Abstract
Fe-based coatings reinforced by spherical tungsten carbide were deposited on 304 stainless steel using plasma transferred arc (PTA) technology. The composition and phase microstructure of the coatings were evaluated using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). The corrosion behaviors of the coatings in 0.5 mol/L HCl solution were studied using polarization curve and electrochemical impedance spectroscopy (EIS) measurements. The experimental results shows that the tungsten carbide improves the corrosion resistance of the Fe-based alloy coating, but increase in the mass fraction of tungsten carbide leads to increasing amount of defects of holes and cracks, which results in an adverse effect on the corrosion resistance. The defects are mainly present on the tungsten carbide but also extend to the Fe-based matrix. The tungsten carbide, acting as a cathode, and binding material of Fe-based alloy, acting as an anode, create a galvanic corrosion cell. The binding material is preferentially corroded and causes the degradation of the coating.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Xu P, Lin CX, Zhou CY, et al. Wear and Corrosion Resistance of Laser Cladding AISI 304 Stainless Steel/Al2O3 CompositeCoatings[J]. Surf. Coat. Technol., 2014, 238(2): 9–14
Lu XL, Liu XB, Yu PC, et al. Effects of Heat Treatment on Microstructure and Mechanical Properties of Ni60/h-BN Self-lubricating Anti-wear Composite Coatings on 304 Stainless Steel by Laser Cladding[J]. Appl. Surf. Sci., 2015, 355: 350–358
Sun GF, Zhang YK, Zhang MK, et al. Microstructure and Corrosion Characteristics of 304 Stainless Steel Laser-Alloyed with Cr-CrB2[J]. Appl. Surf. Sci., 2014, 295: 94–107
Fan L, Dong YH, Chen HY, et al. Wear Properties of Plasma Transferred Arc Fe-based Coatings Reinforced by Spherical WC Particles[J]. J. Wuhan Univ. Technol.-Mater. Sci. Ed., 2019, 34(2): 433–439
Liu SS, Chen HY, Zhao X et al. Corrosion Behavior of Ni-based Coating Containing Spherical Tungsten Carbides in Hydrochloric Acid Solution[J]. J. Iron Steel Res. Int., 2019, 26(2): 191–199
Hochstrasser S, Mueller Y, Latkoczy C, et al. Analytical Characterization of the Corrosion Mechanisms of WC-Co by Electrochemical Methods and Inductively Coupled Plasma Mass Spectroscopy[J]. Corros. Sci., 2007, 49(4): 2 002–2 020
Bozzini B, Gaudenzi GPD, Serra M, et al. Corrosion Behaviour of WC-Co Based Hardmetal in Neutral Chloride and Acid Sulphate Media[J]. Mater. Corros., 2002, 53(5): 328–334
Zhou SF, Dai XQ. Microstructure Evolution of Fe-based WC Composite Coating Prepared by Laser Induction Hybrid Rapid Cladding[J]. Appl. Surf. Sci., 2010, 256: 7 395–7 399
Zhou SF, Dai XQ, Zheng HZ. Microstructure and Wear Resistance of Fe-based WC Coating by Multi-track Overlapping Laser Induction Hybrid Rapid Cladding[J]. Opt. Laser Technol., 2012, 44(1): 190–197
Huang Z, Hou Q, Ping W. Microstructure and Properties of Cr3C2-modified Nickel-based Alloy Coating Deposited by Plasma Transferred Arc Process[J]. Surf. Coat. Technol., 2008, 202(13): 2 993–2 999
Wang J, Li L, Tao W. Crack Initiation and Propagation Behavior of WC particles Reinforced Fe-based Metal Matrix Composite Produced by Laser Melting Deposition[J]. Opt. Laser Technol., 2016, 82: 170–182
Huang Y, Zeng X. Investigation on Cracking Behavior of Ni-based Coating by Laser-induction Hybrid Cladding[J]. Appl. Surf. Sci., 2010, 256(20): 5 985–5 992
Wu P, Du HM, Chen XL, et al. Influence of WC Particle Behavior on the Wear Resistance Properties of Ni-WC Composite Coatings[J]. Wear, 2004, 257(1): 142–147
Fernández MR, García A, Cuetos JM, et al. Effect of Actual WC Content on the Reciprocating Wear of a Laser Cladding NiCrBSi Alloy Reinforced with WC[J]. Wear, 2015, 324–325: 80–89
Amado JM, Yáñez A, Tobar MJ, et al. Morphology and Characterization of Laser Clad Composite NiCrBSi-WC Coatings on Stainless Steel[J]. Surf. Coat. Technol., 2006, 200(22): 6 313–6 317
Cho JE, Hwang SY, Kim KY. Corrosion Behavior of Thermal Sprayed WC Cermet Coatings Having Various Metallic Binders in Strong Acidic Environment[J]. Surf. Coat. Technol., 2006, 200(8): 2 653–2 662
Yao SH, Su YL, Shu HY, et al. Corrosive Resistance of HVOF WC Coatings with a Different Binder[J]. Key Eng. Mater., 2017, 739: 120–124
Zhang Q, Lin N, He Y. Effects of Mo Additions on the Corrosion Behavior of WC-TiC-Ni Hardmetals in Acidic Solutions[J]. Int. J. Miner. Metall. Mater., 2013, 38(3): 15–25
Sutthiruangwong S, Mori G. Corrosion Properties of Co-based Cemented Carbides in Acidic Solutions[J]. Int. J. Miner. Metall. Mater., 2003, 21(3–4): 135–145
Fan L, Chen HY, Dong YH, et al. Wear and Corrosion Resistance of Laser-cladded Fe-based Composite Coatings on AISI 4130 Steel[J]. Int. J. Miner. Metall. Mater., 2018, 25(6): 716–728
Davoodi A, Pakshir M, Babaiee M, et al. A Comparative H2S Corrosion Study of 304L and 316L Stainless Steels in Acidic Media[J]. Corros. Sci., 2011, 53(1): 399–408
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the China Postdoctoral Science Foundation (No.2017M620153) and the Science & Technology Program of Shanghai Jian Qiao University (No.SJQ19012)
Rights and permissions
About this article
Cite this article
Dong, Y., Fan, L., Chen, H. et al. Corrosion Behavior of Plasma Transferred Arc Fe-based Coating Reinforced by Spherical Tungsten Carbide in Hydrochloric Acid Solutions. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 35, 299–309 (2020). https://doi.org/10.1007/s11595-020-2257-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-020-2257-x