Abstract
Microstructures of engineering alloys often contain features at widely different length scales. In this contribution, a digital image processing technique is presented to incorporate the effect of features at higher length scales on the damage evolution and local fracture processes occurring at lower length scales. The method is called M-SLIP: Microstructural Scale Linking by Image Processing. The technique also enables incorporation of the real microstructure at different length scales in the finite element (FE)-based simulations. The practical application of the method is demonstrated via FE analysis on the microstructure of an aluminum cast alloy (A356), where the length scales of micropores and silicon particles differ by two orders of magnitude. The simulation captures the effect of nonuniformly distributed micropores at length scales of 200 to 500 µm on the local stresses and strains around silicon particles that are at the length scales of 3 to 5 µm. The procedure does not involve any simplifying assumptions regarding the microstructural geometry, and therefore, it is useful to model the mechanical response of the real multi-length scale microstructures of metals and alloys.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Jien-Wei Yeh and Wen-Pin Liu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3558–68.
N. Roy, A.M. Samuel, and F.H. Samuel: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 415–29.
A.M. Gokhale, M.D. Dighe, and M. Horstmeyer: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 905–08.
C.H. Caceres and J.R. Griffiths: Acta Mater. 1996, vol. 44, pp. 25–33.
M.D. Dighe and A.M. Gokhale: Scripta Mater., 1997, vol. 37, pp. 1435–40.
M. Oritz: Comp. Mech., 1996, vol. 15, pp. 321–38.
C. Ruggieri, T.L. Panontin, and R.H. Dodds, Jr.: Int. J. Fract., 1996, vol. 82, pp. 67–95.
J. Fish and A. Wagiman: Comp. Mech., 1993, vol. 12, pp. 1–17.
Min Zhou, A. Needleman, and R.J. Clifton: J. Mech. Phy. Solids, 1994, vol. 42, pp. 423–8.
L. Llorca, A. Needleman, and S. Suresh: Acta Metall. Mater., 1991, vol. 39, pp. 2317–35.
Th. Steinkopff and M. Sautter: Comp. Mater. Sci., 1995, vol. 4, pp. 15–22.
M. Dong and S. Schmaunder: Acta Mater., 1996, vol. 44, pp. 2465–78.
P.M. Lesne, N. Allio, and R. Valle: Acta Mater., 1995, vol. 43, pp. 4247–66.
M.D. Dighe and A.M. Gokhale: Scripta Mater., 1997, vol. 37, pp. 1435–40.
P. Louis and A.M. Gokhale: Acta Metall. Mater., 1996, vol. 44, pp. 1519–28.
Pascal Louis and A.M. Gokhale: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1449–56.
J.R. Brokenbrough and W.H. Hunt: Scripta Metall. Mater., 1992, vol. 27, pp. 385–90.
J. Wulf, T. Steinkopff, and H.F. Fischmeister: Acta Mater., 1996, vol. 44, pp. 1765–79.
J.R. Rice and M.D. Tracy: J. Mech. Phys. Solids, 1969, vol. 17, pp. 201–10.
A. Al-Ostaz and I. Jasiuk: Acta Mater., 1997, vol. 45, pp. 4131–43.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gokhale, A.M., Yang, S. Application of image processing for simulation of mechanical response of multi-length scale microstructures of engineering alloys. Metall Mater Trans A 30, 2369–2381 (1999). https://doi.org/10.1007/s11661-999-0245-z
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-999-0245-z