Abstract
High-efficiency design of a mixed-flow pump has been carried out based on numerical analysis of a three-dimensional viscous flow. For analysis, the Reynolds-averaged Navier-Stokes equations with a shear stress transport turbulence model were discretized by finite-volume approximations. Structured grid system was constructed in the computational domain, which has O-type grids near the blade surfaces and H/J-type grids in other regions. The numerical results were validated with experimental data for the heads and hydraulic efficiencies at different flow coefficients. The hydraulic efficiency at the design flow coefficient was evaluated with variation of the geometric variables, i.e., the area of the discharge and length of the vane in the diffuser. The result has shown that the hydraulic efficiency of a mixed-flow pump at the design condition is improved by the modification of the geometry.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Miner S M. CFD analysis of the first-stage rotor and stator in a two-stage mixed flow pump. Int J Rot Mach, 2005, 1: 23–29
Goto A. Hydrodynamic design of pump diffuser using inverse design method and CFD. ASME Fluids Eng Division, Washington, USA, 1998, FEDSM98-4854
Gulich J F. Impact of three-dimensional phenomena on the design of rotodynamic pumps. Proc Inst Mech Eng, Part C, J Power Energy, 1998, 213: 59–70
Tamaki H, Nakao H, Saito M. The experimental study of matching between centrifugal compressor impeller and diffuser. ASME J Turbomach, 1999, 121: 113–118
Oh H W, Kim K Y. Conceptual design optimization of mixed-flow pump impellers using mean streamline analysis. Proc Inst Mech Eng, Part A, J Power Energy, 2000, 215: 133–138
Zangeneh M, Goto A, Harada H. On the role of three-dimensional inverse design methods in turbomachinery shape optimization. Proc Inst Mech Eng, Part A, J Power Energy, 1998, 213: 27–42
Goto A, Zangeneh M, Takemura T. Suppression of secondary flows in a mixed-flow pump impeller by application of 3-D inverse design method: Part 2-experimental validation. ASME J Turbomach, 1996, 118: 544–551
Menter F R, Kuntz M, Langtry R. Ten years of industrial experience with the SST turbulence model. Turbul Heat Mass Transfer, Begell House Inc, 2003
ANSYS CFX-11.0 Solver Theory. Canonsburg P A: Ansys Inc., 2006
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the Korea Institute of Industrial Technology Evaluation and Planning (ITEP) grant funded by the Ministry of Knowledge Economy (Grant No. 10031771).
Rights and permissions
About this article
Cite this article
Kim, JH., Ahn, HJ. & Kim, KY. High-efficiency design of a mixed-flow pump. Sci. China Ser. E-Technol. Sci. 53, 24–27 (2010). https://doi.org/10.1007/s11431-009-0424-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-009-0424-6