Article PDF
Avoid common mistakes on your manuscript.
References
C.D. Little and P.M. Machmeier: U.S. Patent 4,076,525, 1978.
R. Ayer and P.M. Machmeier: Metall. Trans. A, 1993, vol. 24A, pp. 1943–55.
G.R. Speich, D.S. Dabkowski, and L.F. Porter: Metall. Trans., 1973, vol. 4, pp. 303–15.
G.R. Speich: Innovations in Ultrahigh Strength Steel Technology, Proc. 34th Sagamore Army Materials Research Conf., G.B. Olson, M. Azrin, and E.S. Wright, eds., U.S. Army Materials Technology Laboratory, Watertown, MA, 1990, pp. 89–110.
E.C. Bain and H.W. Paxton: Alloying Elements in Steels, ASM, Cleveland, OH, 1966, pp. 197–222.
F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers Ltd., London, 1978, pp. 133–40.
H. Kwon, C.M. Kim, K.B. Lee, H.R. Yang, and J.H. Lee: Metall. Trans. A, 1997, vol. 28A, pp. 621–27.
H. Kwon: Metall. Trans. A, 1991, vol. 22A, pp. 1119–22.
K.B. Lee and H. Kwon: Scripta Metall. Mater., 1992, vol. 27, pp. 1355–60.
K.H. Kim and H. Kwon: Mater. Sci. Eng. A, 1990, vol. 127, pp. 51–56.
K.B. Lee, C.K. Choi, K.H. Kim, and H. Kwon: Mater. Sci. Eng. A, 1991, vol. 147, pp. 175–80.
K.H. Kim and H. Kwon: Scripta Metall. Mater., 1990, vol. 24, pp. 1355–60.
H. Kwon, K.B. Lee, H.R. Yang, J.B. Lee, and Y.S. Kim: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 775–84.
W.M. Garrison, Jr. and N.R. Moody: Metall. Trans. A, 1987, vol. 18A, pp. 1257–63.
K.J. Handerhan, W.M. Garrison, Jr., and N.R. Moody: Metall. Trans. A, 1989, vol. 20A, pp. 105–23.
J.L. Maloney and W.M. Garrison, Jr.: Scripta Metall., 1989, vol. 23, pp. 2097–2100.
H. Kwon: Scripta Metall., 1989, vol. 23, pp. 1001–04.
H. Kwon, C.M. Kim, K.B. Lee, H.R. Yang, and J.H. Lee: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3343–46.
A.T. Davenport and R.W.K. Honeycomb: Met. Sci., 1975, vol. 9, pp. 201–08.
J.J. Irani and R.W.K. Honeycomb: J. Iron Steel Inst., 1966, vol. 203, pp. 826–33.
D. Raynor, J.A. Whiteman, and R.W.K. Honeycomb: J. Iron Steel Inst., 1966, vol. 204, pp. 349–54.
R.J. Tunney and N. Ridley: Met. Sci., 1979, vol. 13, pp. 585–90.
R.A. Clark and G. Thomas: Metall. Trans. A, 1975, vol. 6A, pp. 969–79.
M. Schmidt and R. Hemphil: Innovations in Ultrahigh Strength Steel Technology, Proc. 34th Sagamore Army Materials Research Conf., G.B. Olson, M. Azrin, and E.S. Wright eds., U.S. Army Materials Technology Laboratory, Watertown, MA, 1990, pp. 239–60.
G.B. Olson: Innovations in Ultrahigh Strength Steel Technology, Proc. 34th Sagamore Army Materials Research Conf., G.B. Olson, M. Azrin, and E.S. Wright, eds., U.S. Army Materials Technology Laboratory, Watertown, MA, 1990, pp. 3–66.
V.K. Chandhok, J.P. Hirth, and E.J. Dulis: Trans. ASM, 1963, vol. 56, pp. 677–93.
Author information
Authors and Affiliations
Additional information
This work was supported by NON-DIREDTED RESEARCH FUND, Korea Research Foundation, 1996.
Rights and permissions
About this article
Cite this article
Kwon, H., Lee, J.H., Lee, K.B. et al. Effects of Co and Ni on secondary hardening and fracture behavior of martensitic steels bearing W and Cr. Metall Mater Trans A 29, 397–401 (1998). https://doi.org/10.1007/s11661-998-0191-1
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-998-0191-1