Avoid common mistakes on your manuscript.
1 Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 46A, APRIL 2015, pp. 1481–1487 DOI: 10.1007/s11661-014-2594-5
Nokeun Park’s affiliation has been updated as shown in this erratum.
The third sentence in the following text has been added to the Experimental Procedures section on page 1482 as clarification regarding the chemical composition of the whole sample:
The material used in the current study was an equimolar CoCrCuFeNi alloy (20 mol pct for each element) that was cast with the pseudo float melting process that brings almost homogeneous distribution of each element.[14] An as-cast HEA rod 10 mm in diameter and 60 mm in length was homogenized at 1373 K (1100 °C) for 12 hours, followed by water cooling. The chemical composition of homogenized specimen was measured by wavelength-dispersive X-ray spectroscopy, and the atomic percent was Co21Cr22Cu22Fe21Ni14.
Author information
Authors and Affiliations
Corresponding authors
Additional information
The online version of the original article can be found under doi:10.1007/s11661-014-2594-5.
Rights and permissions
About this article
Cite this article
Park, N., Watanabe, I., Terada, D. et al. Erratum to: Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy. Metall Mater Trans A 46, 3308 (2015). https://doi.org/10.1007/s11661-015-2915-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-015-2915-3