Article PDF
Avoid common mistakes on your manuscript.
References
J.E. Hatch: Aluminum: Properties and Physical Metallurgy, ASM, Metals Park, OH, 1983, pp. 147, 167, 185, 354, and 364.
I.J. Polmear: Light Alloys, Metallurgy and Materials Science Series, 2nd ed., Edward Arnold, London, 1989, pp. 85–86, 97, and 101.
E. Hornbogen and E.A. Starke, Jr.: Acta Metall. Mater., 1993, vol. 41, pp. 1–16.
D.S. Thompson: Metall. Trans. A, 1975, vol. 6A, pp. 671–83.
A.K. Mukhopadhyay, V.V. Rama Rao, and C.R. Chakravorty: Mater. Sci. Forum, 1996, vols. 217–22, pp. 1617–22.
A.K. Mukhopadhyay and A.K. Sharma: Surface and Coatings Technology, 1997, vol. 92, pp. 212–20.
M.O. Speidel: Metall. Trans. A, 1975, vol. 6A, pp. 631–51.
N.G. Danh, K. Rajan, and W. Wallace: Metall. Trans. A, 1983, vol. 14A, pp. 1843–50.
H.A. Holl: Met. Sci. J., 1967, vol. 1, pp. 111–18.
Z. Katz and N. Ryum: Scripta Metall., 1981, vol. 15, pp. 265–68.
A.K. Mukhopadhyay, Q.B. Yang, and S.R. Singh: Acta Metall. Mater., 1994, vol. 42, pp. 3083–91.
J. Lendvai: Mater. Sci. Forum, 1996, vols. 217–22, pp. 43–56.
H. Schmalzried and V. Gerold: Z. Metallkd., 1958, vol. 49, pp. 291–301.
S.E. Naess: Scripta Metall., 1969, vol. 3, pp. 172–82.
A.K. Mukhopadhyay: Phil. Mag. Lett., 1994, vol. 70, pp. 135–40.
D.S. Thompson: in Thermal Analysis, R.T. Schwenker, Jr. and P.D. Garn, eds., Academic Press, New York, NY, 1969, vol. 2, pp. 1147–52.
G.W. Lorimer and R.B. Nicholson: The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London, 1969, pp. 36–42.
P.E. Marth, H.I. Aaronson, G.W. Lorimer, T.L. Bartel, and K.C. Russell: Metall. Trans. A, 1976, vol. 7A, pp. 1519–28.
J.T. Staley, P.A. Murrysville, and R.R. Sawtell: U.S. Patent No. 4,431,467, Feb. 14, 1984.
J.K. Park and A.J. Ardell: Metall. Trans. A, 1983, vol. 14A, pp. 1957–65.
J.K. Park and A.J. Ardell: Mater. Sci. Eng., 1989, vol. A114, pp. 197–203.
I.J. Polmear: J. Inst. Met., 1958–59, vol. 87, pp. 24–25.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mukhopadhyay, A.K. Development of reproducible and increased strength properties in thick extrusions of low-alloy Al-Zn-Mg-Cu based AA 7075. Metall Mater Trans A 28, 2429–2433 (1997). https://doi.org/10.1007/s11661-997-0200-9
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-997-0200-9