Abstract
Ultrafine-grained (UFG) high purity aluminum exhibits a variety of attractive mechanical properties and special deformation behavior. Equal channel angular pressing (ECAP) process can be used to easily and effectively refine metals. The microstructure and microtexture evolutions and grain boundary characteristics of the high purity aluminum (99.998%) processed by ECAP at room temperature are investigated by means of TEM and EBSD. The results indicate that the shear deformation resistance increases with repeated EACP passes, and equiaxed grains with an average size of 0.9 μm in diameter are formed after five passes. Although the orientations distribution of grains tends to evolve toward random orientations, and microtextures (80°, 35°, 0°), (40°, 75°, 45°) and (0°, 85°, 45°) peak in the sample after five passes. The grain boundaries in UFG aluminum are high-angle geometrically necessary boundaries. It is suggested that the continuous dynamic recrystallization is responsible for the formation of ultrafine grains in high purity aluminum. Microstructure evolution in the high purity aluminum during ECAP is proposed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ESTRIN Y, MURASHKIN M, VALIEV R. Ultrafine-grained aluminum alloys: Processes, structural features and properties [C]// LUMLEY R. Fundamentals of Aluminum Metallurgy: Production, Processing and Applications. Cambridge: Woodhead Publ Ltd, 2011: 468–503.
KUMAR S R, GUDIMETLA K, VENKATACHALAM P, RAVISANKAR B, JAYASANKAR K. Microstructural and mechanical properties of Al 7075 alloy processed by equal channel angular pressing [J]. Materials Science and Engineering A, 2012, 533: 50–54.
QIAN T, MARX M, SCHULER K, HOCKAUF M, VEHOFF H. Plastic deformation mechanism of ultra-fine-grained AA6063 processed by equal-channel angular pressing [J]. Acta Materialia, 2010, 58(6): 2112–2123.
ZHAO Jun, WANG Zhen-hua, SUN Shu-hua, ZHAO De-li, REN Li-guo, FU Wan-tang. A new method of characterizing equivalent strain for equal channel angular processing [J]. Journal of Central South University of Technology, 2009, 16(3): 349–353.
VEVEÇKA A, CABIBBO M, LANGDON T G. A characterization of microstructure and microhardness on longitudinal planes of an Al-Mg-Si alloy processed by ECAP [J]. Materials Characterization, 2013, 84: 126–133.
ZHOU Yin-yu, LIU Fang, DU Fei-peng. Finite element analysis for effect of die parameters on deformation of equal channel angular pressing of pure titanium [J]. Journal of Materials and Metallurgy, 2014, 13(1): 66–70. (in Chinese)
HEBESBERGER T, STUWE H P, VORHAUER A, WETSCHER F, PIPPAN R. Structure of Cu deformed by high pressure torsion [J]. Acta Materialia, 2005, 53(2): 393–402.
AAL M I A E, KIM H S. Wear properties of high pressure torsion processed ultrafine grained Al-7%Si alloy [J]. Materials and Design, 2014, 53: 373–382.
ZHANG Zi-zhao, XU Xiao-chang, HU Nan, QU Xiao, CHEN Zhen-xiang. Re-ageing behavior of Al-Cu alloy after re-dissolution of precipitated phases caused by severe plastic deformation [J]. Journal of Central South University, 2010, 41(5): 1782–1790. (in Chinese)
WANG Bing-feng, LIU Zhao-lin, LI Juan. Microstructure evolution in AISI201 austenitic stainless steel during the first compression cycle of multi-axial compression [J]. Materials Science and Engineering A, 2013, 568: 20–24.
SU Li-hong, LU Cheng, LI Hui-jun, DENG Guan-yu, TIEU K. Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding [J]. Materials Science and Engineering A, 2014, 614: 148–155.
ROY S, NATARAJ B R, SUWAS S, KUMAR S, CHATTOPADHYAY K. Accumulative roll bonding of aluminum alloys 2219/5086 laminates: Microstructural evolution and tensile properties [J]. Materials and Design, 2012, 36: 529–539.
TALACHI A K, EIZADJOU M, MANESH H D, JANGHORBAN K. Wear characteristics of severely deformed aluminum sheets by accumulative roll bonding (ARB) process [J]. Materials Characterization, 2011, 62(1): 12–21.
IWAHASHI Y, HORITA Z, NEMOTO M, LANGDON T G. An investigation of microstructural evolution during equal-channel angular pressing [J]. Acta Materialia, 1997, 45(11): 4733–4741.
SALEM A A, LANGDON T G, MCNELLEY T R, KALIDINDI S R, SEMIATIN S L. Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminum [J]. Metallurgical and Materials Transaction A, 2006, 37(9): 2879–2891.
QU Shen, AN Xiang-hai, YANG Hua-jie, HUANG Chong-xiang, YANG Gang, ZANG Qi-shan, WANG Zhong-guang, WU Shi-ding, ZHANG Zhe-feng. Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing [J]. Acta Materialia, 2009, 57(5): 1586–1601.
XU W, WU X, CALIN M, STOICA M, ECKERT J, XIA K. Formation of an ultrafine-grained structure during equal-channel angular preßsing of a ß-titanium alloy with low phase stability [J]. Scripta Materialia, 2009, 60(11): 1012–1015.
LIN Zheng-jie, WANG Li-qiang, XUE Xiao-bing, LU Wei-jie, QIN Ji-ning, Zhang Di. Microstructure evolution and mechanical properties of a Ti-35Nb-3Zr-2Ta biomedical alloy processed by equal channel angular pressing (ECAP) [J]. Materials Science and Engineering C, 2013, 33(8): 4551–4561.
CHANG J Y, YOON J S, KIM G H. Development of submicron sized grain during cyclic equal channel angular pressing [J]. Scripta Materialia, 2001, 45(3): 347–354.
IWAHASHI Y, WANG Jing-tao, HORITA Z J, NEMOTO M, LANGDON T G. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials [J]. Scripta Materialia, 1996, 35(2): 143–146.
LIU Qing, HANSEN N. Geometrically necessary boundaries and incidental dislocation boundaries formed during cold deformation [J]. Scripta Metallurgica et Materialia, 1995, 32(8): 1289–1295.
DUDOVA N, BELYAKOV A, SAKAI T, KAIBYSHEV R. Dynamic recrystallization mechanisms operating in a Ni-20%Cr alloy under hot-to-warm working [J]. Acta Materialia, 2010, 58(10): 3624–3632.
DOHERTY R D, HUGHES D A, HUMPHREYS F J, JONAS J J, JUUL JENSEN D, KASSNER M E, KING W E, MCNELLEY T R, MCQUEEN H J, ROLLETT A D. Current issues in recrystallization: A review [J]. Materials Science and Engineering A, 1997, 238(2): 219–274.
BELYAKOV A, GAO W, MIURA H, SAKAI T. Strain-induced grain evolution in polycrystalline copper during warm deformation [J]. Metallurgical and Materials Transactions A, 1998, 25(12): 2957–2965.
HUMPHREYS F J, PRANGNELL P B, PRIESTNER R. Fine-grained alloys by thermomechanical processing [J]. Current Opinion in Solid State and Materials Science, 2001, 5(1): 15–21.
CHENG Wei-li, LI Jia-wei, QUE Zhong-ping, ZHANG Jin-shan, XU Chun-xiang, LIANG Wei, YOU B S, PARK S S. Microstructure, texture and tensile properties of Mg-10Sn alloys extruded in different conditions [J]. Journal of Central South University, 2013, 20(7): 1786–1791.
GOURDET S, MONTHEILLET F. An experimental study of the recrystallization mechanism during hot deformation of aluminum [J]. Materials Science and Engineering A, 2000, 283(1/2): 274–288.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project(12JJ2028) supported by the Hunan Provincial Natural Science Foundation of China; Project(201308430093) supported by the China Scholarship Council; Projects(201012200006, 2013zzts185, 2012zzts066) supported by the Freedom Explore Program of Central South University, China
Rights and permissions
About this article
Cite this article
Wang, Bf., Sun, Jy., Zou, Jd. et al. Mechanical responses, texture and microstructural evolution of high purity aluminum deformed by equal channel angular pressing. J. Cent. South Univ. 22, 3698–3704 (2015). https://doi.org/10.1007/s11771-015-2912-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-015-2912-0