Abstract
Bayer’s process revolutionized the extraction of aluminum from the bauxite ores. However, the hydrothermal extraction of alumina is associated with the generation of a byproduct, red-mud consisting of undissolved solids composed of iron oxides, sodium alumino silicates, titania, silica and rare earth elements. The accumulation of red-mud (or bauxite residue) in the world is 30 billion metric tons produced at a rate of 125 million tons per annum (2013). Utilization of red-mud for constructional purposes, wastewater treatment, metallurgical products, and pigments are listed. Metallurgical processing efforts of red-mud to generate various value added products such as pig iron, direct reduced iron slag wool, magnetite, titania, iron carbides are presented in the article.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Habbashi F. Textbook of Hydrometallurgy. Métallurgie Extractive Québec, 1999
Edward J, Frary F, Jefferies Z. Aluminum and Its Production. Columbus: McGraw-Hill Book Company, Inc, 1930
Information from Company Websites of USGS. Alcoa. 2017, http://www.alcoa.com/australia/en/sustainability/environmental-management. asp, https://minerals.usgs.gov/minerals/pubs/commodity/bauxite/
Bauxite Residue Management: Best Practice. World aluminum, European aluminum association, April 2013
Burkin A R. Production of Aluminum and Alumina. Society of Chemical Industry. Hoboken: John Wiley and Sons, 1987
Prasad P M, Singh M. Problems in the disposal and utilization of red muds. Banaras Metallurgist, 1997, 14–15: 127–140
Staley A K. An investigation into the Pyrometallurgical and electrometallurgical extraction of iron from red mud generated in the processing of bauxite ores. Dissertation for the Doctoral Degree. Colorado: Colorado School of Mines, 2002
Samal S, Ray A, Bandopadhyay A. Proposal for resources, utilization and processes of red mud in India: A review. International Journal of Mineral Processing, 2013, 118: 43–55
Pontikes Y, Angelpoulos G. Bauxite residue in cement and cementitious applications: Current status and a possible way forward. Resources, Conservation and Recycling, 2013, 73: 53–63
Singh M, Upadhyay S N, Prasad P M. Preparation of iron rich cements using red mud. Cement and Concrete Research, 1997, 27(7): 1037–1046
Mishra C R, Yadav D, Sharma P S, Alli M M. Production of ordinary portland cement (OPC) from NALCO red mud. TMS (The Minerals, Metals and Materials Society). 2011, https://link.springer. com/chapter/10.1007%2F978-3-319-48160-9_17
Liu X, Zhang N. Utilization of red mud in cement production: A review. Waste Management & Research, 2010, 29(10): 1053–1063
Liu Q, Xin R, Li C, Xu C, Yang J. Application of red mud as a basic catalyst for biodiesel production. Journal of Environmental Sciences (China), 2013, 25(4): 823–829
Liang W, Couperthwaite S J, Kaur G, Yan C, Johnstone D W, Millar G J. Effect of strong acids on red mud structural and fluoride adsorption properties. Journal of Colloid and Interface Science, 2014, 423: 158–165
Liu Z, Li H. Metallurgical process for valuable elements recovery from red mud: A review. Hydrometallurgy, 2015, 155: 29–43
Hammond K, Mishra B, Apelian D, Blanpain B. CR3 Communication: Red mud — a resource or a waste? Journal of the Minerals Metals & Materials Society, 2013, 65(3): 340–341
Liu W, Yang J, Xiao B. Review on treatment and utilization of bauxite residues in China. International Journal of Mineral Processing, 2009, 93(3–4): 220–231
Liu W, Sun S, Zhang L, Jahanshahi S, Yang J. Experimental and simulative study on phase transformation in Bayer red mud sodalime roasting system and recovery of Al, Na and Fe. Minerals Engineering, 2012, 39: 213–218
Zhong L, Zhang Y, Yi Z. Extraction of alumina and sodium oxide from red mud by a mild hydro-chemical process. Journal of Hazardous Materials, 2009, 172(2–3): 1629–1634
Li H, Hui J, Wang C, Bao W, Sun Z. Removal of sodium (Na2O) from alumina extracted fly ash by a mild hydrothermal process. Hydrometallurgy, 2015, 153: 1–5
Vachon P, Tyagi R D, Auclair J C, Wilkinson K J. Chemical and biological leaching of aluminum from red mud. Environmental Science & Technology, 1994, 28(1): 26–30
Bruckard WJ, Calle C M, Davidson R H, Glenn A M, Jahanshahi S, Somerville MA, Sparrow G J, Zhang L. Smelting of bauxite residue to form a soluble sodium aluminum silicate phase to recover alumina and soda. Mineral Processing and Extractive Metallurgy Review, 2010, 119(1): 18–26
Li X, Xiao W, Liu W, Liu G, Peng Z, Zhou Q, Qi T. Recovery of alumina and ferric oxide from Bayer red mud rich in iron by reduction sintering. Transactions of Nonferrous Metallurgical Society, 2009, 19(5): 1342–1347
Zhou Q S, Fan K S, Li X B, Peng Z H, Liu G H. Alumina recovery from red mud with high iron by sintering process. Journal of Central South University Science and Technology, 2008, 39(1): 92–97 (in Chinese)
Raspopov N V, Korneev V P, Averin V, Lainer Y A, Zinoneev D V, Dyubanov V G. Reduction of iron oxides during the Pyrometallurgical processing or red mud. Russian Metallurgy (Metally), 2013, 1(1): 33–37
Li G, Liu M, Rao M, Jiang T, Zhuang J, Zhang Y. Stepwise extraction of valuable components from red mud based on reductive roasting with sodium salts. Journal of Hazardous Materials, 2014, 280: 774–780
Jamieson E, Jones A, Cooling D, Stockton N. Magnetic separation of red sand to produce value. Minerals Engineering, 2006, 19(15): 1603–1605
Zhu D, Jun T, Chun J, Zhen P. Recovery of iron from high-iron red mud by reduction roasting with adding sodium salt. Journal of Iron and Steel Research International, 2012, 19(8): 1–5
Liu W, Yang J, Xiao B. Application of Bayer red mud for iron recovery and building material production from aluminosilicate residues. Journal of Hazardous Materials, 2009, 161(1): 474–478
Piga L, Pochetti F, Stoppa L. Recovery of metals from red mud generated during alumina production. JOM, 1993, 45(11): 54–59
Stickney WA, Butler MO, Mauser J E, Fursman O C. Utilization of red mud residues from alumina production. Washington: U.S. Department of Interior, Bureau of Mines, DC, 1970
Kumar R, Srivastava J P. Premchand. Utilization of iron values of red mud for metallurgical applications. Environmental and Waste Management, 1998, 108–119
Jayasankar K, Ray P K, Chaubey A K, Padhi A, Satapathy B K, Mukherjee P S. Production of pig iron from red mud waste fines usingthermal plasma technology. InternationalJournal of Minerals Metallurgy and Materials, 2012, 19(8): 679–684
Laguna C, González F, García-Balboa C, Ballester A, Blázquez M L, Muñoz J A. Bioreduction of iron compoundsas a possible clean environmental alternative for metal recovery. Minerals Engineering, 2011, 24(1): 10–18
Zhong L, Zhang Y, Zhang Y. Extraction of alumina and sodium oxidefrom red mud by a mild hydro-chemical process. Journal of Hazardous Materials, 2009, 172(2–3): 1629–1634
Guo Y, Guo J, Xu H, Zhao K, Shi X. Nuggests production by direct reductionof high iron red mud. Journal of Iron andSteel research, International, 2013, 20(5): 24–27
Samouhos M, Taxiarchou M, Tsakiridis P, Potiriadis K. Greek red mud residue: A study of microwave reductive roasting followed by magnetic separation for a metallic iron recovery process. Journal of Hazardous Materials, 2013, 254–255: 193–205
Li G, Liu M, Rao M, Jiang T, Zhuang J, Zhang Y. Stepwise extraction of valuable components from red mud based on reductive roasting with sodium salts. Journal of Hazardous Materials, 2014, 280: 774–780
Teplov O A, Lainer Y U. Rate of reduction of the iron oxides in red mud by hydrogen and converted gas. Russian Metallurgy (Metally), 2013, 1: 32–40
Caupain R. Low-temperature gas-phase carbidization of ironbearing constituents in red mud. Dissertation for the Master Degree. Colorado: Colorado School of Mines, 2004
Strausta K H. DD Patent, 120185-A, 1976-06-05
Vereinigte A W. FR Patent, 2.117.930-A, 1971-12-07
Wang J, Zhao P. Method of dealkalizing red mud and recovering aluminum and iron. Google patents, 2013
Agatzini-Leonardou S, Oustadakis P, Tsakiridis P E, Markopoulos C. Titanium leaching from red mud by diluted sulfuric acid at atmospheric pressure. Journal of Hazardous Materials, 2008, 157(2-3): 579–586
Erçag E, Apak R. Furnace smelting and extractive metallurgy of red mud: Recovery of TiO2, Al2O3 and pig iron. Journal of Chemical Technology and Biotechnology (Oxford, Oxfordshire), 1997, 70(3): 241–246
Mehta S, Patel S. Recovery of titania from the bauxite sludge. Journal of the American Chemical Society, 1951, 73(1): 226–227
Xiang Q, Liang X, Schlesinger M, Watson J. Low-temperature reduction of ferric iron in red mud. TMS (The Minerals, Metals and Materials Society). 2001, http://scholarsmine.mst.edu/matsci_eng_-facwork/582/
Liu Y, Zhao B, Tang Y, Wan P, Chen Y, Lv Z. Recycling of iron from red mud by magnetic separation after co-roasting with pyrite. Thermochimica Acta, 2014, 588: 11–15
Binnemans K, Jones P T, Blanpain B, Gerven T P, Pontikes Y. Towards zero waste valorization of rare earth-containing-industrial process residues: A critical review. Journal of Cleaner Production, 2015, 99: 17–38
Wagh A S, Pinnock W R. Occurrence of scandium and rare earth elements in Jamaican Bauxite waste. Economic Geology and the Bulletin of the Society of Economic Geologists, 1987, 82(3): 757–761
Borra C R, Pontikes Y, Binnemans K, Gerven T V. Leaching of rare earths from bauxite residue (red mud). Minerals Engineering, 2015, 76: 20–27
Wang W, Cheng C Y. Separation and purification of scandium by solvent extraction and related technologies: A review. Journal of Chemistry and Biotechnology, 2011, 86(10): 1237–1246
Yatsenko S P, Pyagai I N. Red mud pulp carbonization with scandium extraction during alumina production. Theoretical Foundations of Chemical Engineering, 2010, 44(4): 563–568
Author information
Authors and Affiliations
Corresponding author
Additional information
Dr. Brajendra Mishra is the Kenneth G. Merriam Distinguished Professor of Mechanical Engineering and Director of the Metal Processing Institute at the Worcester Polytechnic Institute [WPI]. Dr. Mishra is the Director of the National Science Foundation’s Industry/University Collaborative Research Center on Resource Recovery & Recycling. Brajendra received his Bachelor of Technology degree in Metallurgical Engineering from the Indian Institute of Technology in Kharagpur, India and his M.S. and Ph.D. in Materials Science from the University of Minnesota in Minneapolis. Prior to joining WPI, Mishra was a Professor of Corrosion and Physico-chemical Processing in Metallurgical & Materials Engineering at the Colorado School of Mines [CSM] where he now serves as a University Emeritus Professor. Dr. Mishra has over twenty seven years of research experience in materials recovery and recycling, molten salt pyrometallurgy and electrochemistry and has many contributions to the application of these technologies to materials development and processing. Dr. Mishra has authored over 500 technical publications in refereed journals and conference proceedings. He holds nine patents and has authored/edited 19 books. Dr. Mishra is a member of TMS, ASM International, and NACE. He is a Fellow of ASM (2001) and TMS (2016). Mishra received the Distinguished Service Award from the Minerals Metals & Materials Society (2010) and the highest award of Honorary Membership form the Indian Institute of Metals (2008). Brajendra served as the 2006 President of The Mineral, Metals & Materials Society (TMS) of AIME and the 2011 President of Amer. Institute of Mining, Metallurgical & Petroleum Engineers. Dr. Mishra received the Presidential Citation of AIME in 2015 and the Kenneth Andrew Roe Award from AAES (2016).
Rights and permissions
About this article
Cite this article
Mishra, B., Gostu, S. Materials sustainability for environment: Red-mud treatment. Front. Chem. Sci. Eng. 11, 483–496 (2017). https://doi.org/10.1007/s11705-017-1653-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11705-017-1653-z