Abstract
A study has been made of the fatigue-crack propagation properties of a series of laminated Nb-reinforced Nb3Al intermetallic-matrix composites with varying microstructural scale but nominally identical reinforcement volume fraction (20 pct Nb). It was found that resistance to fatigue-crack growth improved with increasing metallic layer thickness (in the range 50 to 250 µm) both in the crack-divider and crack-arrester orientations. For a given layer thickness, however, the properties in the crack-arrester orientation were superior to the crack-divider orientation. Indeed, the fatigue resistance of the crack arrester laminates was better than the fatigue properties of unreinforced Nb3Al and pure Nb; both laminate orientations had significantly better fatigue properties than Nb-particulate reinforced Nb3Al composites. Such enhanced fatigue performance was found to result from extrisic toughening in the form of bridging metal ligaments in the crack wake, which shielded the crack tip from the applied (far-field) driving force. Unlike particulate-reinforced composites, such bridging was quite resilient under cyclic loading conditions. The superior crack-growth resistance of the crack-arrester laminates was found to result from additional intrinsic toughening, specifically involving trapping of the entire crack front by the Nb layer, which necessitated crack renucleation across the layer.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
P.A. Mataga: Acta Metall., 1989, vol. 37 (12), pp. 3349–59.
H.E. Dève, A.G. Evans, G.R. Odette, R. Mehrabian, M.L. Emiliani, and R.J. Hecht: Acta Metall. Mater., 1990, vol. 38 (8), pp. 1491–1502.
M. Bannister and M.F. Ashby: Acta Metall. Mater., 1991, vol. 39 (11), pp. 2575–82.
T.C. Lu, A.G. Evans, R.J. Hecht, and R. Mehrabian: Acta Metall. Mater., 1991, vol. 38 (8), pp. 1853–62.
J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall. Mater., 1995, vol. 43 (5), pp. 1955–67.
S.M. Pickard and A.K. Ghosh: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 909–21.
K.T. Venkateswara Rao, G.R. Odette, and R.O. Ritchie: Acta Metall. Mater., 1994, vol. 42 (3), pp. 893–911.
K.T. Venkateswara Rao, G.R. Odette, and R.O. Ritchie: Acta Metall. Mater., 1992, vol. 40 (2), pp. 353–361.
G.R. Odette, B.L. Chao, J.W. Sheckhard, and G.E. Lucas: Acta Metall. Mater., 1992, vol. 40 (9), pp. 2381–89.
D.R. Bloyer, K.T. Venkateswara Rao, and R.O. Ritchie: Mater. Sci. Eng. A, 1996, vol. A216, pp. 80–90.
D.R. Bloyer, K.T. Venkateswara Rao, and R.O. Ritchie: Johannes Weertman Symp., R.J. Arsenault, D. Cole, T. Gross, G. Kostorz, P.K. Liaw, S. Parameswaran, and H. Sizek, eds., TMS, Warrendale, PA, 1996, pp. 261–66.
D.R. Bloyer, K.T. Venkateswara Rao, and R.O. Ritchie: Layered Materials for Structural Applications, Materials Research Society Symposia Proceedings, J.J. Lewandowski, C.H. Ward, M.R. Jackson, and W.H. Hunt, Jr., eds., Materials Research Society, Pittsburgh, PA, 1996, vol. 434, pp. 243–48.
D.R. Bloyer, K.T. Venkateswara Rao, and R.O. Ritchie: Mater. Sci. Eng. A, 1997, vol. A239–A240, pp. 393–98.
D.R. Bloyer, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2483–96.
K. Badrinarayanan, A.L. McKelvey, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3781–92.
L. Murugesh, K.T. Venkateswara Rao, and R.O. Ritchie: Scripta Metall. Mater., 1993, vol. 29, pp. 1107–12.
C.D. Bencher, A. Sakaida, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2027–33.
P.C. Paris and F. Erdogan: J. Bas. Eng., Trans. ASME, 1963, vol. 85, pp. 528–34.
R.H. Dauskardt, M.R. James, J.R. Porter, and R.O. Ritchie: J. Am. Ceram. Soc., 1992, vol. 75 (4), pp. 759–71.
J.P. Campbell, A.L. Mckelvey, S. Lillibridge, K.T. Venkateswara Rao, and R.O. Ritchie: in Deformation and Fracture of Ordered Intermetallic Materials III, W.O. Soboyejo, T.S. Srivatsan, and H.L. Fraser, eds., TMS, Warrendale, PA, 1996, pp. 141–57.
R.O. Ritchie: Int. Met. Rev., 1979, vol. 20 (5–6), pp. 205–30.
S. Suresh and R.O. Ritchie: in Fatigue Crack Growth Threshold Concepts, D.L. Davidson and S. Suresh, eds., TMS-AIME, Warrendale, PA, 1984, pp. 227–61.
C.J. Gilbert, R.H. Dauskardt, and R.O. Ritchie: J. Am. Ceram. Soc., 1995, vol. 78 (9), pp. 2291–2300.
R.O. Ritchie: Mater. Sci. Eng. A, 1988, vol. A103, pp. 15–28.
T. Fett and D. Munz: “Stress Intensity Factors and Weight Functions for One-Dimensional Cracks,” Institut fur Materialforschung, Kernforschungszentrum Karlsruhe, Germany, 1994.
B.N. Cox and D.B. Marshall: Acta Metall. Mater., 1991, vol. 39 (4), pp. 579–89.
B.N. Cox and C.S. Lo: Acta Metall. Mater., 1992, vol. 40 (1), pp. 69–80.
F. Erdogan and P.F. Joseph: J. Am. Ceram. Soc., 1989, vol. 72 (2), pp. 262–70.
R.M.L. Foote, Y.W. Mai, and B. Cotterell: J. Mech. Phys. Solids, 1986, vol. 34 (6), pp. 593–607.
A.C. Kaya and F. Erdogan: Int. J. Fract., 1980, vol. 16 (2), pp. 171–90.
T. Fett: Int. J. Fracture, 1993, vol. 63, pp. R81-R85.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bloyer, D.R., Ritchie, R.O. & Venkateswara Rao, K.T. Fatigue-crack propagation behavior of ductile/brittle laminated composites. Metall Mater Trans A 30, 633–642 (1999). https://doi.org/10.1007/s11661-999-0055-3
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-999-0055-3