Abstract
The characteristics of a rotating stall of an impeller and diffuser and the evolution of a vortex generated at the diffuser leading-edge (i.e., the leading-edge vortex (LEV)) in a centrifugal compressor were investigated by experiments and numerical analysis. The results of the experiments revealed that both the impeller and diffuser rotating stalls occurred at 55 and 25 Hz during off-design flow operation. For both, stall cells existed only on the shroud side of the flow passages, which is very close to the source location of the LEV. According to the CFD results, the LEV is made up of multiple vortices. The LEV is a combination of a separated vortex near the leading- edge and a longitudinal vortex generated by the extended tip-leakage flow from the impeller. Therefore, the LEV is generated by the accumulation of vorticity caused by the velocity gradient of the impeller discharge flow. In partial-flow operation, the spanwise extent and the position of the LEV origin are temporarily transmuted. The LEV develops with a drop in the velocity in the diffuser passage and forms a significant blockage within the diffuser passage. Therefore, the LEV may be regarded as being one of the causes of a diffuser stall in a centrifugal compressor.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Senoo, Y., Kinoshita, Y., and Ishida, M., (1977), Asymmetric Flow in Vaneless Diffusers of Centrifugal Blowers, ASME Journal of Fluids Engineering, Vol. 99, pp. 104–114.
Senoo, Y., and Kinoshita, Y., (1978), Limits of Rotating Stall and Stall in Vaneless Diffuser of Centrifugal Compressors, ASME Paper No.78-GT-19, London, England.
Haupt, U., Seidel, U., Abdel-Hamid, A. N., and Rautenberg, M., (1988), Unsteady Flow in a Centrifugal Compressor with Different Types of Vaned Diffusers, ASME Journal of Turbomachinery, vol. 110, pp. 293–303.
Iwakiri, K., Furukawa, M., Ibaraki, S., and Tomita, I., (2009), Unsteady and Three-Dimensional Flow Phenomena in a Transonic Centrifugal Compressor Impeller at Rotating Stall, Proceedings of ASME Turbo Expo 2009, Orlando, USA, GT2009-59516.
Spakovsky, Z. S. and Roduner, C. H., (2007), Spike and Modal Stall Inception in an Advanced Turbocharger Centrifugal Compressor, Proceedings of ASME Turbo Expo 2007, Montreal, Canada, GT2007-27634.
Ohta, Y., Goto, T., and Outa, E., (2010), Unsteady Behavior and Control of Diffuser Leading-edge Vortex in a Centrifugal Compressor, Proceedings of ASME Turbo Expo 2010, Glasgow, UK,GT2010-22394.
Fujisawa, N., Hara, S., and Ohta, Y., (2014), Unsteady Behavior of Leading-edge Vortex and Diffuser Stall Inception in a Centrifugal Compressor with Vaned Diffuser, Proceedings of ASME FEDSM 2014, Chicago, USA, FEDSM2014-21242.
Steger, J. L., and Warming, R. F., (1981), Flux Vector Splitting of the Inviscid Gasdynamic Equations with Application to Finite-Difference Methods, Journal of Computational Physics, Vol. 40, pp. 263–293.
van Leer, B., (1979), Towards the Ultimate Conservative Difference Scheme V: A Second-Order Sequel to Godunov’s Method, Journal of Computational Physics, Vol. 32, pp. 101–136
Shima, E., (1997), “A simple implicit scheme for structured/unstructured cfd”, Proceedings of 29th Fluid Dynamic Conference, Hokkaido, Japan, pp. 325–328. (in Japanese)
Spalart, P. R., Jou, M.-H., Strelets, M., and Allmaras, S. R., (1997), Comments on the Feasibility of LES for Wings and on the Hybrid RANS/LES Approach, Advances in DNS/LES, Proceedings of the First AFOSR International Conference on DNS/LES, Columbus, USA.
Strelets, M., (2001), Detached Eddy Simulation of Massively Separated Flows, AIAA Paper, 2001-0879, Reno, USA.
Thompson, K. W., (1987), Time Dependent Boundary Conditions for Hyperbolic Systems, Journal of Computational Physics, Vol. 68, pp. 1–24.
Steger, J. L., Dougherty, F. C., and Benek, J. A., (1983), A Chimera Grid Schemes, ASME FED-vol. 5.
Ohta, Y., Takehara, N., Okutsu, Y., and Outa, E., (2005), Effects of Diffuser Vane Geometry on Interaction Noise Generated from a Centrifugal Compressor, Journal of Thermal Science, Vol. 14, No. 4, pp. 321–328.
Goto, T., Ohta, Y., and Outa, E., (2007), Improvement of Aerodynamic Performance and Noise Reduction of Centrifugal Compressor with Tapered Diffuser Vanes, Proceedings of the International Gas Turbine Congress 2007, Tokyo, Japan, TS-033 (CD-ROM).
Jeong, J. and Hussain, F., (1995), On the Identification of a Vortex, Journal of Fluid Mechanics, Vol. 285, pp. 69–94
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fujisawa, N., Hara, S. & Ohta, Y. Unsteady behavior of leading-edge vortex and diffuser stall in a centrifugal compressor with vaned diffuser. J. Therm. Sci. 25, 13–21 (2016). https://doi.org/10.1007/s11630-016-0829-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11630-016-0829-z