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires. Journal of Analytical and Applied Pyrolysis, 58–59: 813–824
Iraola-Arregui I, Van Der Gryp P, Görgens J F (2018). A review on the demineralisation of pre- and post-pyrolysis biomass and tyre wastes. Waste Management (New York, N.Y.), 79: 667–688
Jia L C, Li Y K, Yan D X (2017). Flexible and efficient electromagnetic interference shielding materials from ground tire rubber. Carbon, 121: 267–273
Karmacharya M S, Gupta V K, Tyagi I, Agarwal S, Jha V K (2016). Removal of As(III) and As(V) using rubber tire derived activated carbon modified with alumina composite. Journal of Molecular Liquids, 216: 836–844
Kordoghli S, Khiari B, Paraschiv M, Zagrouba F, Tazerout M (2017). Impact of different catalysis supported by oyster shells on the pyrolysis of tyre wastes in a single and a double fixed bed reactor. Waste Management, 67: 288–297
Kumar R, Ansari M O, Barakat M A (2013). DBSA doped polyaniline/multi-walled carbon nanotubes composite for high efficiency removal of Cr(VI) from aqueous solution. Chemical Engineering Journal, 228: 748–755
Kyari M, Cunliffe A, Williams P T (2005). Characterization of oils, gases, and char in relation to the pyrolysis of different brands of scrap automotive tires. Energy & Fuels, 19(3): 1165–1173
Lee W H, Kim J Y, Ko Y K, Reucroft P J, Zondlo J W (1999). Surface analysis of carbon black waste materials from tire residues. Applied Surface Science, 141(1): 107–113
Li Q, Li F, Meng A, Tan Z, Zhang Y (2018). Thermolysis of scrap tire and rubber in sub/super-critical water. Waste Management (New York, N.Y.), 71: 311–319
Li S, Wan C, Wang S, Zhang Y (2016). Separation of core-shell structured carbon black nanoparticles from waste tires by light pyrolysis. Composites Science and Technology, 135: 13–20
Li S, Wan C, Wu X, Wang S (2016b). Core-shell structured carbon nanoparticles derived from light pyrolysis of waste tires. Polymer Degradation & Stability, 129: 192–198
Li S Q, Yao Q, Chi Y, Yan J H, Cen K F (2004). Pilot-scale pyrolysis of scrap tires in a continuous rotary kiln reactor. Industrial & Engineering Chemistry Research, 43(17): 5133–5145
Li W, Xie Z, Li Z (2001). Synthesis, characterization of polyacrylate-g-carbon black and its application to soap-free waterborne coating. Journal of Applied Polymer Science, 81(5): 1100–1106
López F A, Centeno T A, Alguacil F J, Lobato B (2011). Distillation of granulated scrap tires in a pilot plant. Journal of Hazardous Materials, 190(1–3): 285–292
López F A, Centeno T A, Rodríguez O, Alguacil E J (2013). Preparation and characterization of activated carbon from the char produced in the thermolysis of granulated scrap tyres. J Air Waste Manag Assoc, 63(5): 534–544
Lopez G, Olazar M, Amutio M, Aguado R, Bilbao J (2009). Influence of tire formulation on the products of continuous pyrolysis in a conical spouted bed reactor. Energy & Fuels, 23(11): 5423–5431
Manna A K, De P P, Tripathy D K, De S K (1998). Hysteresis and strain-dependent dynamic mechanical properties of epoxidized natural rubber filled with surface-oxidized carbon black. Journal of Applied Polymer Science, 70(4): 723–730
Manna A K, De P P, Tripathy D K, De S K, Chatterjee M K (1997). Chemical interaction between surface oxidized carbon black and epoxidized natural rubber. Rubber Chemistry and Technology, 70(4): 624–633
Martínez J D, Cardona-Uribe N, Murillo R, García T, López J M (2019). Carbon black recovery from waste tire pyrolysis by demineralization: Production and application in rubber compounding. Waste Management (New York, N.Y.), 85: 574–584
Mathew T, Datta R N, Dierkes W K, Talma A G, Van Ooij W J, Noordermeer J W M (2011). Plasma polymerization surface modification of carbon black and its effect in elastomers. 296(1): 42–52
Chaala A, Darmstadt H, Roy C (1996). Acid-base method for the demineralization of pyrolytic carbon black. Fuel Processing Technology, 46(1): 1–15
Medalia A I, Kraus G (1994). Science and Technology of Rubber, 2nd ed.. Mark J E, Erman B, Eirich F R, eds. San Diego: Academic Press, 387–418
Merchant A A, Petrich M A (1993). Pyrolysis of scrap tires and conversion of chars to activated carbon. AIChE Journal, 39(8): 1370–1376
Mikulova Z, Sedenkova I, Matejova L, Večeř M, Dombek V (2013). Study of carbon black obtained by pyrolysis of waste scrap tyres. Journal of thermal analysis and calorimetry, 111(2): 1475–1481
Mui E L K, Cheung W H, McKay G (2010). Tyre char preparation from waste tyre rubber for dye removal from effluents. Journal of Hazardous Materials, 175(1–3): 151–158
Murillo R, Aylón E, Navarro M V, Callén M S, Aranda A, Mastral A M (2006). The application of thermal processes to valorise waste tyre. Fuel Processing Technology, 87(2): 143–147
Murena F, Garufi E, Gioia F (1996). Hydrogenative pyrolysis of waste tyres: Kinetic analysis. Journal of Hazardous Materials, 50(2): 143–156
Murillo R, Navarro M V, García T, López J M, Callén M S, Aylón E, Mastral A M (2005). Production and application of activated carbons made from waste tire. Industrial & Engineering Chemistry Research, 44(18): 7228–7233
Nakahara M, Takada T, Kumagai H, Sanada Y (1995). Surface chemistry of carbon black through curing process of epoxy resin. Carbon, 33(11): 1537–1540
Namane A, Mekarzia A, Benrachedi K, Belhaneche-Bensemra N, Hellal A (2005). Determination of the adsorption capacity of activated carbon made from coffee grounds by chemical activation with ZnCl2 and H3PO4. Journal of Hazardous Materials, 119(1–3): 189–194
Napoli A, Soudais Y, Lecomte D, Castillo S (1997). Scrap tyre pyrolysis: Are the effluents valuable products? Journal of Analytical and Applied Pyrolysis, 40–41: 373–382
Nunes M R, Perez G M, Loguercio L F, Alves E W, Carreño N L V, Martins J L, Garcia I T S (2011). Active carbon preparation from treads of tire waste for dye removal in waste water. Journal of the Brazilian Chemical Society, 22: 2027–2035
Olazar M, Aguado R, Arabiourrutia M, Lopez G, Barona A, Bilbao J (2008). Catalyst effect on the composition of tire pyrolysis products. Energy & Fuels, 22(5): 2909–2916
Pantea D, Darmstadt H, Kaliaguine S, Roy C (2003). Heat-treatment of carbon blacks obtained by pyrolysis of used tires. Effect on the surface chemistry, porosity and electrical conductivity. Journal of Analytical and Applied Pyrolysis, 67(1): 55–76
Payne A R (1966). Effect of dispersion on dynamic properties of filler-loaded rubbers. Rubber Chemistry and Technology, 39(2): 365–374
Payne A R (1967). Dynamic properties of PBNA—natural rubber vulcanizates. Journal of Applied Polymer Science, 11(3): 383–387
Pazat A, Barrès C, Bruno F, Janin C, Beyou E (2018). Preparation and properties of elastomer composites containing “graphene”-based fillers: A review. Polymer Reviews, 58(3): 403–443
Probst N, Grivei E, Fabry F, Fulcheri L, Flamant G, Bourrat X, Schroder A (2002). Quality and performance of carbon blacks from plasma process. Rubber Chemistry and Technology, 75(5): 891–906
De Marco Rodriguez I, Laresgoiti M F, Cabrero M A, Torres A, Chomón M J, Caballero B (2001). Pyrolysis of scrap tyres. Fuel Processing Technology, 72(1): 9–22
Roy C, Chaala A, Darmstadt H (1999). The vacuum pyrolysis of used tires. Journal of Analytical and Applied Pyrolysis, 51(1): 201–221
Roy C, Chaala A, Darmstadt H, De Caumia B, Pakdel H, Yang J (2005). Rubber Recycling. Boca Raton: CRC Press Taylor & Francis Group Florida, 458–499
Roy C, Rastegar A, Kaliaguine S, Darmstadt H, Tochev V (1995). Physicochemical properties of carbon-blacks from vacuum pyrolysis of used tires. Plastics, Rubber and Composites Processing and Applications, 23(1): 21–30
Sahouli B, Blacher S, Brouers F, Darmstadt H, Roy C, Kaliaguine S (1996a). Surface morphology and chemistry of commercial carbon black and carbon black from vacuum pyrolysis of used tyres. Fuel, 75(10): 1244–1250
Sahouli B, Blacher S, Brouers F, Sobry R, Van Den Bossche G, Diez B, Darmstadt H, Roy C, Kaliaguine S (1996). Surface morphology of commercial carbon blacks and carbon blacks from pyrolysis of used tyres by small-angle X-ray scattering. Carbon, 34(5): 633–637
Saleh T A, Gupta V K, Al-Saadi A A (2013). Adsorption of lead ions from aqueous solution using porous carbon derived from rubber tires: Experimental and computational study. Journal of Colloid and Interface Science, 396: 264–269
Senneca O, Salatino P, Chirone R (1999). A fast heating-rate thermogravimetric study of the pyrolysis of scrap tyres. Fuel, 78(13): 1575–1581
Shah J, Jan M R, Mabood F, Shahid M (2006). Conversion of waste tyres into carbon black and their utilization as adsorbent. Journal of the Chinese Chemical Society, 53(5): 1085–1089
Smith Y R, Bhattacharyya D, Willhard T, Misra M (2016). Adsorption of aqueous rare earth elements using carbon black derived from recycled tires. Chemical Engineering Journal, 296: 102–111
Song P, Wan C, Xie Y, Formela K, Wang S (2018a). Vegetable derived-oil facilitating carbon black migration from waste tire rubbers and its reinforcement effect. Waste Management, 78: 238–248
Song P, Wan C, Xie Y, Zhang Z, Wang S (2018b). Stepwise exfoliation of bound rubber from carbon black nanoparticles and the structure characterization. Polymer Testing, 71: 115–124
Song P, Zhao X, Cheng X, Li S, Wang S (2018c). Recycling the nanostructured carbon from waste tires. Composites Communications, 7: 12–15
Song X H, Xu R, Lai A, Lo H L, Neo F L, Wang K (2012). Preparation and characterization of mesoporous activated carbons from waste tyre. Asia-Pacific Journal of Chemical Engineering, 7(3): 474–478
Subulan K, Taşan A S, Baykasoğlu A (2015). Designing an environmentally conscious tire closed-loop supply chain network with multiple recovery options using interactive fuzzy goal programming. Applied Mathematical Modelling, 39(9): 2661–2702
Sugatri R I, Wirasadewa Y C, Saputro K E, Muslih E Y, Ikono R, Nasir M (2018). Recycled carbon black from waste of tire industry: thermal study. Microsystem Technologies, 24(1): 749–755
Sun X, Liu J, Hong J, Lu B (2016). Life cycle assessment of Chinese radial passenger vehicle tire. International Journal of Life Cycle Assessment, 21(12): 1749–1758
Sutherland I, Sheng E, Bradley R, Freakley P (1996). Effects of ozone oxidation on carbon black surfaces. Journal of Materials Science, 31(21): 5651–5655
Tang L, Huang H (2004). An investigation of sulfur distribution during thermal plasma pyrolysis of used tires. Journal of Analytical and Applied Pyrolysis, 72(1): 35–40
Tang L, Huang H (2005). Thermal plasma pyrolysis of used tires for carbon black recovery. Journal of Materials Science, 40(14): 3817–3819
Tanthapanichakoon W, Ariyadejwanich P, Japthong P, Nakagawa K, Mukai S R, Tamon H (2005). Adsorption-desorption characteristics of phenol and reactive dyes from aqueous solution on mesoporous activated carbon prepared from waste tires. Water Research, 39(7): 1347–1353
Thomas B S, Gupta R C (2016). A comprehensive review on the applications of waste tire rubber in cement concrete. Renewable & Sustainable Energy Reviews, 54: 1323–1333
Tsubokawa N (1992). Functionalization of carbon black by surface grafting of polymers. Progress in Polymer Science, 17(3): 417–470
Ucar S, Karagoz S, Ozkan A R, Yanik J (2005). Evaluation of two different scrap tires as hydrocarbon source by pyrolysis. Fuel, 84(14–15): 1884–1892
Varaprasad K, Diwakar B S, Donoso C, Ramam K, Sadiku R (2017). Metal-oxide polymer nanocomposite films from disposable scrap tire powder/poly-epsilon-caprolactone for advanced electrical energy (capacitor) applications. Journal of Cleaner Production, 161: 888–895
Wang A (2012). Bigger, better, broader: A perspective on China’s auto market in 2020. Hong Kong: McKinsey&Company
WBCSD (2008). Managing End-of-Life Tires
Williams P T, Besler S (1995). Pyrolysis-thermogravimetric analysis of tyres and tyre components. Fuel, 74(9): 1277–1283
Williams P T, Besler S, Taylor D T (1990). The pyrolysis of scrap automotive tyres. Fuel, 69(12): 1474–1482
Williams P T, Besler S, Taylor D T, Bottrill R P (1995). Pyrolysis of automotive tyre waste. Journal of the Institute of Energy, 68(474): 11–21
Williams P T, Bottrill R P (1995). Sulfur-polycyclic aromatic hydrocarbons in tyre pyrolysis oil. Fuel, 74(5): 736–742
Williams P T, Bottrill R P, Cunliffe A M (1998). Combustion of tyre pyrolysis oil. Process Safety and Environmental Protection, 76(4): 291–301
Williams P T, Taylor D T (1993). Aromatization of tyre pyrolysis oil to yield polycyclic aromatic hydrocarbons. Fuel, 72(11): 1469–1474
Wu Z Y, Ma C, Bai Y L, Liu Y S, Wang S F, Wei X, Wang K X, Chen J S (2018). Rubber-based carbon electrode materials derived from dumped tires for efficient sodium-ion storage. Dalton transactions (Cambridge, England: 2003), 47(14): 4885–4892
Xu S, Lai D, Zeng X, Zhang L, Han Z, Cheng J, Wu R, Mašek O, Xu G (2018). Pyrolysis characteristics of waste tire particles in fixed-bed reactor with internals. Carbon Resources Conversion, 1(3): 228–237
Yan J, Yan D, Chi Y, Pei Y, Ni M, Ce K (2006). Porosity and surface chemistry properties of carbon blacks from pyrolysis of used tires in a pilot-scale rotary kiln. Journal of Zhejiang University (Engineering Science), 40(10): 1805–1810 (in Chinese)
Yazdani E, Hashemabadi S H, Taghizadeh A (2019). Study of waste tire pyrolysis in a rotary kiln reactor in a wide range of pyrolysis temperature. Waste Management (New York, N.Y.), 85: 195–201
Yuan J J, Hong R Y, Wang Y Q, Feng W G (2014). Low-temperature plasma preparation and application of carbon black nanoparticles. Chemical Engineering Journal, 253: 107–120
Zabaniotou A A, Stavropoulos G (2003). Pyrolysis of used automobile tires and residual char utilization. Journal of Analytical and Applied Pyrolysis, 70(2): 711–722
Zhang C, Liu T, Lu X (2010). Facile fabrication of polystyrene/carbon nanotube composite nanospheres with core-shell structure via self-assembly. Polymer, 51(16): 3715–3721
Zhang X, Li H, Cao Q, Jin L, Wang F (2018). Upgrading pyrolytic residue from waste tires to commercial carbon black. Waste Manag Res, 36(5): 436–444
Zhang X, Wang T, Ma L, Chang J (2008). Vacuum pyrolysis of waste tires with basic additives. Waste Management (New York, N.Y.), 28(11): 2301–2310
Zhao P, Han Y, Dong X, Zhang C, Liu S (2015). Application of activated carbons derived from scrap tires as electrode materials for super-capacitors. ECS Journal of Solid State Science and Technology: JSS, 4(7): M35–M40
Zhi M, Yang F, Meng F, Li M, Manivannan A, Wu N (2014). Effects of pore structure on performance of an activated-carbon supercapacitor electrode recycled from scrap waste tires. ACS Sustainable Chemistry & Engineering, 2(7): 1592–1598
Zhou J, Wang J, Ren X, Yang Y, Jiang B (2006). Surface modification of pyrolytic carbon black from waste tires and its use as pigment for offset printing ink. Chinese Journal of Chemical Engineering, 14(5): 654–659
Zhou J, Yu T, Wu S, Xie Z, Yang Y (2010). Inverse gas chromatography investigation of rubber reinforcement by modified pyrolytic carbon black from scrap tires. Industrial & Engineering Chemistry Research, 49(4): 1691–1696
Acknowledgements
This study was funded by Shanghai Municipal Education Commission-Gaofeng Environment and Ecology Grant Support (No. HJGFXK-2017-002). The authors would like to thank the anonymous reviewers for valuable comments.
Author information
Authors and Affiliations
Corresponding author
Additional information
Highlights
• Modification methodologies of upgrading CBp from ELTs were reviewed.
• Surface microstructures and physiochemical properties of CBp were analyzed.
• Future perspectives of ELTs pyrolysis industries were suggested.
Rights and permissions
About this article
Cite this article
Yu, J., Xu, J., Li, Z. et al. Upgrading pyrolytic carbon-blacks (CBp) from end-of-life tires: Characteristics and modification methodologies. Front. Environ. Sci. Eng. 14, 19 (2020). https://doi.org/10.1007/s11783-019-1198-0
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11783-019-1198-0