Using methods of electron-microscopy and x-ray structural analysis, we have investigated peculiarities of the evolution of the structural-phase state of an alloy of the system Ti–Al–V–Мо during formation of an ultrafine-grained structure by a method combining hot plastic deformation and reversible hydrogenation. It has been shown that the presence in solid solution of 0.15 wt% hydrogen makes it possible to lower by more than a factor of 2 the magnitude of the plastic deformation needed to obtain an ultrafine-grained state in the alloy. We found that during deformation and subsequent degassing of hydrogen from the alloy, such processes as the phase transformations α′′→β→α and β→α′′ and a redistribution of the doping elements take place, facilitating the formation of a lamellar morphology in the grains and preservation of a high level of strength properties of the ultrafine-grained structure.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. Z. Valiev, Y. Estrin, Z. Horita, et al., Mater. Res. Lett., 4, No. 1, 1–21 (2017).
H. Yilmazer, M. Sen, M. Niinomi, et al., RSC Advances, 6, 7426–7430 (2016).
A. É. Svirid, N. N. Kuranova, A. V. Lukyanova, et al., Russ. Phys. J., 61, No. 9, 1681–1686 (2018).
B. B. Straumal, A. R. Kilmametov, Yu. Ivanisenko, et al., Adv. Eng. Mater., 17, No. 12, 1835–1841 (2015).
Ke Hua, Jinshan Li, Hongchao Kou, et al., J. Alloys Compd., 671, 381–388 (2016).
G. P. Grabovetskaya, I. V. Ratochka, I. P. Mishin, et al., Russ. Phys. J., 59, No. 1, 109–115 (2016).
V. E. Panin, V. E. Egorushkin, A. V. Panin, and A. G. Chernyavskii, Fizich. Mezomekh., 19, No. 1, 31–46 (2016).
S. A. Akkuzin, I. Yu. Litovchenko, A. N. Tyumentsov, and V. M. Chernov, Russ. Phys. J., 62, No. 4, 698–704 (2019).
N. A. Popova, E. L. Nikonenko, N. R. Sizonenko, and N. A. Koneva, Russ. Phys. J., 60, No. 4, 615–623 (2017).
H. C. Kou, H. L. Zhang, Y. D. Chu, et al., Acta Metall. Sin., 28, No. 4, 505–513 (2015).
A. A. Il’in, B. A. Kolachev, and V. K. Nosov, Hydrogen Technology of Titanium Alloys [in Russian], National University of Science and Technology “MISIS” Publishing House, Moscow (2002).
Yanxu Zong and Kunyao Wu, Mater. Sci. Eng. A, 703, 430–437 (2017).
I. P. Mishin, G. P. Grabovetskaya, O. N. Zabudchenko, and E. N. Stepanova, Russ. Phys. J., 57, No. 4, 423–428 (2014).
M. V. Mal’tsev and N. I. Kashnikov, Fiz. Met. Metalloved., 45, No. 2, 426–428 (1978).
J. V. Robertson, Eng. Fract. Mech., 68, 671–692 (2001).
E. W. Collings, Physical Metallurgy of Titanium Alloys, American Society for Metals, Cleveland (1984).
Panin V. E. and Egorushkin V. E., Phys. Mesomech., 12, No. 5–6, 204–220 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 8, pp. 21–27, August, 2019.
Rights and permissions
About this article
Cite this article
Grabovetskaya, G.P., Zabudchenko, O.V., Mishin, I.P. et al. Evolution of the Structural-Phase State of a Titanium Alloy of the System Ti–Al–V–Mo During Formation of an Ultrafine-Grained Structure Using Reversible Hydrogenaтion. Russ Phys J 62, 1330–1337 (2019). https://doi.org/10.1007/s11182-019-01851-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-019-01851-4