Abstract
The development of a miniature triaxial apparatus is presented. In conjunction with an X-ray microtomography (termed as X-ray μCT hereafter) facility and advanced image processing techniques, this apparatus can be used for in situ investigation of the micro-scale mechanical behavior of granular soils under shear. The apparatus allows for triaxial testing of a miniature dry sample with a size of 8 mm × 16 mm (diameter × height). In situ triaxial testing of a 0.4–0.8 mm Leighton Buzzard sand (LBS) under a constant confining pressure of 500 kPa is presented. The evolutions of local porosities (i.e., the porosities of regions associated with individual particles), particle kinematics (i.e., particle translation and particle rotation) of the sample during the shear are quantitatively studied using image processing and analysis techniques. Meanwhile, a novel method is presented to quantify the volumetric strain distribution of the sample based on the results of local porosities and particle tracking. It is found that the sample, with nearly homogenous initial local porosities, starts to exhibit obvious inhomogeneity of local porosities and localization of particle kinematics and volumetric strain around the peak of deviatoric stress. In the post-peak shear stage, large local porosities and volumetric dilation mainly occur in a localized band. The developed triaxial apparatus, in its combined use of X-ray μCT imaging techniques, is a powerful tool to investigate the micro-scale mechanical behavior of granular soils.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lee K L, Farhoomand I. Compressibility and crushing of granular soil in anisotropic triaxial compression. Canadian Geotechnical Journal, 1967, 4(1): 68–86
Fragaszy R J, Voss M E. Undrained compression behavior of sand. Journal of Geotechnical Engineering, 1986, 112(3): 334–347
Arshad M I, Tehrani F S, Prezzi M, Salgado R. Experimental study of cone penetration in silica sand using digital image correlation. Geotechnique, 2014, 64(7): 551–569
Wang J, Yan H. DEM analysis of energy dissipation in crushable soils. Soil and Foundation, 2012, 52(4): 644–657
Wang J, Yan H. On the role of particle breakage in the shear failure behavior of granular soils by DEM. International Journal for Numerical and Analytical Methods in Geomechanics, 2013, 37(8): 832–854
Coop M R, Sorensen K K, Bodas Freitas T, Georgoutsos G. Particle breakage during shearing of a carbonate sand. Geotechnique, 2004, 54(3): 157–163
Cavarretta I, Coop M R, O’Sullivan C. The influence of particle characteristics on the behaviour of coarse grained soils. Geotechnique, 2010, 60(6): 413–423
Senetakis K, Coop M R. Micro-mechanical experimental investigation of grain-to-grain sliding stiffness of quartz minerals. Experimental Mechanics, 2015, 55(6): 1187–1190
Cundall P A, Strack O D. A discrete numerical model for granular assemblies. Geotechnique, 1979, 29(1): 47–65
Iwashita K, Oda M. Rolling resistance at contacts in simulation of shear band development by DEM. Journal of Engineering Mechanics, 1998, 124(3): 285–292
Jiang M J, Yu H S, Harris D. A novel discrete model for granular material incorporating rolling resistance. Computers and Geotechnics, 2005, 32(5): 340–357
Zhou B, Huang R, Wang H, Wang J. DEM investigation of particle anti-rotation effects on the micromechanical response of granular materials. Granular Matter, 2013, 15(3): 315–326
Matsushima T, Saomoto H. Discrete element modeling for irregularly-shaped sand grains. In: Proc. NUMGE2002: Numerical Methods in Geotechnical Engineering, 2002, 239–246
Price M, Murariu V, Morrison G. Sphere clump generation and trajectory comparison for real particles. In: Proceedings of Discrete Element Modelling, 2007
Ferellec J, McDowell G. Modelling realistic shape and particle inertia in DEM. Geotechnique, 2010, 60(3): 227–232
Ng T T. Fabric study ofgranular materials after compaction. Journal of Engineering Mechanics, 1999, 125(12): 1390–1394
Cleary P W. The effect of particle shape on simple shear flows. Powder Technology, 2008, 179(3): 144–163
Oda M. Initial fabrics and their relations to mechanical properties of granular material. Soils and Foundations, 1972, 12(1): 17–36
Konagai K, Tamura C, Rangelow P, Matsushima T. Laser-aided tomography: A tool for visualization of changes in the fabric of granular assemblage. Structural Engineering/Earthquake Engineering, 1992, 9(3): 193–201 (in Japanese)
Johns R A, Steude J S, Castanier L M, Roberts P V. Nondestructive measurements of fracture aperture in crystalline rock cores using X ray computed tomography. Journal of Geophysical Research. Solid Earth, 1993, 98(B2): 1889–1900
Ohtani T, Nakano T, Nakashima Y, Muraoka H. Three-dimensional shape analysis of miarolitic cavities and enclaves in the Kakkonda granite by X-ray computed tomography. Journal of Structural Geology, 2001, 23(11): 1741–1751
Oda M, Takemura T, Takahashi M. Microstructure in shear band observed by microfocus X-ray computed tomography. Geotechnique, 2004, 54(8): 539–542
Fonseca J, O’Sullivan C, Coop M R, Lee P D. Quantifying the evolution ofsoil fabric during shearing using directional parameters. Geotechnique, 2013, 63(6): 487–499
Fonseca J, O’Sullivan C, Coop M R, Lee P D. Quantifying the evolution of soil fabric during shearing using scalar parameters. Geotechnique, 2013, 63(10): 818–829
Desrues J, Chambon R, Mokni M, Mazerolle F. Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography. Geotechnique, 1996, 46(3): 529–546
Lenoir N, Bornert M, Desrues J, Bésuelle P, Viggiani G. Volumetric digital image correlation applied to X-ray micro tomography images from triaxial compression tests on argillaceous rock. Strain, 2007, 43(3): 193–205
Watanabe Y, Lenoir N, Otani J, Nakai T. Displacement in sand under triaxial compression by tracking soil particles on X-ray CT data. Soils and foundations, 2012, 52(2): 312–320
Matsushima T, Katagiri J, Uesugi K, Nakano T, Tsuchiyama A. Micro X-ray CT at Spring-8 for granular mechanics. In: Soil Stress-Strain Behavior: Measurement, Modeling and Analysis: A Collection of Papers of the Geotechnical Symposium in Rome. 2006, 146: 225–234
Otani J, Mukunoki T, Obara Y. Characterization of failure in sand under triaxial compression using an industrial X-ray CT scanner. International Journal of Physical Modelling in Geotechnics, 2002, 2(1): 15–22
Hasan A, Alshibli K. Three dimensional fabric evolution of sheared sand. Granular Matter, 2012, 14(4): 469–482
Andò E. Experimental investigation of microstructural changes in deforming granular media using X-ray tomography. Dissertation for the Doctoral Degree. Grenoble: The University of Grenoble, 2013
Higo Y, Oka F, Sato T, Matsushima Y, Kimoto S. Investigation of localized deformation in partially saturated sand under triaxial compression using microfocus X-ray CT with digital image correlation. Soil and Foundation, 2013, 53(2): 181–198
Higo Y, Oka F, Kimoto S, Sanagawa T, Matsushima Y. Study of strain localization and microstructural changes in partially saturated sand during triaxial tests using microfocus X-ray CT. Soils and Foundations, 2011, 51(1): 95–111
Head K H. Manual of Soil Laboratory Testing. London: Pentech Press Ltd., 1982
Indraratna B, Wijewardena L S S, Balasubramaniam A S. Large-scale triaxial testing of greywacke rockfill. Geotechnique, 1993, 43(1): 37–51
Wang J, Gutierrez M. Discrete element simulations of direct shear specimen scale effects. Geotechnique, 2010, 60(5): 395–409
Desrues J, Andò E, Mevoli F A, Debove L, Viggiani G. How does strain localise in standard triaxial tests on sand: Revisiting the mechanism 20 years on. Mechanics Research Communications, 2018, 92: 142–146
Hall S A, Bornert M, Desrues J, Pannier Y, Lenoir N, Viggiani G, Bésuelle P. Discrete and continuum analysis of localised deformation in sand using X-ray CT and volumetric digital image correlation. Geotechnique, 2010, 60(5): 315–322
Andò E, Viggiani G, Hall S A, Desrues J. Experimental micromechanics of granular media studied by X-ray tomography: Recent results and challenges. Géotechnique Letters, 2013, 3(3): 142–146
Vlahinic I, Kawamoto R, Andò E, Viggiani G, Andrade J E. From computed tomography to mechanics of granular materials via level set bridge. Acta Geotechnica, 2017, 12(1): 85–95
Cheng Z, Wang J. Experimental investigation of inter-particle contact evolution of sheared granular materials using X-ray microtomography. Soils and Foundations. 2018, 58(6): 1492–1510
Zhao B D, Wang J F, Coop M R, Viggiani G, Jiang M J. An investigation of single sand particle fracture using X-ray microtomography. Geotechnique, 2015, 65(8): 625–641
Wang W Y, Coop M R. An investigation of breakage behaviour of single sand particles using a high-speed microscope camera. Geotechnique, 2016, 66(12): 984–998
Perona P, Malik J. Scale-space and edge detection using anisotropic diffusion. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1990, 12(7): 629–639
Bernard D, Guillon O, Combaret N, Plougonven E. Constrained sintering of glass films: Microstructure evolution assessed through synchrotron computed microtomography. Acta Materialia, 2011, 59(16): 6228–6238
Al-Raoush R, Alshibli K A. Distribution of local void ratio in porous media systems from 3D X-ray microtomography images. Physica A, 2006, 361(2): 441–456
Cheng Z. Investigation of the grain-scale mechanical behavior of granular soils under shear using X-ray micro-tomography. Dissertation for the Doctoral Degree. Hong Kong, China: City University of Hong Kong, China, 2018
Beucher S, Lantuejoul C. Use ofwatersheds in contour detection. In: Proceedings of the International Workshop on image Processing, Real-Time Edge and Motion Detection/Estimation. Rennes, 1979
Gonzalez R C, Woods R E. Digital Image Processing. Upper Saddle River, NJ: Pearson/Prentice Hall, 2010
Cheng Z, Wang J. A particle-tracking method for experimental investigation of kinematics of sand particles under triaxial compression. Powder Technology, 2018, 328: 436–451
Cheng Z, Wang J. Quantification of the strain field of sands based on X-ray micro-tomography: A comparison between a grid-based method and a mesh-based method. Powder Technology, 2019, 344: 314–334
Acknowledgements
This study was supported by the General Research Fund (No. CityU 11272916) from the Research Grant Council of the Hong Kong SAR, Research from the National Science Foundation of China (Grant No. 51779213), the Open-Research from State Key Laboratory of Civil Engineering Disaster Prevention of Tongji University (No. SLDRCE15-04), and the BL13W beam-line of Shanghai Synchrotron Radiation Facility (SSRF). The authors would like to thank Dr. Edward Andò in Université Grenoble Alpes for providing his PhD thesis.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, Z., Wang, J., Coop, M.R. et al. A miniature triaxial apparatus for investigating the micromechanics of granular soils with in situ X-ray micro-tomography scanning. Front. Struct. Civ. Eng. 14, 357–373 (2020). https://doi.org/10.1007/s11709-019-0599-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-019-0599-2