Article PDF
Avoid common mistakes on your manuscript.
References
Steel Bar Product Guidelines, ISS, Warrendale, PA, 1994, pp. 7–10.
The Brimacombe Memorial Symp., Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, 2000.
W.C. Leslie: The Physical Metallurgy of Steels, Tech Books, New York, NY, 1981.
G. Krauss: Steels: Heat Treatment and Processing Principles, ASM INTERNATIONAL, Materials Park, OH, 1990.
H.M. Howe: The Metallography of Steel and Cast Iron, McGraw-Hill, New York, NY, 1916, pp. 556–65.
T.F. Majka: Master’s Thesis, Colorado School of Mines, Golden, CO, 2000.
T.F. Majka, D.K. Matlock, G. Krauss, and M.T. Lusk: 42nd MWSP Conf. Proc., ISS, Warrendale, PA, 2000, pp. 75–87.
T.F. Majka, D.K. Matlock, and G. Krauss: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1627–37.
T.F. Brower and M.C. Flemings: Trans. TMS-AIME, 1967, vol. 239, pp. 216–17.
M.C. Flemings: Solidification Processing, McGraw-Hill, Inc., New York, NY, 1974.
R.E. Reed-Hill: Physical Metallurgy Principles, 2nd ed., D. Van Nostrand Company, New York, NY, 1973, pp. 568–608.
M.C. Flemings and G.E. Nereo: Trans. TMS-AIME, 1967, vol. 239, pp. 1449–61.
M. Rappaz, I. Farup, and J.-M Drezet: Proc. Merton C. Flemings Symp., R. Abbaschian, H. Brody, and A. Mortensen, eds., TMS, Warrendale, PA, 2001, pp. 213–28.
E.J. Schultz, J.J. Moore, G. Krauss, D.K. Matlock, R. Frost, and J. Thomas: 34th Mechanical Working and Steel Processing Proc., ISS, Warrendale, PA, 1992, vol. XXX, pp. 309–19.
I.V. Samarasekera: The Brimacombe Memorial Symp., Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, pp. 399–419.
T.Z. Kattamis and P.W. Voorhees: Proc. Merton C. Flemings Symp., R. Abbaschian, H. Brody, and A. Mortensen, eds., TMS, Warrendale, PA, 2001, pp. 119–28.
H.D. Brody and M.C. Flemings: Trans. AIME, 1966, vol. 236, pp. 615–24.
R.M. Fisher, G.R. Speich, L.J. Cuddy, and H. Hu: Proc. Darken Conf. “Physical Chemistry in Metallurgy,” US Steel, Monroeville, PA, 1976, pp. 463–88.
A.W. Cramb: Casting of Near Net Shape Products, TMS, Warrendale, PA, 1988, pp. 673–82.
A. Suzuki, T. Suzuki, Y. Nagaoka, and Y. Iawata: J. Jpn. Inst. Met., 1968, vol. 32, pp. 1301–05.
E. Essadiqi, L.E. Collins, M.T. Shehata, and L.K. Chiang: 2nd Canada-Japan Symp. on Modern Steelmaking and Casting Techniques, J.J. Jonas, J.D. Boyd, and N. Sano, eds., Canadian Institute of Mining, Metallurgy, and Petroleum, Montreal, 1994, pp. 251–64.
T. Emi: The Brimacombe Memorial Symp., Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, 2000, pp. 23–38.
D.J. Hurtuk: Proc. Int. Conf. on Solidification, The Metals Society, London, 1979, pp. 21–29.
F. Fattorini and B. Grifoni: Final Report Contract No. 7210-EB/402 (1.7.1985-30.6.1988). European Commission, 1990.
W.R. Irving and D.V. Barradell: in Process Control in the Steel Industry, G. Carlsson and H. Nordberg, eds., Uddeholm Research, Haggfors, Sweden, 1986, pp. 7–53.
C.V. White, G. Krauss, and D.K. Matlock: Iron Steelmaker, 1998, vol. 25, No. 9, pp. 73–79.
W.C. Leslie: Trans. ISS, 1983, vol. 2, pp. 1–24.
J. Dyck, R.H. Frost, D.K. Matlock, G. Krauss, W.E. Heitmann, and D. Bhattacharya: Mechanical Working and Steel Processing Proceedings, ISS, Warrendale, PA, 1988, pp. 83–94.
J. Black: Master’s Thesis, Colorado School of Mines, Golden, CO, 1998.
J.S. Kirkaldy, J. von Destinon-Forstmann, and R.J. Brigham: Can. Met. Q., 1962, vol. 1, pp. 59–81.
R.G. Ward: J. Iron Steel Inst., 1965, vol. 203, pp. 930–32.
Y. Sawada, R.P. Foley, S.W. Thompson, and G. Krauss: 35th MWSP Conf. Proc., ISS-AIME, Warrendale, PA, 1994, vol. XXXI, pp. 263–86.
L.E. Samuels: Light Microscopy of Carbon Steels, ASM INTERNATIONAL, Materials Park, OH, 1999, pp. 110–24.
P.G. Bastien: J. Iron Steel Inst., 1957, vol. 187, pp. 281–91.
C.F. Jatczak, D.J. Girardi, and E.S. Rowland: Trans. ASM, 1956, vol. 48, pp. 279–303.
E.T. Turkdogan and R.A. Grange: J. Iron Steel Inst., 1970, vol. 20B, pp. 482–94.
J.S. Kirkaldy, R.J. Brigham, H.A. Domian, and R.G. Ward: Can. Metall. Q., 1963, vol. 2, pp. 233–41.
R. Grossterlinden, R. Kawalla, U. Lotter, and H. Pircher: Steel Res., 1992, vol. 63, pp. 331–36.
J.D. Verhoeven: J. Mater. Eng. Performance, 2000, vol. 9, pp. 286–95.
S.W. Thompson and P.R. Howell: Mater. Sci. Technol., 1992, vol. 8, pp. 777–84.
W.S. Owen, M. Cohen, and B.L. Averbach: Welding J. Welding Res. Suppl., 1958, pp. 368s–374s.
R.A. Grange: Metall. Trans., 1971, vol. 2, pp. 417–26.
W.A. Spitzig: Metall. Trans. A, 1983, vol. 14A, pp. 271–82.
B. Sundman, B. Jansson, and J.O. Anderson: CALPHAD (Calculation of Phase Diagrams) A Comprehensive Guide, Elsevier Science, New York, NY, 1985, pp. 153–90.
R.S. Hyde, D.K. Matlock, and G. Krauss: 40th MWSP Conf. Proc., ISS, Warrendale, PA, 1998, pp. 921–28.
G. Krauss: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 861–77.
J. Wadsworth: in Deformation, Processing, and Properties of Structural Materials, E.M. Taleff, C.K. Syn, and D.R. Lesuer, eds., TMS, Warrendale, PA, 2000, pp. 3–24.
Additional information
Dr. George Krauss is currently University Emeritus Professor at the Colorado School of Mines and a metallurgical consultant specializing in steel microstructural systems. He received the B.S. in Metallurgical Engineering from Lehigh University in 1955 and the M.S. and Sc.D. degrees in Metallurgy from the Massachusetts Institute of Technology in 1958 and 1961, respectively, after working at the Superior Tube Compnay as a Development Engineer in 1956. In 1962–63, he was an NSF Postdoctoral Fellow of the Max Planck Institut für Eisenforschung in Düsseldorf, Germany. He served at Lehigh University as Assistant Professor, Associate Professor, and Professor of Metallurgy and Materials Science from 1963 to 1975, and in 1975, joined the faculty of the Colorado School of Mines as the AMAX Foundation Professor in Physical Metallurgy. He was the John Henry Moore Professor of Metallurgical and Materials Engineering at the time of his retirement from the Colorado School of Mines in 1997.
In 1984, Dr. Krauss was a principal in the establishment of the Advanced Steel Processing and Products Research Center, an NSF Industry-University cooperative research center at the Colorado School of Mines, and served as its first Director until 1993. He has authored the book Steels: Heat Treatment and Processing Principles, ASM International, 1990, coauthored the book, Tool Steels, Fifth Edition, ASM International, 1998, and edited or coedited conference volumes on tempering of steel, carburizing, zinc-based coatings on steel, and microalloyed forging steels. He has published over 300 papers and lectured widely in technical conferences, universities, corporations, and ASM International Chapters, including a number of keynote, invited, and honorary lectures. He presented the Edward DeMille Campbell Memorial Lecture of ASM International in 2000.
Dr. Krauss has served as the President of the International Federation of Heat Treatment and Surface Engineering (IFHTSE), 1989–91, and as President of ASM International, 1996–97. He is Fellow of ASM International, TMS, and IFHTSE. He has been awarded the Adolf Martens Medal of the German Society for Heat Treatment and Materials, the Charles S. Barrett Silver Medal of the Rocky Mountain Chapter of ASM, the George Brown Gold Medal of the Colorado School of Mines, and several other professional and teaching awards, including the ASM Albert Easton White Distinguished Teacher Award in 1999. He is an Honorary Member of the Iron and Steel Institute of Japan, a Distinguished Member of ISS, and an Honorary Member of ASM International.
Rights and permissions
About this article
Cite this article
Krauss, G. Solidification, segregation, and banding in carbon and alloy steels. Metall Mater Trans B 34, 781–792 (2003). https://doi.org/10.1007/s11663-003-0084-z
Issue Date:
DOI: https://doi.org/10.1007/s11663-003-0084-z