In this study we consider the effect of separately adding 0.5 wt.% to 1.5 wt.% Zn or 0.5 wt.% to 2 wt.% Al to the eutectic Sn-3.5Ag lead-free solder alloy to limit intermetallic compound (IMC) growth between a limited volume of solder and the contact metallization. The resultant solder joint microstructure after reflow and high-temperature storage at 150°C for up to 1000 h was investigated. Experimental results confirmed that the addition of 1.0 wt.% to 1.5 wt.% Zn leads to the formation of Cu-Zn on the Cu substrate, followed by massive spalling of the Cu-Zn IMC from the Cu substrate. Growth of the Cu6Sn5 IMC layer is significantly suppressed. The addition of 0.5 wt.% Zn does not result in the formation of a Cu-Zn layer. On Ni substrates, the Zn segregates to the Ni3Sn4 IMC layer and suppresses its growth. The addition of Al to Sn-3.5Ag solder results in the formation of Al-Cu IMC particles in the solder matrix when reflowed on the Cu substrate, while on Ni substrates Al-Ni IMCs spall into the solder matrix. The formation of a continuous barrier layer in the presence of Al and Zn, as reported when using solder baths, is not observed because of the limited solder volumes used, which are more typical of reflow soldering.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Glazer, Int. Mater. Rev. 40, 65 (1995).
M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).
K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002).
K.N. Tu, A.M. Gusak, and M. Li, Appl. Phys. Rev. 93, 1335 (2003).
K.N. Tu, Solder Joint Technology: Materials, Properties, and Reliability. Springer, New York, USA (2007).
H.F. Zou, H.J. Yang, and Z.F. Zhang, Acta Mater. 56, 2649 (2008).
J.F. Li, S.H. Mannan, M.P. Clode, D.C. Whalley, and D.A. Hutt, Acta Mater. 54, 2907 (2006).
J.F. Li, S.H. Mannan, M.P. Clode, D.C. Whalley, and D.A. Hutt, Acta Mater. 55, 737 (2007).
F. Wang, X. Ma, and Y. Qian, Scripta Mater. 53, 699 (2005).
Y.K. Jee, Y.H. Ko, and J. Yu, J. Mater. Res. 22, 1879 (2007).
Y.K. Jee, Y.H. Xia, J. Yu, H.W. Kang, and T.Y. Lee, IEEE 58th Electronic Components and Technology Conference (Florida, May 2008), pp. 491–494.
Y.H. Xia, Y.K. Jee, J. Yu, and T.Y. Lee, J. Mater. Res. 37, 1858 (2008).
S.K. Kang, D.Y. Shih, D. Leonard, D.W. Henderson, T. Gosselin, and S. Cho, JOM 56, 34 (2004).
M. Lu, D.Y. Shih, S.K. Kang, C. Goldsmith, and P. Flaitzb, J. Appl. Phys. 106, 053509 (2009).
H.R. Kotadia, O. Mokhtari, M. Bottrill, M.P. Clode, M.A. Green, and S.H. Mannan, 2010 International Symposium on Advanced Packaging Materials: Microtech Conference (Cambridge, March 2010), pp. 17–21.
C.M.L. Wua, D.Q. Yua, C.M.T. Lawa, and L. Wangb, Mater. Sci. Eng. R 44, 1 (2004).
A. Fawzy, Mater. Character. 58, 323 (2007).
M. McCormack and S. Jin, JOM 45, 36 (1993).
C.Y. Yu, K.J. Wang, and J.G. Duh, J. Electron. Mater. 39, 230 (2010).
http://gow.epsrc.ac.uk/ViewGrant.aspx?GrantRef=EP/G054339/1.
S.C. Yang, C.E. Ho, C.W. Chang, and C.R. Kao, J. Appl. Phys. 101, 084911 (2007).
C. Chou and S. Chen, Acta Mater. 54, 2393 (2006).
J.M. Koo, B.Q. Vu, Y.N. Kim, J.B. Lee, J.W. Kim, D.U. Kim, J.H. Moon, and S.B. Jung, J. Electron. Mater. 37, 118 (2007).
X. Wang, Y.C. Liu, and Z.M. Gao, J. Mater. Sci.: Mater Electron. (2010). doi:10.1007/s10854-010-0075-1.
J.W. Ronnie Teo and Y.F. Sun, Acta Mater. 56, 242 (2008).
D. Yao and J.K. Shang, IEEE Trans. CPMT B 19, 154 (1996).
M.G. Cho, S.K. Kang, D.Y. Shih, and H.M. Lee, J. Electron. Mater. 36, 1501 (2007).
V.I. Dybkov, Growth Kinetics of Chemical Compound Layers (Cambridge: Cambridge International Science, 1998).
R. Ashayer, A. Cobley, O. Mokhtari, S.H. Mannan, S. Sajjadi, and T. Mason, ESTC, Greenwich, Vol. 1–2 (2008), pp. 929–933, ISBN 978-1-4244-2814-4.
F. Wang, F. Gao, X. Ma, and Y. Qian, J. Electron. Mater. 35, 1818 (2006).
W.F. Feng, C.Q. Wang, and M. Morinaga, J. Electron. Mater. 31, 185 (2002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kotadia, H.R., Mokhtari, O., Bottrill, M. et al. Reactions of Sn-3.5Ag-Based Solders Containing Zn and Al Additions on Cu and Ni(P) Substrates. J. Electron. Mater. 39, 2720–2731 (2010). https://doi.org/10.1007/s11664-010-1382-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-010-1382-2