Abstract
Surface segregation behavior of solute atoms has been studied on low-carbon steels used in producing galvannealed sheet steels for automotive body panel applications. Samples of cold-rolled low-carbon steels with different amounts of carbon and phosphorus in solution were heated in a vacuum chamber and their surface chemistries analyzed by Auger electron spectroscopy. For the steels studied here, one or more of the elements carbon, phosphorus, and sulfur accumulated significantly at the surface within a temperature window of 300 to 973 K. As the temperature was increased, carbon appeared on the surface first, followed by phosphorus, and then sulfur. Each succeeding segregating element displaced the previous one from the surface. The free solute concentration in the bulk and the temperature were critical factors controlling the amount of solute accumulation at the surface. Once segregated, the solute atoms remained on the surface as the samples cooled. Carbon and/or boron in steels retarded the transport of phosphorus to the surface. The implications of these findings in understanding the galvannealing behavior of these steels are discussed.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
V. Jagannathan: JOM, 1993, vol. 45 (8), pp. 48–51.
B.M. Gray, C. Belleau, M.A. D’Amico, R.L. Pyle, and J.F. Butler: 1989 Mechanical Working and Steel Processing Proc., ISS, Warrendale, PA, 1989, pp. 3–15.
A.M. Kalson, Jr.: Proc. Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech), The Iron and Steel Institute of Japan, Tokyo, 1989, pp. 271–77.
H.H. Lee and D. Hiam: Corrosion, 1989, vol. 45, pp. 852–56.
C. Cheng, V. Rangarajan, L.L. Franks, and J. L’Ecuyer: 2nd Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Verlag Stahleisen mbH, Dusseldorf, 1992, pp. 122–26.
C.S. Lin and M. Meshii: Galvatech ’95 Conf. Proc., ISS, Warrendale, PA, 1995, pp. 477–84.
C.S. Lin, M. Meshii, and C.C. Cheng: Galvatech ’95 Conf. Proc., ISS, Warrendale, PA, 1995, pp. 485–95.
C.S. Lin and M. Meshii: Galvatech ’95 Conf. Proc., ISS, Warrendale, PA, 1995, pp. 335–42.
W. Leijon and I. Olefjord: Scand. J. Metall., 1982, vol. 12, pp. 239–45.
R.M. Hudson, H.E. Biber, E.J. Oles, Jr., and C.J. Warning: Metall. Trans. A, 1977, vol. 8A, pp. 1713–19.
J.M. Mataigne, M. Lamberigts, and V. Leroy: Developments in the Annealing of sheet Steels, TMS, Warrendale, PA, 1992, pp. 511–28.
J.P. Servais, H. Grass, and V. Leroy: CRM, Met. Rep., 1975, vol. 44, pp. 29–42.
H.J. Grabke, V. Leroy, and H. Viefhaus: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 95–113.
H.J. Grabke and H. Viefhaus: in Surface Segregation Phenomena, P.A. Dowben and A. Miller, eds., CRC Press Inc., Boca Raton, FL, 1990, pp. 207–40.
K. Hennesen, H. Keller, and H. Viefhaus: Scripta Metall., 1984, vol. 18, pp. 1319–22.
P. Gruzin and V.V. Mural: Fiz. Metall. Metalloved., 1964, vol. 17, (3), pp. 384–89.
N. Kino, M. Yamada, Y. Tokunaga, and H. Tsuchiya: Metallurgy of Vacuum-Degassed Steel Products, R. Pradhan, ed., TMS, Warrendale, PA, 1990, pp. 197–213.
M. Guttmann, Y. Lepretre, A. Aubry, M.J. Roch, T. Moreau, P. Drillet, J.M. Mataigne, and H. Baudin: Galvatech ′95 Conf. Proc., ISS, Warrendale, PA, 1995, pp. 295–307.
C. Coffin and S.W. Thompson: Galvatech ′95 Conf. Proc., ISS, Warrendale, PA, 1995, pp. 121–31.
G.L. Esperance, J.L. Ecuyer, A. Simard, M.P. Barreto, and G. Botton: 2nd Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet, Verlag Stahleisen mbH, Dusseldorf, 1992, pp. 442–48.
T. Nakamori and A. Shibuya: in Corrosion-Resistant Automotive Steel Sheet, L. Allegra, ed., ASM INTERNATIONAL, Metals Park, PA, 1988, pp. 139–49.
E.T. McDevitt, L. Pelayo, Y. Morimoto, and M. Meshii: 39th MWSP Conf. Proc., ISS, Warrendale, PA, 1998, vol. XXXV, pp. 127–36.
E.T. McDevitt, Y. Morimoto, and M. Meshii: 39th MWSP Conf. Proc., ISS, Warrendale, PA, 1998, vol. XXXV, pp. 215–24.
Several papers in Zinc-Based Steel Coating Systems: Production and Performance, TMS, Warrendale, PA, 1998.
V. Rangarajan: Steel in Automotive Applications, SAE International, Warrendale, PA, 1997, pp. 1–11.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rangarajan, V., Toncheff, R. & Franks, L.L. Surface segregation of phosphorus, carbon, and sulfur in commercial low-carbon grades of steel. Metall Mater Trans A 29, 2707–2715 (1998). https://doi.org/10.1007/s11661-998-0311-y
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-998-0311-y