Abstract
A study has been made of how impurities (Na and K) and trace additions of indium, magnesium, and silicon affect the microstructure and related mechanical properties of an Al-Cu-Li alloy. Transmission electron microscopy (TEM) was used to determine the size and distribution of particles in four alloys. Indium and magnesium are both seen to stimulate T 1 precipitation. Indium also modifies ϑ″ morphology, and magnesium greatly increases the number density of ϑ″ precipitates. Strain localization was observed in underaged Al-Cu-Li-In tensile samples, consistent with observed changes in precipitate structure. No superposition of the effects of indium and magnesium was seen. High-resolution analytical microscopy was used to inspect precipitates for segregation of trace elements during early stages of aging, but no segregation was found within the detection limits of the system. Variations in heat treatment were made in order to study nucleation kinetics and trace element interactions with vacancies. Indium, with a binding energy less than that of lithium, was not seen to interact with quenched-in vacancies, while magnesium, with a binding energy greater than that of lithium, had a strong interaction. Yield anisotropies and fracture toughnesses were measured. Removal of trace impurities of sodium and potassium correlated with improved fracture properties. Magnesium was observed to increase anisotropy, especially in the T8 temper. A model was used to explain the anisotropy data in terms of texture and precipitate distribution.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
I.J. Polmear: Light Alloys: Metallurgy of the Light Metals, 2nd ed. Edward Arnold, New York, NY, 1989.
A.K. Mukhopadhyay, G.J. Shiflet, and E.A. Starke, Jr.: Morris E. Fine Symp., P.K. Liaw, J.R. Weertman, H.L. Marcus, and J.S. Santner, eds., TMS, Warrendale, PA, 1991, p. 283.
W.F. Hosford and R.H. Zeisloft: Metall. Trans., 1972, vol. 3, pp. 113–21.
M.A. Przystupa, A.K. Vasudevan, and W.G. Fricke, Jr.: 8th Int. Conf. on Textures of Materials, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1988, p. 1051.
A.K. Vasudevan, W.G. Fricke, Jr., M.A. Przystupa, and S. Panchanadeeswaran: 8th Int. Conf. on Textures of Materials, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1988, p. 1071.
A.K. Vasudevan, M.A. Przystupa, and W.G. Fricke, Jr.: Scripta Metall., 1990, vol. 24, p. 1429.
A.K. Vasudevan and M.A. Przystupa: Aluminum-Lithium Alloys for Aerospace Applications Workshop, NASA Conference Publication No. 3287, B.N. Bhat, T.T. Bales, and E.J. Vesely, Jr., eds., NASA, Washington, DC, 1994.
C.P. Blankenship, Jr., E. Hornbogen, and E.A. Starke, Jr.: Mater. Sci. Eng., 1993, vol. A169, p. 33.
A.H. Sully, H.K. Hardy, and T.J. Heal: J. Inst. Met., 1949, vol. 76, p. 269.
H.K. Hardy: J. Inst. Met., 1950–51, vol. 78, p. 169.
H.K. Hardy: J. Inst. Met., 1951–52, vol. 80, p. 483.
J.D. Boyd and R.B. Nicholson: Acta Metall., 1971, vol. 19, p. 1101.
J.M. Silcock: Phil. Mag., 1959, vol. 8, p. 1187.
R. Sankaran and C. Laird: Mater. Sci. Eng., 1974, vol. 14, p. 271.
H. Suzuki, M. Kanno, and K. Fukunaga: J. Jpn. Inst. Light Met., 1975, vol. 25, p. 413.
J.B.M. Nuyten: Acta Metall., 1967, vol. 15, p. 1765.
J.M. Silcock, T.J. Heal, and H.K. Hardy: J. Inst. Met., 1955–56, vol. 84, p. 23.
S.P. Ringer, K. Hono, and I.J. Polmear: 4th Int. Conf. on Aluminum Alloys, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Georgia Institute of Technology, Atlanta, GA, 1994, vol. 1, p. 574.
E.H. Spuhler: Alcoa Alloy X2020, Aluminum Company of America Green Letter, Alcoa, Alcoa Center, PA, Sept. 1958.
I.M. LeBaron: U.S. Patent No. 2,381,219, 1945.
J.M. Silcock: J. Inst. Met., 1959–60, vol. 88, p. 357.
L. Blackburn and E.A. Starke, Jr.: in Aluminum-Lithium Alloys V, E.A. Starke, Jr. and T.H. Sanders, Jr., eds., MCEP, Birmingham, United Kingdom, 1989, p. 751.
R.K. Wyss and R.E. Sanders, Jr.: Metall. Trans. A, 1988, vol. 19A, pp. 2523–30.
W.K. Armitage: J. Inst. Met., 1970, vol. 98, p. 46.
J.J. Regidor and A. Sanchez: 6th Int. Light Metals Congr., Aluminium-Verlag GMBH, Düsseldorf, Germany, 1975, p. 29.
C.G. Bennett and D. Webster: 4th Int. Conf. on Aluminum Alloys, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Georgia Institute of Technology, Atlanta, GA, 1994, p. 98.
E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, MA, 1970.
B.W. Williams: Practical Analytical Electron Microscopy in Materials Science, Verlag Chemie International, New York, NY, 1984.
U.F. Kocks, J.S. Kallend, H.R. Wenk, A.D. Rollett, and S.I. Wright: popLA-Preferred Orientation Package-Los Alamos, Los Alamos National Laboratory, Los Alamos, NM, July, 1994.
M.J. Haynes and R.P. Gangloff: J. Test. Eval., vol. 25, 1996, p. 82.
M.T. Lyttle and J.A. Wert: Metall. Mater. Trans. A, 1996, vol. 28A, p. 3503.
J.F. Nie, B.C. Muddle, and I.J. Polmear: 5th Int. Conf. on Aluminium Alloys, part 2, J.H. Driver, B. Dubost, F. Durand, R. Fougeres, P. Guyot, P. Sainfort, and M. Suery, eds., appeared in Mater. Sci. Forum, 1996, vols. 217–222, p. 1257.
L.M. Brown and R.K. Ham: Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Wiley, New York, NY, 1971, p. 12.
L.F. Mondolfo: Aluminum Alloys, Butterworth and Co., London, 1979, p. 69.
B. Noble, S.J. Harris, and K. Dinsdale: Met. Sci., 1982, vol. 16, p. 425.
S.J. Harris, B. Noble, and K. Dinsdale: 4th Int. Aluminium Lithium Conf., G. Champier, B. Dubost, D. Miannay, and L. Sabetay, eds., Les Editions Physique, Les Ulis, France, 1987, pp. C3–415.
P.M. Kelly: Scripta Metall., 1972, vol. 6, p. 647.
P. Merle, F. Fouquet, and J. Merlin: Mater. Sci. Eng., 1981, vol. 50, p. 215.
J.C. Huang and A.J. Ardell: 4th Int. Aluminium Lithium Conf., G. Champier et al., eds., Les Editions Physique, Les Ulis, France, 1987, pp. C3–373.
W.M. Stobbs and G.R. Purdy: Acta Metall., 1978, vol. 26, p. 1069.
U. Dahmen and K.H. Westmacott: Phys. Status Solidi. A, 1983, vol. 80, p. 249.
A.J. Ardell: Metall. Trans. A, 1985, vol. 16A, pp. 2131–65.
P. Bate, W.T. Roberts, and D.V. Wilson: Acta Metall., 1981, vol. 29, p. 1797.
P. Bate, W.T. Roberts, and D.V. Wilson: Acta Metall., 1982, vol. 30, p. 725.
J.D. Eshelby: Proc. R. Soc., 1957, vol. A241, p. 376.
L.M. Brown and W.M. Stobbs: Phil. Mag. 1971, vol. 23, p. 1185.
M.E. O’Dowd: Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 1987.
M.E. O’Dowd, W. Ruch, and E.A. Starke, Jr.: 4th Int. Aluminium Lithium Conf., G. Champier et al., eds., Les Editions Physique, Les Ulis, France, 1987, pp. C3–565.
F. Fouquet, P. Merle, M. Kohen, J. Merlin, and P.F. Gobin: Acta Metall., 1979, vol. 27, p. 315.
K.M. Entwistle, J.H. Fell, and K.I. Koo: J. Inst. Met., 1962–63, vol. 91, p. 84.
S. Özbilen and H.M. Flower: Acta Metall., 1989, vol. 37, 2993.
A.J. Perry: Acta Metall., 1966, vol. 14, p. 1143.
A. Garg and J.M. Howe: Acta Metall., 1991, vol. 39, p. 1925.
S. Hirosawa, T. Sato, A. Kamio, K. Kobayashi, and T. Sakamoto: 4th Int. Conf. on Aluminum Alloys, T.H. Sanders, Jr. and E.A. Starke, Jr., eds., Georgia Institute of Technology, Atlanta, GA, 1994, vol. 2, p. 199.
B. Noble and G.E. Thompson: J. Met. Sci., 1972, vol. 6, p. 167.
G. Itoh, Q. Cui, and M. Kanno: Mater. Sci. Eng., 1996, vol. A211, p. 128.
W.A. Cassada, G.J. Shiflet, and E.A. Starke, Jr.: Metall. Trans. A, 1991, vol. 22A, pp. 287–97.
J.M. Duva, M.A. Daeubler, E.A. Starke, Jr., and G. Lütjering: Acta Metall., 1988, vol. 36, p. 585.
A.K. Mukhopadhyay, K.S. Prasad, and C.R. Chakravorty: 5th Conf. on Aluminium Alloys, part 2, J.H. Driver et al., eds., appeared in Mater. Sci. Forum, 1996, vols. 217–222, p. 753.
J.M. Silcock: J. Inst. Met., 1955–56, vol. 84, p. 19.
H.K. Hardy, J. Inst. Met., 1954–55, vol. 83, p. 337.
G.B. Brook and B.A. Hatt: The Mechanism of Phase Transformations in Crystalline Solids, Monograph No. 33, The Institute of Metals, London, 1969, p. 82.
J.A. Wagner and R.P. Gangloff: Scripta Metall., 1992, vol. 26, p. 1779.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gilmore, D.L., Starke, E.A. Trace element effects on precipitation processes and mechanical properties in an Al-Cu-Li alloy. Metall Mater Trans A 28, 1399–1415 (1997). https://doi.org/10.1007/s11661-997-0203-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-997-0203-6