Abstract
In this paper, two different designs, with dummy slots and bread-loaf magnets techniques, are presented to reduce the electromagnetic vibration in integral-slot surface-mounted permanent-magnet (SPM) machines. Firstly, the stator slotting effect on the magnetic field modulation and radial force modulation is investigated. It reveals the amplitude of the modulated magnetic field and modulated radial force is greatly affected by the slot opening effect, while the spatial order is closely associated with the slot numbers. Subsequently, the dummy slots and bread-loaf magnets design are developed for a 36-slot/12-pole integral-slot SPM machine to reduce the electromagnetic vibration. Finally, two SPM machines, with conventional and bread-loaf magnets, are manufactured. Experimental tests are carried out to validate the theoretical analyses.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ma Y, Wang J, Zhou L, et al. Surrogate-assisted optimization of a five-phase SPM machine with quasi-trapezoidal PMs. IEEE Trans Ind Electron, 2022, 69: 202–212
Liu T, Zhao W, Ji J, et al. Effects of eccentric magnet on high-frequency vibroacoustic performance in integral-slot SPM machines. IEEE Trans Energy Convers, 2021, 36: 2393–2403
Zhu J, Zuo Y, Chen H, et al. Deep-investigated analytical modeling of a surface permanent magnet vernier motor. IEEE Trans Ind Electron, 2021, doi: https://doi.org/10.1109/TIE.2021.3134075
Dong Q C, Liu X T, Qi H Z, et al. Analysis and evaluation of electromagnetic vibration and noise in permanent magnet synchronous motor with rotor step skewing. Sci China Tech Sci, 2019, 62: 839–848
Ji Z, Cheng S, Lv Y, et al. The mechanism for suppressing high-frequency vibration of multiphase surface permanent magnet motors via PWM carrier phase shifting. IEEE Trans Power Electron, 2021, 36: 10504–10513
Zhu S, Zhao W, Liu G, et al. Effect of phase shift angle on radial force and vibration behavior in dual three-phase PMSM. IEEE Trans Ind Electron, 2021, 68: 2988–2998
Zou J, Lan H, Xu Y, et al. Analysis of global and local force harmonics and their effects on vibration in permanent magnet synchronous machines. IEEE Trans Energy Convers, 2017, 32: 1523–1532
Ito F, Takeuchi K, Kotsugai T, et al. A study on asymmetry of electromagnetic force modes of permanent magnet synchronous motors with rotor eccentricity. IEEE Trans Magn, 2021, 57: 1–6
Lu Y, Li J, Qu R, et al. Electromagnetic force and vibration study on axial flux permanent magnet synchronous machines with dual three-phase windings. IEEE Trans Ind Electron, 2020, 67: 115–125
Deng W, Zuo S. Electromagnetic vibration and noise of the permanent-magnet synchronous motors for electric vehicles: An overview. IEEE Trans Transp Electrific, 2019, 5: 59–70
Yang H, Chen Y. Influence of radial force harmonics with low mode number on electromagnetic vibration of PMSM. IEEE Trans Energy Convers, 2014, 29: 38–45
EL-Refaie A M. Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges. IEEE Trans Ind Electron, 2010, 57: 107–121
Valavi M, Le Besnerais J, Nysveen A. An investigation of zeroth-order radial magnetic forces in low-speed surface-mounted permanent magnet machines. IEEE Trans Magn, 2016, 52: 1–6
Wang S, Hong J, Sun Y, et al. Analysis of zeroth-mode slot frequency vibration of integer slot permanent-magnet synchronous motors. IEEE Trans Ind Electron, 2020, 67: 2954–2964
Besnerais J. Vibroacoustic analysis of radial and tangential air-gap magnetic forces in permanent magnet synchronous machines. IEEE Trans Magn, 2015, 51: 8105609
Fang H, Li D, Guo J, et al. Hybrid model for electromagnetic vibration synthesis of electrical machines considering tooth modulation and tangential effects. IEEE Trans Ind Electron, 2021, 68: 7284–7293
Zhu S, Zhao W, Ji J, et al. Investigation of bread-loaf magnet on vibration performance in FSCW PMSM considering force modulation effect. IEEE Trans Transp Electrific, 2021, 7: 1379–1389
Wang S, Hong J, Sun Y, et al. Mechanical and magnetic pivot roles of tooth in vibration of electrical machines. IEEE Trans Energy Convers, 2021, 36: 139–148
Lin F, Zuo S G, Deng W Z, et al. Reduction of vibration and acoustic noise in permanent magnet synchronous motor by optimizing magnetic forces. J Sound Vib, 2018, 429: 193–205
Zhao W, Zhu S, Ji J, et al. Analysis and reduction of electromagnetic vibration in fractional-slot concentrated-windings PM machines. IEEE Trans Ind Electron, 2022, 69: 3357–3367
Ma J, Zhu Z Q. Mitigation of unbalanced magnetic force in a PM machine with asymmetric winding by inserting auxiliary slots. IEEE Trans Ind Appl, 2018, 54: 4133–4146
Jafarboland M, Farahabadi H B. Optimum design of the stator parameters for noise and vibration reduction in BLDC motor. IET Electric Power Appl, 2018, 12: 1297–1305
Wang S, Hong J, Sun Y, et al. Analysis and reduction of electromagnetic vibration of PM brush DC motors. IEEE Trans Ind Applicat, 2019, 55: 4605–4612
Zuo S, Lin F, Wu X. Noise analysis, calculation, and reduction of external rotor permanent-magnet synchronous motor. IEEE Trans Ind Electron, 2015, 62: 6204–6212
Zhao G, Hua W, Zhu X, et al. The Influence of dummy slots on stator surface-mounted permanent magnet machines. IEEE Trans Magn, 2017, 53: 1–5
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the National Natural Science Foundation of China (Grant Nos. 51991383 and 52025073).
Rights and permissions
About this article
Cite this article
Zhu, S., Zhao, W., Ji, J. et al. Design to reduce electromagnetic vibration in integral-slot SPM machine considering force modulation effect. Sci. China Technol. Sci. 65, 1867–1877 (2022). https://doi.org/10.1007/s11431-022-2089-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-022-2089-y