Abstract
The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius (RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
KURVINEN E, SOPANEN J, MIKKOLA A. Ball bearing model performance on various sized rotors with and without centrifugal and gyroscopic forces [J]. Mechanism and Machine Theory, 2015, 90: 240–260.
NAKHAEINEJAD M, BRYANT M D. Dynamic modeling of rolling element bearings with surface contact defects using bond graphs [J]. Journal of Tribology, 2011, 133: 1–12.
ZHAO C J, YU X K, HUANG Q X, GE S D, GAO X. Analysis on the load characteristics and coefficient of friction of angular contact ball bearing at high speed [J]. Tribology International, 2015, 87: 50–56.
COUSSEAU T, GRAÇA B, CAMPOS A, SEABRA J. Friction torque in grease lubricated thrust ball bearings [J]. Tribology International, 2011, 44(5): 523–531.
GUO Y, PARKER R G. Stiffness matrix calculation of rolling element bearings using a finite element/contact mechanics model [J]. Mechanism and Machine Theory, 2012, 51: 32–45.
SHENG X, LI B Z, WU Z P, LI H Y. Calculation of ball bearing speed-varying stiffness [J]. Mechanism and Machine Theory, 2014, 81: 166–180.
EBERT F J. Fundamentals of design and technology of rolling element bearings [J]. Chinese Journal of Aeronautics, 2010, 23(1): 123–136.
BRANCH N A, ARAKERE N K, FORSTER N, VAUGHN S. Critical stresses and strains at the spall edge of a case hardened bearing due to ball impact [J]. International Journal of Fatigue, 2013, 47: 268–278.
KAPPAGANTHU K, NATARAJ C. Nonlinear modeling and analysis of a rolling element bearing with a clearance [J]. Communications in Nonlinear Science and Numerical Simulation. 2011, 16(10): 4134–4145.
ALBERT V K, ANDREY A K, RADOSLAV K. Character of distribution of the load between the balls in the ball bearings under the action combined of external load [J]. Mechanism and Machine Theory, 2014, 81: 54–61.
WANG Y S, YUAN Q Q. Contact force distribution and static load-carrying capacity of large size double row four-point contact ball bearing [J]. Defence Technology, 2013, 9: 229–236.
WANG Y S, CAO J W. Determination of the precise static loadcarrying capacity of pitch bearings based on static models considering clearance [J]. International Journal of Mechanical Sciences, 2015, 100: 209–215.
YOU H Y, ZHU C X, LI W X. Contact analysis on large negative clearance four-point contact ball bearing [J]. Procedia Engineering, 2012, 37: 174–178.
AYDIN G, JASON T, DREYER R S. Effect of bearing preloads on the modal characteristics of a shaft-bearing assembly: Experiments on double row angular contactball bearings [J]. Mechanical Systems and Signal Processing, 2012, 31: 176–195.
TAKABI J, KHONSARI M M. Experimental testing and thermal analysis of ball bearings [J]. Tribology International, 2013, 60: 93–103.
JIN C, WU B, HU Y. Heat generation modeling of ball bearing based on internal load distribution [J]. Tribology International, 2012, 45: 8–15.
WANG Y L, WANG W Z, ZHANG S G, ZHAO Z Q. Investigation of skidding in angular contact ball bearings under high speed [J]. Tribology International, 2015, 92: 404–417.
JACOBS W, BOONEN R, SAS P, MOENS D. The influence of the lubricant film on the stiffness and damping characteristics of a deep groove ball bearing [J]. Mechanical Systems & Signal Processing, 2014, 42(s1/2): 335–350.
QIAN D S, PAN Y. 3D coupled macro-microscopic finite element modelling and simulation for combined blank-forging and rolling process of alloy steel large ring [J]. Computational Materials Science. 2013, 70: 24–36.
QIAN D S, ZHANG Z Q, HUA L. An advanced manufacturing method for thick-wall and deep-groove ring-combined ring rolling [J]. Journal of Materials Processing Technology, 2013, 213: 1258–1267.
QIAN D S, HUA L, DENG J D. FE analysis for radial spread behavior in three-roll cross rolling with small-hole and deep-groove ring [J]. Transactions of Nonferrous Metals Society of China, 2012, 22: 247–253.
ZHOU G, HUA L, QIAN D S, SHI D F, LI H X. Effects of axial rolls motions on radial-axial rolling process for large-scale alloy steel ring with 3D coupled thermo-mechanical FEA [J]. International Journal of Mechanical Science, 2012, 59: 1–7.
HAN X H, HUA L. Friction behaviors in cold rotary forging of 20CrMnTi alloy [J]. Tribology International, 2012, 55: 29–39.
HAN X H, HUA L. 3D FE modeling of cold rotary forging of a ring workpiece [J]. Journal of Materials Processing Technology, 2009, 209: 5353–5362.
HAN X H, HUA L, ZHUANG W H, ZHANG X C. Process design and control in cold rotary forging of non-rotary gear parts [J]. Journal of Materials Processing Technology, 2014, 214: 2402–2416.
American National Standards Institute (ANSI/ABMA) Std 20-1996. Radial bearings of ball, cylindrical roller, and spherical roller types [S].
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, L., Deng, S. & Li, Hx. Numerical analysis of loaded stress and central displacement of deep groove ball bearing. J. Cent. South Univ. 23, 2542–2549 (2016). https://doi.org/10.1007/s11771-016-3315-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-016-3315-6