Abstract
The present article describes a numerical procedure to simulate metal transfer and the model will be used to analyze the transport processes involved in gas metal arc welding (GMAW). Advanced Computational fluid dynamics (CFD) techniques used in this model include a two-step projection method for solving the incompressible fluid flow; a volume of fluid (VOF) method for capturing free surface; and a continuum surface force (CSF) model for calculating surface tension. The electromagnetic force due to the welding current is estimated by assuming several different types of current density distribution on the free surface of the drop. The simulations based on the assumption of Gaussian current density distribution show that the transition from globular to spray transfer mode occurs over a narrow current range and the size of detached drops is nonuniform in this transition zone. The analysis of the calculation results gives a better understanding of this physical procedure. Comparisons between calculated results and experimental results are presented. It is found that the results computed from the Gaussian assumption agree well with those observed in experiments.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J.F. Lancaster: The Physics of Welding, 2nd ed., Pergamon Press, Oxford, 1986.
L.A. Jones, T.W. Eagar, and J.H. Lang: Welding J., 1998, vol. 77, pp. 135s-41s.
A. Lesnewich: Welding J., 1958, vol. 37, pp. 418s-425s.
S.W. Simpson, P. Zhu, and M. Rados: Proc. 42nd Nat. Welding Conf., 1994, vol. 31, pp. 1–8.
J.H. Waszink and L.H.J. Graat: Welding J., 1983, vol. 62, pp. 109s-16s.
J.C. Amson: Br. J. Appl. Phys., 1965, vol. 16, pp. 1169–79.
C.J. Allum: J. Phys. D, 1985, vol. 18, pp. 1431–46.
C.J. Allum: J. Phys. D, 1985, vol. 18, pp. 1447–68.
V.A. Nemchinsky: J. Phys. D, 1994, vol. 27, pp. 1433–42.
T.M. Joo, C.D. Yoo, and T.S. Lee: J. Manu. Sci. Eng., 1996, vol. 118, pp. 623–27.
S.W. Simpsom and P. Zhu: J. Phys. D, 1995, vol. 28, pp. 1594–600.
J. Haidar and J.J. Lowke: J. Phys. D, 1996, vol. 29, pp. 2951–60.
J. Haidar: J. Phys. D, 1998, vol. 31, pp. 1233–44.
H.G. Fan and R. Kovacevic: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 791–801.
S.K. Chio, C.D. Yoo, and Y.S. Kim: Welding J., 1998, vol. 77, pp. 38s-44s.
S.K. Chio, Y.S. Kim, and C.D. Yoo: J. Phys. D, 1999, vol. 32, pp. 326–34.
D.B. Kothe, R.C. Mjolsness, and M.D. Torrey: RIPPLE, Los Alamos National Laboratory, Los Alamos, NM, 1994, LA-12007-MS.
Y. Wang, H.L. Tsai, S.P. Marin, and P.C. Wang: Proc. IMECE ’02, ASME Int. Mechanical Engineering Congr. Exp. NO, LA, Nov. 17–22, 2002.
Y. Wang and H.L. Tsai: Int. J. Heat Mass Transfer, 2001, vol. 44, pp. 2067–80.
Y. Wang and H.L. Tsai: Metall. Mater. Trans. B, 2001, vol. 32, pp. 501–15.
C.W. Hirt and B.D. Nichols: J. Comp. Phys., 1981, vol. 39, pp. 201–25.
J.U. Brackbill, D.B. Kothe, and C. Zemach: J. Comp. Phys., 1992, vol. 100, pp. 335–54.
F.H. Harlow and J.E. Welch: Phys. Fluids, 1965, vol. 8, pp. 2182–90.
Y.S. Kim and T.W. Eagar: Welding J., 1993, vol. 72, pp. 269–78.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, G., Huang, P.G. & Zhang, Y.M. Numerical analysis of metal transfer in gas metal arc welding. Metall Mater Trans B 34, 345–353 (2003). https://doi.org/10.1007/s11663-003-0080-3
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-003-0080-3