Abstract
We have synthesized undoped, Co-doped (up to 5%), and Se-doped (up to 4%) FeS2 materials by mechanical alloying in a planetary ball mill and investigated their thermoelectric properties from room temperature (RT) to 600 K. With decreasing particle size, the undoped FeS2 samples showed higher electrical conductivity, from 0.02 S cm−1 for particles with 70 nm grain size up to 3.1 S cm−1 for the sample with grain size of 16 nm. The Seebeck coefficient of the undoped samples showed a decrease with further grinding, from 128 μV K−1 at RT for the sample with 70-nm grains down to 101 μV K−1 for the sample with grain size of 16 nm. The thermal conductivity of the 16-nm undoped sample lay within the range from 1.3 W m−1 K−1 at RT to a minimal value of 1.2 W m−1 K−1 at 600 K. All doped samples showed improved thermoelectric behavior at 600 K compared with the undoped sample with 16 nm particle size. Cobalt doping modified the p-type semiconducting behavior to n-type and increased the thermal conductivity (2.1 W m−1 K−1) but improved the electrical conductivity (41 S cm−1) and Seebeck coefficient (-129 μV K−1). Isovalent selenium doping led to a slightly higher thermal conductivity (1.7 W m−1 K−1) as well as to an improved electrical conductivity (26 S cm−1) and Seebeck coefficient (110 μV K−1). The ZT value of FeS2 was increased by a factor of five by Co doping and by a factor of three by Se doping.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G. Homm and P.J. Klar, Phys. Status Solidi Rapid Res. Lett. 5, 324 (2011).
J. Puthussery, S. Seefeld, N. Berry, M. Gibbs, and M. Law, J. Am. Chem. Soc. 133, 716 (2011).
A. Ennaoui, S. Fiechter, C. Pettenkofer, N. Alonso-Vante, K. Büker, M. Bronold, C. Höpfner, and H. Tributsch, Sol. Energy Mater. Sol. Cells 29, 289 (1993).
E. Strauss, D. Golodnitsky, and E. Peled, Electrochim. Acta 45, 1519 (2000).
T. Harada, J. Phys. Soc. Jpn. 67, 1352 (1998).
K. Kato, Y. Okamoto, J. Morimoto, and T. Miyakawa, J. Mater. Sci. Lett. 16, 914 (1997).
S.-C. Hsiao, C.-M. Hsu, S.-Y. Chen, Y.-H. Perng, Y.-L. Chueh, L.-J. Chen, and L.-H. Chou, Mater. Lett. 75, 152 (2012).
W. Li, M. Döblinger, A. Vaneski, A.L. Rogach, F. Jäckel, and J. Feldmann, J. Mater. Chem. 21, 17946 (2011).
L. Hicks and M. Dresselhaus, Phys. Rev. B 47, 12727 (1993).
D. Lichtenberger, K. Ellmer, R. Schieck, and S. Fiechter, Appl. Surf. Sci. 71, 583 (1993).
S. Nakamura and A. Yamamoto, Sol. Energy Mater. Sol. Cells 65, 79 (2001).
G. Willeke, O. Blenk, C. Kloc, and E. Bucher, J. Alloys Compd. 178, 181 (1992).
S. Butler and R. Bouchard, J. Cryst. Growth 10, 163 (1971).
H. Duan, Y. Zheng, and Y. Dong, Mater. Res. Bull. 39, 1861 (2004).
S. Kar and S. Chaudhuri, Chem. Phys. Lett. 398, 22 (2004).
E.J. Kim and B. Batchelor, Mater. Res. Bull. 44, 1553 (2009).
D.V. Talapin, J.-S. Lee, M.V. Kovalenko, and E.V. Shevchenko, Chem. Rev. 110, 389 (2010).
Y. Bai, J. Yeom, M. Yang, S. Cha, K. Sun, and N.A. Kotov, J. Phys. Chem. C 117, 2567 (2013).
S.W. Lehner, K.S. Savage, and J.C. Ayers, J. Cryst. Growth 286, 306 (2006).
S. Guo, D.P. Young, R.T. Macaluso, D.A. Browne, N.L. Henderson, J.Y. Chan, L.L. Henry, and J.F. DiTusa, Phys. Rev. B 81, 1 (2010).
S. Guo, D. Young, R. Macaluso, D. Browne, N. Henderson, J. Chan, L. Henry, and J. DiTusa, Phys. Rev. Lett. 100, 017209 (2008).
B. Thomas, K. Ellmer, W. Bohne, J. Röhrich, M. Kunst, and H. Tributsch, Solid State Commun. 111, 235 (1999).
P. Díaz-Chao, I.J. Ferrer, and C. Sánchez, Thin Solid Films 516, 7116 (2008).
R.J. Bouchard, Mater. Res. Bull 3, 563 (1968).
J. Zhu, W. Zuo, S. Liang, and B. Zheng, Appl. Geochem. 19, 461 (2004).
A. Diener and R. Köppe, J. Cryst. Growth 349, 55 (2012).
P.P. Chin, J. Ding, J.B. Yi, and B.H. Liu, J. Alloys Compd. 390, 255 (2005).
J. Jiang, R. Larsen, R. Lin, S. Mørup, I. Chorkendorff, K. Nielsen, K. Hansen, and K. West, J. Solid State Chem. 138, 114 (1998).
P. Abraitis, Int. J. Miner. Process. 74, 41 (2004).
Y.N. Zhang, J. Hu, M. Law, and R.Q. Wu, Phys. Rev. B 85, 085314 (2012).
D. Alfonso, J. Phys. Chem. C 114, 8971 (2010).
A. Krishnamoorthy, F.W. Herbert, S. Yip, K.J. Van Vliet, and B. Yildiz, J. Phys. 25, 045004 (2013).
X. Zhang, M. Manno, A. Baruth, M. Johnson, E.S. Aydil, and C. Leighton, ACS Nano. 7, 2781 (2013).
M. Cabán-Acevedo, D. Liang, K.S. Chew, J.P. Degrave, N. S. Kaiser, and S. Jin, ACS Nano. 7, 1731 (2013).
J.R. Ares, A. Pascual, I.J. Ferrer, and C.R. Sánchez, Thin Solid Films 451–452, 233 (2004).
J. Oertel, K. Ellmer, W. Bohne, J. Röhrich, and H. Tributsch, J. Cryst. Growth 198–199, 1205 (1999).
P.A. Popov, P.P. Fedorov, and S.V. Kuznetsov, Crystallogr. Rep. 58, 319 (2013).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Uhlig, C., Guenes, E., Schulze, A.S. et al. Nanoscale FeS2 (Pyrite) as a Sustainable Thermoelectric Material. J. Electron. Mater. 43, 2362–2370 (2014). https://doi.org/10.1007/s11664-014-3065-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-014-3065-x