Abstract
Measurements of the rate of interfacial reaction between CO2-CO mixtures and CaO-SiO2-FeOx slags have been made using the 13CO2-CO isotope exchange technique. Ranges of slag compositions from 0 to 100 wt pct ‘FeO’ and CaO/SiO2 between 0.3 and 2.0 were examined in the experiments. For each slag, the dependence of the apparent rate constant on temperature and equilibrium oxygen potential was studied. The relationship between the rate constant and oxygen potential was found to be in the form k a=k oa (ao)-α. The parameter a, with values between 0.5 and 0.9, was dependent on the slag composition. The activation energy of the reaction was independent of iron oxide content and dependent on slag basicity.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H.H. Rodriguez, A.N. Conejo, and R.D. Morales: Steel Res., 2001, vol. 72, pp. 298–303.
M. Ozawa, S. Kitagawa, S. Nakayama, and Y. Takesono: Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 621–28.
M. Mltagh: Iron and Steelmaker, 1991, vol. 18 (10), pp. 56–57.
R. Campos and L. Torres: Proc. Paul E. Qeneau Int. Symp. on Extractive Metallurgy of Copper, Nickel and Cobalt, vol. II. Copper and Nickel Smelter Operation, C.A. Landolt, ed., TMS, Warrendale, PA, 1993, pp. 1441–60.
J.O. Achurra, C.H. Queirolo, and J.G. Achurra: in Copper 87, vol. 4, Pyrometallurgy of Copper, C. Diaz, C. Landolt, and A. Luraschi, eds., University of Chile, Santiago, Chile, 1987, p. 393.
M. Sugata, T. Sugiyama, and S. Kondo: Trans. Iron Steel Inst. Jpn., 1974, vol. 14, pp. 88–95.
M. Sheikhshahab Bafghi, M. Fukuda, Y. Ito, S. Yamada, and M. Sano: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 1125–30.
M.W. Davies, G.S.F. Hazeldean, and P.N. Smith: Physical Chemistry of Process Metallurgy, The Richardson Conf., The Institute of Mining and Metallurgy, London, 1973, pp. 95–107.
T. Gore and G.S.F. Hazeldean: Ironmaking and Steelmaking, 1981, vol. 8, pp. 169–81.
E.W. Mulholland, G.S.F. Hazeldean, and M.W. Davies: J. Iron Steel Inst., 1973, vol. 211, pp. 632–39.
S. Hara and K. Ogino: Testu-to-Hagané, 1990, vol. 76, pp. 360–67.
G.G. Krishna Murthy, A. Hasham, and U.D. Pal: Ironmaking and Steelmaking, 1993, vol. 20, pp. 191–200.
D.J. Min and R.J. Fruehan: Metall. Trans. B, 1992, vol. 23B, pp. 29–37.
B. Sarma, A.W. Cramb, and R.J. Fruehan: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 717–31.
N. Siddiqi, B. Bhoi, R.K. Paramguru, V. Sahajwalla, and O. Ostrovski: Ironmaking and Steelmaking, 2000, vol. 27, pp. 367–72.
R.J. Fruehan: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 743–53.
D.J. Min, J.W. Han, and W.S. Chung: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 215–21.
R.D. Morales, R. Lule, F. Lopez, J. Camacho, and J.A. Romero: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 1054–62.
F. Fun: Metall. Trans., 1970, vol. 1, pp. 2537–41.
G.S. Ershov and E.A. Popova: Chem. Abstr., 1964, vol. 60, p. 4166d.
A.K. Jouhari, R.K. Galgali, P. Chattopadhyay, R.C. Gupta, and H.S. Ray: Scand. J. Metall., 2001, vol. 30, pp. 14–20.
M. Sheikhshab Bafghi, H. Kurimoto, and M. Sano: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 1084–90.
M. Sheikhshab Bafghi, Y. Ito, S. Yamada, and M. Sano: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 1280–86.
S.R. Story, B. Sarma, R.J. Fruehan, A.W. Cramb, and G.R. Belton: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 929–32.
M.P. Shalimov, V.N. Boroneshkov, and S.A. Lyamkin: Russ. Metall., 1980, vol. 3, pp. 31–34.
F. Ji, M. Barati, K. Coley, and G.A. Irons: Proc. VII Int. Conf. on Molten Slags, Fluxes and Salts, Cape Town, SA, Jan. 25–28, 2004, pp. 399–407.
R.K. Paramguru, R.K. Galgali, and H.S. Ray: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 805–10.
E.T. Turkdogan and J. Vinters: Carbon, 1970, vol. 8, pp. 39–53.
E.T. Turkdogan, V. Koump, J. Vinters, and T. F. Perzak: Carbon, 1968, vol. 6, pp. 467–84.
E.T. Turkdogan and J. Vinters: Carbon, 1969, vol. 7, pp. 101–17.
E.T. Turkdogan: Fundamentals of Steelmaking, The University Press, Cambridge, United Kingdom, 1996, pp. 51–57.
S.R. Story and R.J. Fruehan: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 43–54.
T. Nagasaka, M. Hino, and S. Ban-ya: Metall. Trans. B, 2000, vol. 31B, pp. 945–55.
S. Jahanshahi and S. Sun: Metall. Trans. B, 2000, vol. 31B, pp. 937–43.
G.R. Belton: Proc. Centenary Conf., University of Strathclyde, Glasgow, Scotland, Dept. of Metallurgy, June 1984, pp. H1–H8.
S.K. EL-Rahaiby, Y. Sasaki., D.R. Gaskell, and G.R. Belton: Metall. Trans. B, 1986, vol. 17B, pp. 307–16.
T. Nagasaka, Y. Iguchi, and S. Bany-ya: Testu-to-Hagané, 1989, vol. 25, pp. 74–81.
Y. Li and I.P. Ratchev: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 651–60.
M. Mori, K. Morita, and N. Sano: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 624–30.
Y. Sasaki, S. Hara, D.R. Gaskell, and G.R. Belton: Metall. Trans. B, 1984, vol. 15B, pp. 563–71.
S. Sun and G.R. Belton: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 137–45.
S. Sun, Y. Sasaki, and G.R. Belton: Metall. Trans. B, 1988, vol. 19B, pp. 959–65.
H. Matsuura and F. Tsukihashi: Proc. Yazawa Int. Symp., 2003, TMS, San Diego, CA, pp. 107–16.
M. Barati, E. Chen, and K. Coley: Proc. VII Int. Conf. on Molten Slags, Fluxes and Salts, Cape Town, SA, Jan 25–28, 2004, pp. 393–98.
A.W. Cramb, W.R. Graham, and G.R. Belton: Metall. Trans. B, 1978, vol. 9B, pp. 623–29.
A.W. Cramb and G.R. Belton: Metall. Trans. B, 1981, vol. 12B, pp. 699–704.
A.W. Cramb and G.R. Belton: Metall. Trans. B, 1984, vol. 15B, pp. 655–61.
S. Sun and G.R. Belton: Metall. Trans. B, 1998, vol. 29B, pp. 296–98.
R.J. Fruehan and S. Antolin: Metall. Trans. B, 1987, vol. 18B, pp. 415–20.
T. Tran, S. Sun, and S. Jahanshahi: Proc. V Int. Conf. Molten Slags, Fluxes and Salts Conf., Sydney, Australia, 1997, pp. 115–23.
Y. Li, I.P. Ratchev, J.A. Lucas, G.M. Evans, and G.R. Belton: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 1049–57.
L.S. Darken and R.W. Gurry: J. Am. Chem. Soc., 1946, vol. 68, pp. 798–816.
S. Hara, T. Araki, and K. Ogino: Proc. Int. Symp. on Metall. Slags and Fluxes, H.A. Fine and D.R. Gaskell, eds., TMS-AIME, Warrendale, PA, 1984, pp. 441–51.
Y. Takeda, S. Nakazawa, and A. Yazawa: Can. Metall. Q., 1980, vol. 19, pp. 297–305.
M. Timuchin and A.E. Morris: Metall. Trans., 1970, vol. 1, pp. 3193–201.
E.J. Michal and R. Schuhmann: Trans. AIME, 1952, July, pp. 723–28.
L. Yang and G.R. Belton: Metall. Trans. B, 1998, vol. 29B, pp. 837–45.
H.J. Grabke and H. Viefhaus: Ber. Bunsenges. Phys. Chem., 1980, vol. 84, pp. 152–59.
M. Kidd and D.R. Gaskell: Metall. Trans. B, 1986, vol. 17B, pp. 771–76.
P.K. Bhattacharyya and D.R. Gaskell: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 139–40.
H.L. Larson and J. Chipman: Trans. AIME, 1953, Sept., pp. 1089–96.
S. Sun: Ph.D. Thesis, University of Newcastle, Newcastle, Australia, 1988.
H.A. Fine, D. Meyer, D. Janke, and H.J. Engell: Ironmaking and Steelmaking, 1985, vol. 12, pp. 157–62.
S. Jahanshahi and S. Wright: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 195–203.
Q. Jiao and N.J. Themelis: Metall. Trans. B, 1988, vol. 19B, pp. 133–40.
K. Narita, T. Onoye, T. Ishii and K. Uemura: Testu-to-Hagané, 1975, vol. 61, pp. 2943–51.
W.M. Mullins: Surf. Sci. Lett., 1992, vol. 262, pp. L144-L146.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Barati, M., Coley, K.S. Kinetics of CO-CO2 reaction with CaO-SiO2-FeOx melts. Metall Mater Trans B 36, 169–178 (2005). https://doi.org/10.1007/s11663-005-0017-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-005-0017-0