Abstract
The idea of water balance calculations within the landfill is to determine the distribution of water input and output, and finally the volume of leachate generated. The scope of this data is essential for rational planning of water and wastewater management, and designing leachate drainage network and leachate treatment systems. The aim of this study was to assess the possible amounts of leachate generation regarding ten different scenarios of landfill sealing systems. The calculations were performed using the Hydrologic Evaluation of Landfill Performance (HELP) model. It was revealed that the greatest share among the components of water balance in the landfill has precipitation (on average 509 mm in the 5-year period of simulation), together with evapotranspiration (on average 391 mm in the 5-year period of simulation). The study shows that the minimum amount of leachate (797–803 m3/year) occurs when the best placement quality (=5) is regarded for the geomembrane installed in the bottom of the landfill. The maximum leachate generation (830 m3/year) was found for those scenarios in which only three layers of bottom sealing systems were adopted, with the worst placement quality (=1) assigned to geomembranes. The results of this study confirm that the application of multilayer sealing systems has visible impact on the reduction of leachate generation of around 33 m3/year.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
The operation of municipal solid waste (MSW) landfills contributes to the emission of hazardous components that pose a serious threat to human health and the environment (Kumari et al. 2019; Vaverková et al. 2019). The type and intensity of nuisances depend to a large extent on internal factors related to the construction of the landfill, waste properties, or storage technology, as well as external factors related to the environment, including terrain topography or climate conditions (Safari and Baronian 2002; Agamuthu and Long 2007; Yang et al. 2015). The leachate, defined as infiltration water flowing through the landfill body, together with washed out water and dissolved waste components or products of biochemical reaction, constitutes a particular danger to the soil-water environment (Koda and Żakowicz 1998; Costa et al. 2019; Kotowska et al. 2020). It is also a danger to the components of the natural environment due to its toxicity (Vaverková et al. 2017; Przydatek 2019; Jabłońska-Trypuć et al. 2021). Leachate management is considered as one of the most important technological issues of landfill operation (Koda 2012); it is only proper management of leachate that can mitigate its negative impact on the environment. Suitable quantification of leachate generation is crucial for the needs of proper landfill design as a particular basis for the correct selection of parameters of drainage systems or retention reservoirs for temporary storage of the leachate (Yildiz et al. 2004). This is important in planning the amount of leachate that should be used during the recirculation (Abunama et al. 2017). In reference to the above, there is a real need for developing efficient methods of leachate purification and environment-friendly management (Talalaj 2015; Smol et al. 2017; Vaverková et al. 2018; Talalaj et al. 2019; Szymański et al. 2018). Also, the methods of evaluating the impact of leachate (Dąbrowska and Rykala 2021; Podlasek et al. 2021), as well as the methods of environmental risk assessment (Wowkonowicz et al. 2021), should be developed and improved.
In accordance with Polish standards (Regulation of the Minister of the Environment dated 30 April 2013 on landfills; Regulation of the Minister of Climate and the Environment dated 19 March 2021 amending the Regulation on landfills), hazardous waste landfills and non-hazardous waste landfills should be equipped with a leachate drainage system designed to ensure its reliable operation during the exploitation and for at least 30 years from its closure. The system of the landfill leachate collection and management usually consists of several elements, including a drainage net, trenches and reservoirs for leachate retention, components of the recirculation net, a leachate pumping station, discharge pipelines, and technical elements for distributing polluted waters on the surface of the landfill with the possible dilution of highly concentrated leachate for the needs of plant irrigation. The drainage system should be designed to meet hydraulic requirements throughout the entire period of biochemical activity of the landfill. Moreover, a well-designed drainage system is the key element for ensuring geotechnical safety because the location of the leachate depression curve within the landfill body has a significant impact on the global stability of the landfill slopes (Adamcova 2019; Koda et al. 2020). A poorly functioning leachate discharge system can lead to leachate effluence through the landfill slopes, resulting in contamination of the soil and water environment in adjacent areas (Rowe 2011; Koda et al. 2013).
The amount and composition of the leachate, as well as the velocity of its movement within the landfill body, can vary greatly (Wdowczyk and Szymańska-Pulikowska 2019). It depends mainly on the age of the landfill, the degree of waste compaction, and the techniques used during the deposition and forming of the landfill body. Długosz (2012) reported that the amount of leachate generated is impacted also by the terrain conditions, stage of the landfill operation, applied liners, soil features, and the type of vegetation covering the landfill. Komilis and Athiniotou (2014) revealed that a major source of leachate is the moisture of the over-saturated wastes, because monthly leachate amounts were much greater than the monthly precipitation volume infiltrating into the landfill. In semi-arid regions like Sousse in Tunisia, the major sources of leachate are not runoff and precipitation. The studies show that leachate generation is linked to biological activities and influenced by the type, amount, moisture, and compaction of wastes. Evapotranspiration is also an additional essential contributor to leachate generation (Frikha et al. 2017).
Abunama et al. (2017) reported that for the Palestine site conditions, almost 54% of the leachate originates from the initial moisture content of the stored wastes, whereas 31.7% and 14.3% are related to the infiltration and recirculation, respectively. Klimek et al. (2010) indicated that the application of the surface capping system is particularly important for the amount of leachate generated. Those authors revealed that for the annual precipitation of 500 mm, the amount of leachate generated in a landfill without surface sealing is four times greater than in a landfill where surface sealing was applied. In the absence of sufficient sealing of landfill cells, leachate can infiltrate through the soil profile and consequently reach the aquifer where it can freely migrate over considerable distances from the landfill. Therefore, from an engineering point of view, it is important to correctly design drainage systems that take the leachate out of the landfill cells into leachate tanks.
Engineering considerations related to drainage designing are primarily focused on the analytical calculations of water balance. Water balance is affected by several factors, variable during the operation of the landfill and after its closure, related to the technological aspects of landfilling and meteorological parameters, i.e., precipitation, temperature, speed and direction of wind, evapotranspiration, air humidity, inflow of water from external sources, and the properties of landfilled wastes (Koda and Żakowicz 1998). When calculating the water balance at landfill sites, it is usually assumed that 50–60% of rainfall infiltrates through poorly compacted wastes, whereas in well-compacted landfills the range of rainfall infiltration is up to 25%. For comparison, Machajski and Olearczyk (2008) reported that the average amounts of leachate generated in the landfill in relation to the average annual precipitation are 15–25% of the precipitation for heavily compacted wastes with the use of a compactor, and 25–50% of the precipitation for averagely compacted wastes by a dozer.
The simplest approach of estimating leachate generation is using the method in which the only factors taken into consideration are the annual rainfall distribution and the surface area of the landfill (Ibrahim et al. 2017). Yang et al. (2015) pointed out that considering only precipitation data in practical calculations leads to the underestimation of real leachate generation, especially when the moisture of wastes is relatively high. An inappropriate estimation of leachate generation results in an increased water head above the liner system, due to insufficient design capacities of the leachate collection system. Most regulations specify a maximum leachate head as 0.3 m, but a practical example shows that in Chinese conditions the leachate head can be even higher than 10 m (Shu et al. 2019). Subsequently, the high water level in a landfill body may lead potentially to leaching into the surrounding area and cause landfill instability.
Despite the widespread use of numerical modeling techniques worldwide, there are still not enough scientific studies presenting the possibilities of numerical modeling application for the purpose of leachate generation assessments in the Polish site conditions. Therefore, from the scientific point of view, a novelty of the presented approach is to fill this gap of knowledge and indicate whether it would be reliable to predict leachate generation from the landfills located in central Poland using the HELP model. Another important issue raised in the performed analysis is the placement quality of the introduced sealing materials, which could affect the intensity of leachate percolation through the layers of the capping system. The research brings also new insights to the current state of knowledge and could be of a considerable importance as it is focused on the assessment of leachate quantity instead of leachate quality which was more frequently analyzed in the scientific studies. This approach may be considered innovative as so far, the authors have not specified the exact amounts of leachate that can be produced in specific site conditions, instead of that they have rather focused on leachate quality and its impact on the quality of the environment. In reference to this, the main objective of this study was to compute the possible quantity of leachate generated in a model landfill following several scenarios of landfill bottom sealing and cover systems.
Materials and methods
Water balance method
The assumption that all water-infiltrating wastes become leachate is the basic approach for the water balance method (Fenn et al. 1975). The water balance (Fig. 1) can be calculated using several equations.
One of the most frequently equations reported in the literature can be expressed as follows:
where
P is the precipitation, W is the water content in landfilled wastes, H1 is the underground water inflow, Dp is the surface water inflow, Et is the evapotranspiration from the surface and landfill slopes, Ew is the evaporation from the retention reservoirs, ΔR is the effective capabilities of water retention by a landfill body, Sp is the surface outflow, H2 is the underground water outflow, and H3 is the leachate outflow collected by the drainage net.
In landfills isolated with vertical barriers, the water balance can be calculated using the equation:
In computational practice, especially when designing drainage systems, observations and experiments on existing facilities are commonly used; hence, the equations for water balance calculations are often shortened to
where
L is the leachate, P is the precipitation, Sp is the surface outflow, and Et is the evapotranspiration.
Leachate generation can be also effectively predicted using numerical modeling techniques (Grugnaletti et al. 2016). As reported by Min et al. (2010), numerical modeling is especially efficient when determining parameters of engineering liners, leachate collection systems, surface slope, and subsurface drainage. The most commonly used models in the hydrological evaluation of landfills are UNSAT-H (Fayer 2000), HYDRUS-1D (Šimůnek et al. 2005), and HELP (Schroeder et al. 1994). The HELP model was successively applied in engineering practice on landfills in the USA and is more frequently used for the assessment of leachate generation in different landfill sites in the world (Beck-Broichsitter et al. 2018).
HELP model — a theoretical background
HELP is a deterministic model that allows for creating simulations of water flow through landfill layers, both in the case of operating and closed landfills. HELP incorporates modeling of vertical flow with regards to evaporation and infiltration and lateral flow, including runoff and lateral drainage (Mesania and Jennings 1998). The HELP model applies a discrete method of solution, concerning the calculation of the water balance layer by layer. HELP investigates the processes within the landfill, including the flow through the capping system and the waste body as well as the percolation through the bottom liners. The HELP model establishes up to four types of layers, representative for the landfill construction (Table 1).
Input data
The HELP model requires data on climate, soil, vegetation, and design specifying the type and arrangement of the layers (Fig. 2). The weather data includes precipitation, temperature, and solar radiation. The key soil input data are porosity, field capacity, wilting point, and hydraulic conductivity (Table 2). The weather data were set using the weather generator incorporated in the HELP software and the monitoring results obtained from the local meteorological station.
Processes
In this research, the flow of the water into, through, and out of a landfill (with regard to the processes taking place on the surface and below the surface) was considered. All of the processes modeled in the HELP model were in accordance with the mathematical expressions presented by Bauerle (2016). In the performed analysis, the following processes were included:
-
1)
Surface processes: snowmelt, interception or rainfall by vegetation, surface runoff, and evaporation.
-
2)
Subsurface processes: soil-water evaporation, plant transpiration, vertical drainage, liner leakage, and lateral drainage.
In initial calculations, the surface processes were considered in the first stage and then, any water remaining was considered to infiltrate into the landfill body. The runoff was calculated on the basis of precipitation, land use, soil type, and moisture content. The infiltration was considered as the difference between the amount of precipitation, the sum of runoff, surface storage, and surface evaporation. The subsurface processes were taken into account once water had infiltrated into the landfill. Evapotranspiration was regarded as occurring up to the evaporative zone depth, and included the sum of soil-water evaporation and plant transpiration. Evapotranspiration was computed using a modified Penman method (Ritchie 1972). The range of plant transpiration was calculated with regard to the seasonal variation of the leaf area index (LAI). The vertical flow, forced by gravity, was modeled by a water storage and routing approach, which was considered for each segment of the model, where the water flows downward from the top to the bottom of a given segment. In the calculations, the following were included: hydrological properties of each segment, water storage capacity, and infiltration. Leachate recirculation was not modeled. Percolation through the soil barrier was treated as a vertical flow, following Darcy’s law. In the calculations, it was assumed that the barrier soil liners are saturated at all times and leak only when a positive head on the top surface of the liner exists. Thus, it was possible to model that any water moving into a liner can percolate through the liner. For computational purposes, the soil profile was partitioned into subprofiles. The first subprofile was set from the landfill surface to the bottom of the soil layer in the cover system. The second subprofile was regarded from the top of the waste layer to the base of the geomembrane liner system. The third subprofile was set below the second subprofile, to the base of the barrier soil layer in the bottom sealing system. Percolation through the geomembrane was considered as the flow through pinhole defects or as vapor diffusion. Leachate outflow was modeled as lateral drainage assuming a saturated flow.
Modeling scenarios
The input data, including evapotranspiration, precipitation, temperature, and solar radiation, were set specifically for the considered location in central Poland. The evaporative zone depth was set as the average of the minimum and maximum evaporative zone depths for the selected site location. The leaf area index (LAI) was assigned according to the vegetation stage. In the calculations of leachate generation, an important factor was the saturated hydraulic conductivity (ksat) of wastes. The literature findings showed that the permeability of wastes can vary depending on different factors (Reddy et al. 2009), in the range of several orders of magnitude (Table 3).
Several scenarios of MSW landfill construction were considered in calculations of leachate generation (Table 4). In the selected scenarios (1–7), the landfill consisted of 10 layers and a good stand of grass was considered for the vegetation. The geosynthetic layers applied in the bottom part of the landfill had variable placement quality (from 1 to 5). In scenarios 8–10, the landfill consisted of 7 layers. The arrangement of the geosynthetic layers in the bottom part was analogous to scenarios 1–7. The parameters of geomembranes regarded in the selected scenarios are summarized in Table 5.
Statistical analysis
The results of calculations performed in the HELP model were subjected to statistical analysis using Statistica 12 software (StatSoft Inc., Tulsa, OK, USA). Box and whisker plots were prepared to show the range of mean values together with the standard error (SE) and standard deviation (SD) of the leachate generated in each scenario. A correlation matrix was prepared to indicate the relationships between the components of water balance in the landfill. The interpretation of the results was based on the guidelines reported by Rabiej (2018). The strength of the obtained correlation was analyzed after Hinkle et al. (2003).
Results and discussion
In the calculations performed in this study, it was found that the greatest share in the components of water balance in the landfill has precipitation (Fig. 3).
Another factor which contributed to the higher leachate production rates could be the recirculation of the landfill leachate; however, recirculation was not analyzed in this study. It is also expected that leachate generation decreases over time due to stabilization of waste and reduced infiltration of rainwater through the landfill cover. For the analyzed Polish site conditions, it was found that the minimum amount of leachate generated (797.5 m3/year) occurs for scenario 3, in which the best placement quality (=5) is considered for PVC installed in the bottom of the landfill. The maximum leachate generation was revealed in scenarios 8 and 9 (830.4 m3/year) for which only three layers of bottom sealing were defined, and the worst placement quality (=1) was adopted for HDPE and LDPE, respectively. Significant differences in the amount of the leachate generated were found between scenarios 1–7 and 8–10. It was visible that in the case of the application of multilayer sealing systems, the leachate is generated in smaller amounts (difference of 33 m3/year between 10-layer and 7-layer systems) (Fig. 4).
When assessing the impact of placement quality of geomembrane liners on leachate generation, it was observed that in the scenarios 1–7 the leachate is generated in almost the same range (817.8 m3/year) when the placement quality is between 1 and 4. For the best placement quality (=5), there is a significant decrease in the leachate collected (from 14 to 20 m3/year), regarding scenarios 1–7. For scenarios 8–10 it was found that the amount of leachate collected (around 830 m3/year) is almost identical in each case, with no visible impact attributed to the placement quality of geomembrane liners (Fig. 5).
In scenario 1 in which the HDPE geomembrane is applied in the bottom sealing system, the quantity of leachate generated in the landfill ranges between 803 and 818 m3 per year from 1 ha of the landfill area, depending on the placement quality of the HDPE liner. Similar considerations can be attributed to the scenarios in which LDPE, PVC, BR, CPE, CSPE, and EPDM liners were applied.
For the placement quality in the range of 1–4, the leachate generation was close to 818 m3 per year from 1 ha of the landfill area. For the best placement quality (=5) of the geomembrane liner, it was revealed that in the scenarios in which LDPE, PVC, CPE, CSPE, and EPDM are applied, the amount of leachate generated per year from 1 ha of the landfill area was predicted around 797 m3. For cases with the best placement quality (=5) of HDPE and BR liners, the predicted value of leachate generated was 803 m3 per year from 1 ha of the landfill area. In the modeled scenarios with the application of three-layer bottom sealing systems, it was indicated that the volume of leachate generated did not range significantly with regard to the placement quality of the geomembranes used. For the last three of the analyzed cases, it was calculated that the leachate generated is close to 830 m3 per year from 1 ha of the landfill area. Depending on the type of geomembrane and its placement quality, it was proved that there are visible differences in the predicted percolation of leachate through the lowest soil layer applied in the bottom sealing system (Table 6).
It was found that in the case of the best placement quality (=5) of the geomembranes, the volume of percolating leachate is in the range 0.001–0.018 m3/year. The lowest percolation of leachate through the geomembrane is observed for HDPE and LDPE geomembranes, which can be also linked to the lowest hydraulic conductivity (10−15 m/s). In case of the PVC geomembrane, the highest possible percolation of the leachate was calculated, which can also be explained by the highest hydraulic conductivity (10−13 m/s) attributed to this material. The results indicate that reducing the hydraulic conductivity of the material by 1 order of magnitude can reduce the possible percolation of leachate even by up to two times. The results of the performed study have also pointed out that there are significant correlations between the parameters of the water budget balance in the landfill site (Table 7 and Table 8).
For each of the analyzed scenarios it was found that precipitation and evapotranspiration revealed very high or high positive correlation between each other. Depending on the scenario, the correlation between precipitation and the drainage of leachate was moderately or highly positive. This is in line with previous considerations which pointed out that in most scientific studies, precipitation is the main factor determining leachate generation in the landfill. In the current research, evapotranspiration has been also positively correlated with the drainage of leachate. Apart from rainfall, the leachate quantity may be also affected by evapotranspiration (Pazoki and Ghasemzadeh 2020). In each of the analyzed cases this correlation was found to be moderate. The leachate quantity is also influenced by the soil water. In all regarded scenarios, the impact of this factor on the drainage was moderately positive. There were also some observations made regarding the factors that have negligible impact on the leachate drainage. For the analyzed scenarios, the runoff has found to be such kind of factor. Moreover, snow water was described as a parameter with negligible correlation with drainage (with the exception of scenario 4).
The relationship between the leachate quantity and the amount of rainfall has been also studied in different regions of Poland. It was found by Talalaj (2015) that for municipal landfill in the north-eastern part of the country, the correlation between rainfall and the amount of leachate, expressed by the correlation coefficient, was equal to 0.48 (low correlation). Contrary to the above, a strong linear correlation between precipitation and leachate quantity (0.86) was revealed by Čeh et al. (2022) in the research performed on composting technology. Consequently, according to the findings of Abunama et al. (2021), it was proved that rates of leachate generation vary proportionally to the amount of precipitation. Likewise, Ehrig (1983) considered this component as the largest single contributor to the generation of landfill leachate and the most important factor for water input. The approach aiming at the estimation of the annual generation of leachate is found to be very useful when planning future landfill sites (Aziz et al. 2012). Important is also the fact that for climate zones where the annual precipitation is below 400 mm, all precipitation can be lost by evapotranspiration (Christensen et al. 1992). In this study, evapotranspiration accounted for about 71 to 82% of the annual precipitation. Following the results of the 5-year period of the analysis, the runoff accounted for almost 2 to 14% of the amount of precipitation. Other findings also showed that besides precipitation, a major part of the leachate generated comes from the water content in wastes (Frikha et al. 2017).
In the analyses related to the estimation of leachate generation in landfills, there is often a practice to express the leachate production as a percentage of annual precipitation. In this approach the amount of leachate generated is highly dependent on the technique of landfill operation and thus related to the use of specific machinery for waste compaction. Typical equipment to compact wastes includes compactors, dozers, and crawler tractors used under routine operations of the landfill (Owusu-Nimo et al. 2019; Ehrig 1983). It was revealed that the leachate generated in the landfill contributes to 14.8–17.3% of annual precipitation depending on the scenario. This is similar to the findings presented by Ehrig (1983) who stated that in a German landfill compacted with a steel wheel the leachate generated is equal to 15.1% of annual rainfall (652 mm). Ehrig (1983) also found that in a very young landfill the amount of leachate generated is in the range of 3.3–7.2% of annual rainfall (770 mm). When considering the compaction of wastes with the use of a crawler tractor, Ehrig (1983) observed that the percentage of rainfall that contributes to the generation of the leachate is visibly higher. The leachate generated was about 32.3% of annual rainfall (632 mm). Recirculation also enhances leachate generation. It was depicted that in the landfills operating with recirculation and with well-compacted wastes, the leachate generated may be even up to 38% of annual precipitation. Similar findings were reported for the Deir Al Balah landfill in the Gaza Strip (designed with a recirculation system), where the annual leachate contributed to 35.2% of total precipitation (Alslaibi et al. 2013). The research performed by Aziz et al. (2012) at the semi-aerobic landfill in Malaysia indicates that the leachate generated constitutes 9 to 14% of annual rainfall. For the site conditions in Greece, the reported value of leachate generated was 24.2% of the annual rainfall (Tatsi and Zouboulis 2002). In the study performed by Frikha et al. (2017) for the Tunisian site conditions, the leachate calculated using the HELP model was around 30–40% of precipitation. The important outcome of their study conducted in a semi-arid region was also the indication that the significant component of the water budget was evapotranspiration (77% of precipitation) and that in majority the leachate originated from the water content of the wastes. Similar conclusions were drawn by Alslaibi et al. (2013) who stated that half of the leachate discharged from the landfill comes from the moisture of the wastes disposed. Pantini et al. (2014) mentioned that besides rainfall, also water release is a key process of leachate generation, while evapotranspiration and runoff contribute to the leachate generation in 2% and 9%, respectively. Moreover, a significant impact on leachate percolation has the lining system which can cause the reduction of leachate percolation even up to 87%. Alslaibi et al. (2013) revealed that the absence of the recirculation system in the landfill can strengthen the reduction of leachate percolation up to 2.5%. In open landfills, where no upper cover layer was applied, the amount of leachate generated is proportionally correlated with precipitation. Depending on the actual meteorological conditions, the leachate generated can be up to 50–100% of the rainfall (Nas and Nas 2014).
Conclusions
The presented research contributes to the broad field of waste management focused on the assessment of leachate generation for the purpose of proper landfill design and operation. The outcomes of the performed study indicate the possible range of leachate generation from MSW landfills, taking into account various practical solutions of cover and bottom sealing systems, with special attention given to the type of the geomembrane and its placement quality, as well as meteorological conditions of central Poland. It was proved by the performed study that the multilayer sealing system applied in the landfill may affect the reduction of leachate generation by up to 33 m3/year from 1 ha of the landfill. This reduction can be also influenced by the placement quality of the applied geomembrane, with the general conclusion that with the best placement quality (=5) of the material used, the lowest volumes of the leachate are expected. Nevertheless, this is true only for multilayer sealing systems, while when regarding three layers applied in the bottom sealing system, the impact of the placement quality of the geomembrane is not visible. The type and placement quality of the geomembrane should be also regarded in accordance with its hydraulic conductivity, which may significantly affect leachate percolation (even a two times reduction of percolating leachate observed with the reduction of the hydraulic conductivity by one order of magnitude). The adopted methodological approach and described outcomes, discussed with several examples of leachate amount calculations, supplement the existing knowledge on wastewater management, with particular attention given to the amount of leachate that can be generated in different site conditions and different technological solutions adopted for the cover and the bottom sealing systems.
Data availability
Data sharing is not applicable to this article.
References
Abunama T, Othman F, Alslaibi T, Abualqumboz M (2017) Quantifying the generated and percolated leachate through a land-fill’s lining system in Gaza Strip, Palestine. Pol J Environ Stud 26(6):2455–2461. https://doi.org/10.15244/pjoes/73803
Abunama T, Othman F, Ibrahim T, Nilam T (2021) Comparison of landfill leachate generation and pollution potentials in humid and semi-arid climates. Int J Environ Waste Manag 27(1)
Adamcova D (2019) Comparison of technical methods of securing closed landfills in the Czech Republic and Poland. Acta Scientiarum Polonorum – Architectura 18(4), 61-71, https://doi.org/10.22630/ASPA.2019.18.4.46
Agamuthu P, Long KB (2007) Evaluation of landfill cover systems under tropical conditions. International Solid Waste Association. Manuscript Reference 07. Available online: http://www.asociacionversos.org/files/documentos/_130/Tropical-conditions-landfill.pdf (accessed od 8 September 2021)
Alslaibi TM, Abustan I, Mogheir YK, Afifi S (2013) Quantification of leachate discharged to groundwater using the water balance method and the Hydrologic Evaluation of Landfill Performance (HELP) model. Waste Manag Res 31:50–59
Aziz HA, Adlan MN, Amilin K, Yusoff MS, Ramly NH, Umar M (2012) Quantification of leachate generation rate from a semi-aerobic landfill in Malaysia. Environ Eng Manag J 11:1581–1585
Bauerle M (2016) Adapting the Hydrologic Evaluation of Landfill Performance (H. E. L. P) model to the climatic and soil characteristics of Queensland. Masters by Research thesis, Queensland University of Technology
Beck-Broichsitter S, Gerke HH, Horn R (2018) Assessment of leachate production from a municipal solid-waste landfill through water-balance modeling. Geosciences 8:372. https://doi.org/10.3390/geosciences8100372
Christensen TH, Cossu R, Stegmann R (1992) Landfilling of waste: leachate. Elsevier, Barking, UK
Costa AM, Alfaia RGSM, Campos JC (2019) Landfill leachate treatment in Brazil — an overview. J Environ Manag 232:110–116. https://doi.org/10.1016/j.jenvman.2018.11.006
Čeh B, Luskar L, Hladnik A, Trošt Ž, Polanšek J, Naglič B (2022) The quantity and composition of leachate from hop plant biomass during composting process. Appl Sci 12(5):2375
Dąbrowska D, Rykala W (2021) Risk assessment for groundwater: a case study from a municipal landfill in southern Poland. In: Abrunhosa M, Chambel A, Peppoloni S, Chaminé HI (eds) Advances in Geoethics and Groundwater Management : Theory and Practice for a Sustainable Development. Advances in Science, Technology & Innovation (IEREK Interdisciplinary Series for Sustainable Development). Springer, Cham. https://doi.org/10.1007/978-3-030-59320-9_56
Długosz J (2012) Characteristics of the composition and quantity of leachate from municipal landfills — a review. Arch Waste Manag Environ Protect 14(4):19–30 (in Polish)
Ehrig HJ (1983) Quality and quantity of sanitary landfill leachate. Waste Manag Res 1:53–68
Fayer MJ (2000) UNSAT-H Version 3.0: Unsaturated Soil Water and Heat Flow Model: theory, user manual, and examples. Rep 13249. Battelle Pacific Northwest Laboratory, Hanford, Washington
Fellner J (2004) A new method for modeling water flow and water storage in municipal solid waste landfills. Ph.D. Dissertation, Vienna University of Technology, Vienna., 147 p
Fenn DG, Hanley KJ, DeGeare TV (1975) Use of the water balance method for predicting leachate generation from solid waste disposal sites. Environmental Protection Agency
Fleming IR (2011) Indirect measurements of field-scale hydraulic conductivity of waste from two landfill sites. Waste Manag 31(12):2455–2463
Frikha Y, Fellner J, Zairi M (2017) Leachate generation from landfill in a semi-arid climate: a qualitative and quantitative study from Sousse, Tunisia. Waste Manag Res 35:940–948
Grugnaletti M, Pantini S, Verginelli I, Lombardi F (2016) An easy-to-use tool for the evaluation of leachate production at landfill sites. Waste Manag 55:204–219
Ibrahim TNT, Mahmood NZ, Othman F (2017) Estimation of leachate generation from MSW landfills in Selangor. Asian J Microbiol Biotechnol Environ Sci 19(1):43–48
Hinkle DE; Wiersma W; Jurs SG (2003) Applied Statistics for the Behavioral Sciences. 5th ed. Boston: Houghton Mifflin
Jabłońska-Trypuć A; Wydro U; Wołejko E; Pietryczuk A; Cudowski A; Leszczyński J; Rodziewicz J; Janczukowicz W; Butarewicz A (2021) Potential toxicity of leachate from the municipal landfill in view of the possibility of their migration to the environment through infiltration into groundwater. Environ. Geochem. Health 1–16
Jang YS, Kim YW, Lee SI (2002) Hydraulic properties and leachate level analysis of Kimpo metropolitan landfill, Korea. Waste Manag 22(3):261–267
Klimek A; Wysokiński L; Zawadzka-Kos M; Osęka M; Chrząszcz J (2010) Poradnik metodyczny w zakresie PRTR dla składowisk odpadów komunalnych. Ministerstwo Środowiska, Warszawa, (in Polish)
Koda E; Żakowicz S (1998) Physical and hydraulics properties of the MSW for water balance of the landfill. 3rd Intern. Congr. on Environ. Geotech., Lisboa, 1, 217-222
Koda E (2012) Influence of vertical barrier surrounding old sanitary landfill on eliminating transport of pollutants on the basis of numerical modeling and monitoring results. Pol J Environ Stud 21(4):929–935
Koda E, Osiński P, Kołanka T (2013) Flow numerical modeling for efficiency assessment of vertical barriers in landfills. In: “Coupled Phenomena in Environmental Geotechnics”. Editors: M. Manassero, A. Dominijanni, S. Foti, G. Musso. CRC Press/Balkema. London. 693-698
Koda E, Kiersnowska A, Kawalec J, Osiński P (2020) Landfill slope stability improvement incorporating reinforcements in reclamation process applying Observational Method. Appl Sci 10(5):1572. https://doi.org/10.3390/app10051572
Komilis D, Athiniotou A (2014) A water budget model for operating landfills: An application in Greece. Waste Manag Res 32(8):717–725. https://doi.org/10.1177/0734242X14545505
Kotowska U, Kapelewska J, Sawczuk R (2020) Occurrence, removal, and environmental risk of phthalates in wastewaters, land-fill leachates, and groundwater in Poland. Environ Pollut 267. https://doi.org/10.1016/j.envpol.2020.115643
Kumari P, Kaur A, Gupta NC (2019) Extent of groundwater contamination due to leachate migration adjacent to unlined land-fill site of Delhi. Environ Claims J 31(2):160–175. https://doi.org/10.1080/10406026.2018.1543825
Machado SL, Karimpour-Fard M, Shariatmadari N, Carvalho MF, do Nascimento JC (2010) Evaluation of the geotechnical properties of MSW in two Brazilian landfills. Waste Manag 30(12):2579–2591
Machajski J, Olearczyk D (2008) Water balance within a municipal waste disposal site. Infrast Ecol Rural Areas 7:89–100 (in Polish)
Mesania FA, Jennings A (1998) A.A hydraulic barrier design teaching module based on HELP 3.04 and HELP model for Windows v2. 05. Environ Model Softw 13(1):1–24
Min J-E, Kim M, Kim JY, Park I-S, Park J-W (2010) Leachate modeling for a municipal solid waste landfill for upper expansion. KSCE J Civil Eng 14:473–480
Nas S, Nas E (2014) Assessing the impacts of seasonal variations on predicting leachate generation in Gumushane open dump using water balance method. Pol J Environ Stud 23(5):1659–1668
Owusu-Nimo F, Oduro-Kwarteng S, Essandoh H, Wayo F, Shamudeen M (2019) Characteristics and management of land-fill solid waste in Kumasi, Ghana. Sci African 3:e00052
Pantini S, Verginelli I, Lombardi F (2014) A new screening model for leachate production assessment at landfill sites. Int J Environ Sci Technol 11:1503–1516
Pazoki M; Ghasemzadeh R (2020) Leachate quantity. In: Municipal Landfill Leachate Management. Environmental Science and Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-50212-6_4
Podlasek A, Jakimiuk A, Vaverková MD, Koda E (2021) Monitoring and assessment of groundwater quality at landfill sites: selected case studies of Poland and the Czech Republic. Sustainability 13:7769. https://doi.org/10.3390/su13147769
Przydatek G (2019) The analysis of the possibility of using biological tests for assessment of toxicity of leachate from an active municipal landfill Environmental. Toxicol Pharmacol 67:94–101
Rabiej M (2018) Statistical analysis with Statistica and Excel; Helion: Gliwice, Poland. (In Polish)
Reddy KR, Hettiarachchi H, Parakalla N, Gangathulasi J, Bogner J, Lagier T (2009) Hydraulic conductivity of MSW in landfills. J Environ Eng 135(8):677–683
Regulation of the Minister of Environment dated on 30 April 2013 on the landfills. Journal of Law 2013, item 523. Available online: http://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20130000523 (accessed on 6 October 2021)
Regulation of the Minister of Climate and Environment dated on 19 March 2021 amending the ordinance on landfills. Journal of Laws 2021, item 673. Available online: http://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20210000673 (accessed on 6 October 2021)
Ritchie JT (1972) A model for predicting evaporation from a row crop with incomplete cover. Water Resour Res 8(5):1204–1213
Rowe RK (2011) Systems engineering: the design and operation of municipal solid waste landfills to minimize contamination of groundwater. Geosynth Int 18:391–404
Safari E; Baronian C (2002) Modelling temporal variations in leachate quantity generated at Kahrizak landfill. In Proceedings of the International Symposium on Environmental Software (ISMSS) Systems; Lugano, Switzerland, 482–487
Schroeder PR; Aziz N; Lloyd C; Zappi P (1994) The Hydrologic Evaluation of Landfill Performance (HELP) model: user’s guide for version 3; EPA/600/R-94/168a; U.S. Environmental Protection Agency Office of Research and Development, Washington, DC, USA
Shu S, Zhu W, Xu H, Wang S, Fan X, Wu S, Shi J, Song J (2019) Effect of the leachate head on the key pollutant indicator in a municipal solid waste landfill barrier system. J Environ Manag 239:262–270
Smol M, Włodarczyk-Makuła M, Skowron-Grabowska B (2017) PAHs removal from municipal landfill leachate using integrated membrane system aspect of legal regulation. Desalin Water Treat 69:335–343
Szymański K, Janowska B, Iżewska A, Sidelko R, Seibielska I (2018) Method of evaluating the impact of landfill leachate on groundwater quality. Environ Monit Assess 190:415
Šimůnek J; van Genuchten MT; Šejna M (2005) The HYDRUS-1D software package for simulating the one-dimensional movement of water, heat, and multiple solutes in variably-saturated media. International Ground Water Modeling Center, Colorado School of Mines, Golden, CO
Talalaj IA (2015) Release of heavy metals from waste into leachate in active solid waste landfill. Environ Prot Eng 41(1):83–93
Talalaj IA, Biedka P, Bartkowska I (2019) Treatment of landfill leachates with biological pretreatments and reverse osmosis. Environ Chem Lett 17(3):1177–1193. https://doi.org/10.1007/s10311-019-00860-6
Tatsi AA, Zouboulis AI (2002) A field investigation of the quantity and quality of leachate from a municipal solid waste landfill in a Mediterranean climate (Thessaloniki, Greece). AdvEnviron Res 6:207–219
Vaverková MD, Zloch J, Adamcová D, Radziemska M, Vyhnánek T, Trojan V, Winkler J, Đorđević B, Elbl J, Brt-nický M (2017) Landfill leachate effects on germination and seedling growth of hemp cultivars (Cannabis sativa L.). Waste Biomass Valori. https://doi.org/10.1007/s12649-017-0058-z
Vaverková MD, Adamcová D, Radziemska M, Voběrková S, Mazur Z, Zloch J (2018) Assessment and evaluation of heavy metals removal from landfill leachate by Pleurotus ostreatus. Waste Biomass Valor 9(3):503–511. https://doi.org/10.1007/s12649-017-0015-x
Vaverková MD, Zloch J, Adamcová D, Radziemska M, Vyhnánek T, Trojan V, Winkler J, Đorđević B, Elbl J, Brt-nický M (2019) Landfill leachate effects on germination and seedling growth of hemp cultivars (Cannabis sativa L.). Waste Biomass Valor 10:369. https://doi.org/10.1007/s12649-017-0058-z
Wdowczyk A, Szymańska-Pulikowska A (2019) Differences in the composition of leachate from active and non-operational municipal waste landfills in Poland. Water 12(11):3129. https://doi.org/10.3390/w12113129
Wowkonowicz P, Kijeńska M, Koda E (2021) Potential environmental risk assessment of di-2-ethylhexyl phthalate emissions from a municipal solid waste landfill leachate. PeerJ 9:e12163
Yang N, Damgaard A, Kjeldsen P, Shao L-M, He P-J (2015) Quantification of regional leachate variance from municipal solid waste landfills in China. Waste Manag 46:362–372. https://doi.org/10.1016/j.wasman.2015.09.016
Yildiz ED, Unlü K, Rowe RK (2004) Modelling leachate quality and quantity in municipal solid waste landfills. Waste Manag Res 22-2:78–92
Funding
This research was supported by the National Science Centre, Poland, under grant No. 2017/25/N/ST10/00909.
Author information
Authors and Affiliations
Contributions
The author (Anna Podlasek) fully contributed to the study conception and design, data collection, and preparation of the manuscript.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent to participate
The author has participated in the research work and is fully aware of ethical responsibilities.
Consent for publication
The author has agreed for submission of the paper to ESPR and is fully aware of ethical responsibilities.
Competing interests
The author declares no competing interests.
Additional information
Responsible Editor: Guilherme L. Dotto
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Podlasek, A. Modeling leachate generation: practical scenarios for municipal solid waste landfills in Poland. Environ Sci Pollut Res 30, 13256–13269 (2023). https://doi.org/10.1007/s11356-022-23092-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-022-23092-8