Abstract
Chlorination and carbochlorination of tantalum and niobium low-grade concentrate (LGC) and high-grade concentrate (HGC), obtained by leaching of tin slag, were studied using Cl2 + N2 and Cl2 + CO + N2 gas mixtures. Thermogravimetric analysis and conventional boat experiments were performed between 200 °C and 1000 °C. Chemical analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the samples and reaction products. Chlorination of LGC led to the recovery of about 95 pct of tantalum and niobium compounds at 1000 °C. However, the tantalum and niobium chlorinated compounds were contaminated by chlorides of Fe, Mn, etc. For HGC, chlorination at 1000 °C allowed the extraction of about 84 and 65 pct of the niobium and tantalum compounds, respectively. The recovered condensates were composed of pure tantalum and niobium chlorinated compounds. The apparent activation energies E a for the chlorination of LGC and HGC, between 850 °C and 1000 °C, were 166 and 293 kJ/mole, respectively. At temperatures lower than 650 °C, the apparent activation energies for the LGC and HGC carbochlorination were 116 and 103 kJ/mole, respectively. Total extraction of the tantalum and niobium compounds was achieved by the carbochlorination of the LGC at 1000 °C. The generated tantalum and niobium chlorinated compounds were contaminated by the chlorides of Fe, Mn, Al, and Ca. The carbochlorination of the HGC at 500 °C allowed complete extraction and recovery of pure tantalum and niobium compounds. These results confirm the importance of obtaining an HGC from tin slag before its subsequent chlorination. The carbochlorination of such a concentrate could be an efficient process for the recovery of relatively pure tantalum and niobium chlorinated compounds at low temperatures.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
R.J. Tolley: Tantalum-Niobium International Study Center, 40 rue Washington, 1050 Brussels, Belgium, 1992, No. 69, p. 3.
R. Stienning: Proc. Int. Symp. on Tantalum and Niobium, Orlando, Florida, USA, published by T.I.C., 40 rue Washington, 1050 Brussels, Belgium, 1988, pp. 725–45.
L.C. Cunningham: Mineral Commodity Summaries, United States Department of the Interior, Bureau of Mines, Washington, DC, 1991, pp. 44–45.
F.W. Clarke: Bull. Phil. Soc., 1889, vol. 11, p. 131.
Anonymous: L’usine Nouvelle, 1996, No. 2545, p. 109.
A. Murciego: Ph.D. Thesis, University of Salamanca, Salamanca, Spain, 1990.
G.L. Miller: Metallurgy of the Rarer Metals, H.M. Finniston, ed., LBS, London, 1959, pp. 71–75.
W.W. Albrecht and W. Rockenbauer: Proc. Int. Conf. on Tantalum and Niobium, Orlando, Florida, USA, published by T.I.C., 40 rue Washington, 1050 Brussels, Belgium, 1988, pp. 219–40.
W.W. Albrecht, W. Bludssus, J. Eckert, W. Rockenbauer, and H.C. Stark: Tantalum-Niobium International Study Center, 40 rue Washington, 1050 Brussels, Belgium, 1990, No. 64, pp. 5–9.
I. Gaballah and E. Allain: Metall. Trans. B, 1992, vol. 23B, pp. 249–59.
F.E. Block: Paper presented at Int. Conf., Achema, Frankfurt, Germany, 1958.
D.H. Lee: J. Kor. Inst. Mineral Mining Eng., 1982, vol. 19, pp. 209–14.
S.L. May and G.T. Engel: U.S. Bureau of Mines, Cochrans Mill Road, P.O. Box 18070, Pittsburgh, PA, 15236-0070, 1958, R.I. No. 6635.
F.J. Moura, E. de A. Brocchi, and H.M. Kolher: Pyrometallurgy 87 Symp., N. Warner, ed., IMM, London, 1987, pp. 799–812.
E. de A. Brocchi: Ph.D. Thesis, Imperial College of Science and Technology, University of London, London, 1983.
E. de A. Brocchi and J.H.E. Jeffes: Conf. of Mineral Processing Metallurgy, M.J. Jones and P. Gill, eds., IMM, London, 1984, pp. 161–70.
E. Allain, I. Gaballah, and M.-Ch. Meyer: Final Report of “Convention 500 du Plan Métaux,” INPL, Nancy, France, 1987.
E. Allain: Ph.D. Thesis, University of Nancy I, Nancy, France, 1993.
A. Roine: Outokumpu HSC Chemistry for Windows, version 2.0, Outokumpu Research, Pori, Finland, May 1994.
I. Gaballah, E. Allain, and M.C. Meyer: Proc. Int. Symp. on Refractory Metals, K. Nona, C. Lidell, D.R. Sadoway, and R.G. Bautista, eds., TMS, New Orleans, LA, 1990, pp. 283–96.
I. Gaballah, E. Allain, M.C. Meyer, and K. Malau: Metall. Mater. Trans. B, 1994, vol. 25B, pp. 193–205.
J. Szekely, J.W. Evans, and H.Y. Sohn: Gas-Solid Reactions, Academic Press, New York, NY, 1976, pp. 68–70, 73–88, 109–31, and 232–35.
L.R. De Freitas and F. Ajersch: Can. Metall. J., 1986, vol. 25 (3), pp. 219–24.
H.A. Øye and D.M. Gruen: J. Am. Chem. Soc., 1969, vol. 91 (9), pp. 2229–36.
I. Gaballah and N. Kanari: Proc. 7th Nat. Conf. on Metallurgical Science and Technology, Madrid, Spain, 1990, pp. 377–86.
M.K. Soleiman and I.K. Rao: Metall. Trans. B, 1987, vol. 18B, pp. 459–70.
A. Landsberg, C.L. Hoatson, and F.E. Block: Metall. Trans. B, 1972, vol. 3B, pp. 517–23.
I. Gaballah, M. Djona, and E. Allain: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 711–18.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gaballah, I., Allain, E. & Djona, M. Extraction of tantalum and niobium from tin slags by chlorination and carbochlorination. Metall Mater Trans B 28, 359–369 (1997). https://doi.org/10.1007/s11663-997-0102-7
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-997-0102-7