Abstract
We have conducted a theoretical study of the equilibrium strain and misfit dislocation density profiles for “S-graded” buffer layers of In x Ga1−x As on GaAs (001) substrates in which the compositional profile follows a normal cumulative distribution function. On the basis of this modeling work we show that the S-graded layer exhibits misfit dislocation-free regions near the substrate interface and the free surface (or device interface). The equilibrium peak misfit dislocation density as well as the thicknesses of the dislocation-free regions may be tailored by design of the compositional profile; this in turn should enable minimization of the density of electronically active threading dislocations at the top surface. S-graded buffer layers may therefore facilitate the achievement of metamorphic device structures with improved performance compared with similar structures having uniform or linearly graded buffers.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Tersoff, J. Appl. Phys. Lett. 62, 693 (1993).
J. Tersoff, Appl. Phys. Lett. 64, 2748 (1994).
E.A. Fitzgerald, Y.-H. Xie, D. Monroe, P.J. Silverman, J.M. Kuo, A.R. Kortan, F.A. Thiel, and B.W. Weir, J. Vac. Sci. Technol. B 10, 1807 (1992).
D. Richman and J.J. Tietjen, Trans. AIME 239, 418 (1967).
J.J. Tietjen, J.I. Pankove, I.J. Hegyi, and H. Nelson, Trans. AIME 239, 385 (1968).
C.J. Nuese, J.J. Tietjen, J.J. Gannon, and H.F. Gossenberger, Trans. AIME 242, 400 (1968).
M.S. Abrahams, L.R. Weisberg, C.J. Buiocchi, and J. Blanc, J. Mater. Sci. 4, 223 (1969).
R.M. Biefeld, C.R. Hills, and S.R. Lee, J. Cryst. Growth 91, 515 (1988).
F.K. LeGoues, B.S. Meyerson, and J.F. Morar, Phys. Rev. Lett. 66, 2903 (1991).
K.L. Kavanagh, J.C. Chang, J. Chen, J.M. Fernandez, and H.H. Wieder, J. Vac. Sci. Technol. B 10, 1820 (1992).
F. Schaffler, D. Tobben, H.-J. Herzog, G. Abstreiter, and B. Hollander, Semicond. Sci. Technol. 7, 260 (1992).
A. Sacedon, F. Gonzalez-Sanz, E. Calleja, E. Munoz, S.I. Molina, F.J. Pacheco, D. Araujo, R. Garcia, M. Lourenco, Z. Yang, P. Kidd, and D. Dunstan, Appl. Phys. Lett. 66, 3334 (1995).
A. Bosacchi, A.C. De Riccardis, P. Frigeri, S. Franchi, C. Ferrari, S. Gennari, L. Lazzarini, L. Nasi, G. Salviati, A.V. Drigo, and F. Romanato, J. Cryst. Growth 175/176, 1009 (1997).
H. Choi, Y. Jeong, J. Cho, and M.H. Jeon, J. Cryst. Growth 311, 1091 (2009).
D. Sidoti, S. Xhurxhi, T. Kujofsa, S. Cheruku, J.P. Correa, B. Bertoli, P.B. Rago, E.N. Suarez, F.C. Jain, and J.E. Ayers, J. Appl. Phys. in press (2011).
B. Bertoli, E.N. Suarez, J.E. Ayers, and F.C. Jain, J. Appl. Phys. 106, 073519 (2009).
D. Sidoti, S. Xhurxhi, T. Kujofsa, S. Cheruku, J. Reed, B. Bertoli, P.B. Rago, E.N. Suarez, F.C. Jain, and J.E. Ayers, J. Electron. Mater. 39, 1140 (2010).
Y. Song, S. Wang, I. Tangring, Z. Lai, and M. Sadeghi, J. Appl. Phys. 106, 123531 (2009).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xhurxhi, S., Obst, F., Sidoti, D. et al. S-Graded Buffer Layers for Lattice-Mismatched Heteroepitaxial Devices. J. Electron. Mater. 40, 2348–2354 (2011). https://doi.org/10.1007/s11664-011-1781-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-011-1781-z