Abstract
A computational alloy design approach has been used to identify a ductile matrix for Nb-based in-situ composites containing Ti, Hf, Cr, Si, and Ge additions. Candidate alloys in the form of cast buttons were fabricated by arc melting. Coupon specimens were prepared and heated treated to vary the microstructure. Backscattered electron (BSE) microscopy, quantitative metallography, energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD) were utilized to characterize the morphology, volume fraction, composition, and crystallography of individual phases in the microstructure. The fracture toughness of the composites was characterized by three-point bending and compact-tension techniques, while the fracture toughness of individual phases in the in-situ composites was determined by an indentation technique. The composition, crystallography, and volume fraction of individual phases were correlated with the fracture-toughness results to assess (1) the role of constituent properties in the overall fracture resistance of the composites and (2) the effectiveness of the computational design approach. The results indicated that the effects of alloy addition and plastic constraint on fracture toughness were reasonably predicted, but the conditions for relaxing plastic constraint to attain higher fracture toughness were not achieved.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D.L. Anton and D.M. Shah: MRS Symp. Proc., 1990, vol. 194, pp. 175–82.
R.M. Nekkanti and D.M. Dimiduk: MRS Symp. Proc., 1990, vol. 194, pp. 175–82.
M.G. Mendiratta and D.M. Dimiduk: Metall. Trans. A, 1993, vol. 24A, pp. 501–04.
P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk: JOM, 1996, vol. 48, pp. 33–38.
M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, and H.A. Lipsitt: JOM, 1996, vol. 48, pp. 39–44.
B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801–08.
D.L. Davidson, K.S. Chan, and D.L. Anton: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3007–18.
K.S. Chan and D.L. Davidson: JOM, 1996, vol. 48(9), pp. 62–68.
P.R. Subramanian, M.G. Mendiratta, D.M. Dimiduk, and M.A. Stucke: Mater. Sci. Eng., 1997, vols. A239–A240, pp. 1–13.
H.A. Lipsitt, M. Blackburn, and D.M. Dimiduk: in Intermetallic Compounds—Principles and Practice—Vol. 3, J. H. Westbrook and R.L. Fleischer, eds., John Wiley, New York, NY, 2002, pp. 471–99.
B.P. Bewlay and M.R. Jackson: in Comprehensive Composite Materials, A Kelly and C. Zweben, eds. vol. 3, Metal Matrix Composites, T.W. Clyne, ed., Elsevier, New York, NY, 2000, vol. 3, pp. 579–613.
J.-C. Zhao, B.P. Bewlay, M.R. Jackson, and L.A. Peluso: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds. TMS, Warrendale, PA, 2001, pp. 483–91; also J.-C. Zhao: GE CR&D, Schenectady, NY, private communication, 2001.
P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk: MRS Symp. Proc., 1994, vol. 322, pp. 491–502.
B.P. Bewlay, M.R. Jackson, W.J. Reeder, and H.A. Lipsitt: MRS Symp. Proc., 1995, vol. 364, pp. 943–48.
J.D. Rigney, P.M. Singh, and J.J. Lewandowski: JOM, 1992, vol. 44(8), pp. 36–41.
J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall. Mater., 1995, vol. 43, pp. 1955–67.
K.S. Chan and D.L. Davidson: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 925–39.
D.L. Davidson and K.S. Chan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2007–18.
K.S. Chan: Mater. Sci. Eng., 2002, vols. A329–A331, pp. 513–22.
D.J. Thomas, K.A. Nibur, K.C. Chen, J.C. Cooley, L.B. Dauelsberg, W.L. Hults, and P.G. Kotula: Mater. Sci. Eng., 2002, vols. A329–A331, pp. 408–15.
D. Farkas, S.J. Zhou, C. Vacilhe, B. Mutasa, and J. Panova: J. Mater. Res., 1977, vol. 12, pp. 93–99.
D. Farkas: Mater. Sci. Eng., 1998, vol. A249, pp. 249–58.
U.V. Waghmare, E. Kaxiras, V.V. Bulatov, and M.S. Duesberry: Modelling Simul. Mater. Sci. Eng., 1998, vol. 6, pp. 493–506.
J.R. Rice: J. Mech. Phys. Solids, 1992, vol. 40, pp. 239–71.
K.S. Chan: Metall. Mater. Trans. A, 2001, vol. 32A pp. 2475–87.
K.S. Chan: Mechanisms and Mechanics of Fracture: The John F. Knott Symp. W.O. Soboyejo, J.J. Lewandowski, and R.O. Ritchie, eds., TMS, Warrendale, PA, 2002, pp. 143–48.
P.B. Hirsch and S.G. Roberts: Phil. Mag. A, 1991, vol. 64, pp. 55–80.
S.G. Roberts and A.S. Booth: Acta Mater., 1997, vol. 45, pp. 1045–53.
P.B. Hirsch and S.G. Roberts: in Cleavage Fracture, Proc. George R. Irwin Symp., Kwai S. Chan, ed., TMS, Warrendale, PA, 1997, pp. 137–45.
R.E. Peierls: Proc. Phys. Soc., 1940, vol. 52, pp. 34–37.
F.R.N. Nabarro: Proc. Phys. Soc., 1947, vol. 59, pp. 236–394.
K.S. Chan and D.L. Davidson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2717–27.
K.S. Chan: Mater. Sci. Eng., 2002, vol. A337, pp. 59–66.
K.S. Chan: Southwest Research Institute, San Antonio, TX, unpublished research, 2003.
M.R. Jackson: General Electric Global Research Laboratories, Schenectady, NY, unpublished research and private communications, 1999.
J.N. Wang: Mater. Sci. Eng. A, 1996, vol. A206, pp. 259–69.
J.N. Wang: Acta Mater., 1996, vol. 44, pp. 1541–46.
G. Wang, B. Gleeson, and D.L. Douglass: Oxid. Met., 1991, vol. 35, pp. 333–48.
Y.-W. Kim: UES, Inc., Dayton, OH, unpublished research and private communications, 2000.
Annual Book of ASTM Standards, Vol. 03.01, ASTM E39-90, ASTM, Philadelphia, PA, 1995, pp. 412–42.
D.L. Davidson and A. Nagy: J. Phys. E, 1978, vol. 11, pp. 207–10.
G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–38.
P. Chantikul, G.R. Anstis, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 539–43.
B.R. Lawn, A.G. Evans, and D.B. Marshall: J. Am. Ceram. Soc., 1980, vol. 63, pp. 574–81.
S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, U. K. 1991, pp. 283–87.
J.R. Brockenbrough and S. Suresh: J. Mech. Phys. Solids, 1987, vol. 35, pp. 721–42.
S. Suresh: in Modeling of Plastic Deformation and Its Engineering Applications, 13th Risø Int. Symp. on Materials Science, S.I. Andersen, J.B. Bilde-Sørensen, N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, 1992, pp. 111–24.
Joint Committee on Powder Diffraction Files, International Center for Diffraction Data, Swarthmore, PA, 1992.
M.G. Mendiratta: UES, Dayton, OH, private communication, 2001.
P.M. Hazzledine, K.S. Kumar, D.B. Miracle, and A.G. Jackson: MRS Symp. Proc., 1993, vol. 288, pp. 591–96.
K.S. Chan: Proc. Thermec 2003, Mater. Science Forum, 2003, in press; also Southwest Research Institute, San Antonio, TX, unpublished results, 2003.
K. Ito, K. Ihara, K. Tanaka, M. Fujikura, and M. Yamaguchi: Intermetallics, 2001, vol. 9, pp. 591–602.
Y. Harada, M. Morinaga, J.I. Saito, and Y. Takagi: J. Phys: Condens. Matter., 1997, vol. 9, pp. 8011–30.
A.F. Bower and M. Ortiz: J. Mech. Phys. Solids, 1991, vol. 39, pp. 815–58.
K.S. Chan, D.L. Davidson, and D.L. Anton: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1797–808.
D.L. Davidson and K.S. Chan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 401–16.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chan, K.S., Davidson, D.L. Improving the fracture toughness of constituent phases and Nb-based in-situ composites by a computational alloy design approach. Metall Mater Trans A 34, 1833–1849 (2003). https://doi.org/10.1007/s11661-003-0149-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11661-003-0149-2