Abstract
Establishing geochemical background concentrations to distinguish the natural background from anthropogenic concentrations of heavy metals in sediments and soils is necessary to develop guidelines for environmental legislation. Due to the fact that the background concentrations strongly depend on geological characteristics such as mineral composition, grain size distribution and organic matter content, several normalization methods have been developed. Empirical (geochemical), theoretical (statistical) and integrated methods (combining both empirical and theoretical methods) are the main approaches described in literature for determination of geochemical background concentrations. In this review paper, the different approaches as well as the main normalization methods for heavy metal concentrations in sediments and soils will be discussed. Both geochemical background concentrations and added risk level (maximum permissible addition) should be taken into account for setting up legal threshold limits. Moreover, different approaches to evaluate the pollution status of heavy metals in sediments and soils, from Sediment/Soil Quality Guidelines to quantitative indices (Geo-accumulation Index-Igeo, Enrichment Factor-EF, Pollution Load Index-PLI and Risk assessment Code-RAC) will be presented. Although guidelines to establish whether a sediment or soil is polluted or not are generally only related to total metal concentrations, the available/reactive pool i.e., availability/reactivity of metals should be taken into account for sediment/soil pollution assessment.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
One of the definitions of pollution given in literature is “the introduction by man into the environment of substances or energy liable to cause hazards to human health, harm to living resources and ecological systems, damage to structure or amenity, or interference with legitimate use of the environment” (Holdgate 1979). It is apparent from this definition that pollution is caused by anthropogenic activities. Hence, pollution assessment is related to the work of differentiating natural and anthropogenic concentrations in environmental media. Although contamination and pollution are often used in the same context, Chapman (2007) offered a clear definition of these terms: “Contamination is simply the presence of a substance where it should not be or at concentrations above background. Pollution is contamination that results in or can result in adverse biological effects”. It can be seen from this distinction that pollution is a serious case of contamination. Heavy metals are not biodegradable and they occur in “normal” background concentrations in sediments, soils, waters and living organisms. Therefore, it appears difficult to distinguish between natural and anthropogenic concentrations of heavy metals. Related to this, there is also a practical issue with regard to the development of guidelines for environmental legislation because most of the environmental guidelines are based on background values and toxicity levels (Carlon 2007). Consequently, several studies which addressed determination methods as well as terminologies related to background values have been published (e.g., Tack et al. 1997; Matschullat et al. 2000; Reimann and Garrett 2005). Recently, Gałuszka and Migaszewski (2011) addressed the problem of defining and understanding the term “geochemical background”. They also described methods to evaluate the geochemical background as well as methods of evaluation of anthropogenic influence on the environment. Desaules (2012) attempted to evaluate the potential and limitations of a series of soil contamination assessment methods by using a data set from Swiss Soil Monitoring Network. The present article provides a review of the advantages and drawbacks of the existing approaches in determining the geochemical background concentrations and pollution status assessment of heavy metals, both in soils and sediments. For this purpose, it starts with listing the main methods of data normalization and background determination. To address the pollution assessment, sediment/soil quality guidelines and quantitative indices will be discussed. Examples of studies on the determination of background concentrations and pollution levels of heavy metals in soils and sediments are numerous, and discussing all these studies is not the purpose of the present review article. However, for each method, reference will be made to some (recent) examples from literature.
Prior to discussing the existing approaches in determining the geochemical background concentrations and pollution status assessment of heavy metals in soils and sediments, it is necessary to provide a brief explanation of used terminologies.
The term “heavy metal” refers to metals with a specific density greater than 4 or 5 g/cm3, but this also includes the lanthanides and actinides. However, many different definitions have been proposed-some based on density, some on atomic number or atomic weight, and some on chemical properties or toxicity (Duffus 2002). Although a lot of controversy exists about the use of the term ‘heavy metals’ and some authors refer it as “a meaningless or “a poor scientific term” (Duffus 2002; Chapman 2012), it is widely used to indicate transition metals, that are of environmental concern (Batley 2012). In environmental sciences, “heavy metals” usually refers to trace metals which potentially cause harmful effects, including Cd, Co, Cr, Cu, Hg, Ni, Pb, Zn, while As is considered to be a metalloid (Alexander and Fairbridge 1999; US EPA 2000).
There are also many definitions of geochemical background (or natural background) concentration of an element documented in literature (e.g., Hawkes and Webb 1962; Pfannkuch 1990; Porteous 1996; Tack et al. 1997; Matschullat et al. 2000). Reviewing the terminologies and definitions proposed for geochemical background concentrations is not subjected in this article, but it must be clearly defined in which context the term is used here. The approaches to derive this term differ between exploration geochemistry, where it was originally defined and environmental sciences where it has been applied widely since the last decades of the twentieth century (Reimann and Garrett 2005; Reimann et al. 2005). As a consequence, the term “geochemical background” also has a different meaning in exploration geochemistry compared to environmental sciences. It was pointed by Gałuszka and Migaszewski (2011) that the concept of geochemical background is important in exploration geochemistry for searching new mineral ores whereas in environmental sciences it is used to detect anthropogenic influences on the environment. In the present article, geochemical background concentration is defined as the element concentration reflecting natural processes and thus not influenced by human activities (Matschullat et al. 2000) which is in agreement with the definition of Gałuszka (2007) for geochemical background from the environmental science point of view. The differentiation between natural and anthropogenic origin of heavy metals is a relative measure (Matschullat et al. 2000), which is also determined by, for example, the composition of the parent material. The geochemical background concentration allows the distinction of polluted areas from unpolluted ones, and is useful for assessing the extent of human activities and the fate (mobilization, migration, and deposition/uptake of substances in the environment) of elements (Gałuszka 2007). Furthermore, it also allows recognizing areas with higher local background because of the occurrence of mineralization.
According to Reimann et al. (2005), Reimann and Garrett (2005) and Gałuszka and Migaszewski (2011) the terms “threshold value” and “baseline” are often used in equivalency to “geochemical background” even though this has been criticized due to the different meaning. “Threshold” indicates the outer limit of background variation (Garrett 1991) while “baseline” refers to the present concentration in order to be able to quantify future concentration changes (Reimann and Garrett 2005).
Soils and sediments are two different materials. Soil is defined as “a natural body consisting of layered soil horizons) that are primarily composed of minerals which differ from their parent materials in their texture, structure, consistency, color, chemical, biological and other characteristics. It is the unconsolidated or loose covering of fine rock particles that covers the surface of the earth” (Birkeland 1999). Sediment is defined as “particles derived from rocks or biological materials that have been transported by a fluid or solid material suspended in or settled from water” (Horowitz 1985).
From an environmental point of view, soil composition is greatly influenced by pedogenic processes and agricultural activities, while alterations in sediment are mainly influenced by weathering, erosion, dredging or re-suspension. On the one hand, soils are usually well aerated. Therefore, the organic matter content is generally <5 %, and the composing minerals mainly consists of oxidized materials such as hydrated oxides of iron and aluminum (Brady and Weil 1999). On the other hand, sediments are often characterized by aerobic as well as anaerobic conditions. In the later case, organic matter tends to accumulate. For instance, wetlands, including estuarine sediments, can contain an organic matter content in excess of 20 % (Luthy et al. 2003). When sediment contains sulfur, anaerobic conditions can result in the precipitation of minerals such as pyrite or other iron sulfide phases (Morse et al. 1987).
However, soil and sediments are similar to a certain extent. They are both solid environmental materials, mainly derived from weathering processes and the decay of organic materials, and situated at the interface between the geosphere, the atmosphere, the biosphere and the hydrosphere, where they represent a major sink for heavy metals released to the environment as the result of anthropogenic activities (Manceau et al. 2002). Although some methods to determine background values and “mobile/available pools” of heavy metals stated in this article are similar for soils and sediments, data interpretation should be done with great care, taking into account the particular context because heavy metals in a different matrix can react differently (Sahuquillo 2003).
2 Methods for data normalization
Heavy metal concentrations are influenced by sediment/soil characteristics such as grain size distribution, organic matter and/or clay content and major element content (Loring 1990). Therefore, both geochemical background determination and pollution assessment should take into account these effects and compensate or normalize for these differences in composition (Aloupi and Angelidis 2001). There are two main methods for normalization, namely based on granulometry and on geochemical characteristics.
2.1 Granulometric methods
According to Loring and Rantala (1992), grain size distribution is an important factor controlling the distribution of trace elements in sediment/soil. Therefore, normalization for the grain size effects is a common method because the trace element content tends to increase with the increase of the finer fraction (Aloupi and Angelidis 2001). Heavy metals show a strong affinity with the clay fraction and its coating formations (e.g., organic matter, iron and manganese oxides) (Roussiez et al. 2005) and generally the coarser fraction (sand-sized fraction) has lower content of heavy metals (Loring and Rantala 1992). Because the separation of the clay size fraction (<2 μm) for analysis is laborious, several authors (e.g., Herut and Sandler 2006) suggested to choose the fraction <20 or <64 μm fraction for use in granulometric normalization.
Besides the method based on heavy metal analysis from the finer fraction, another method using grain size normalization is the method in which the value of a specific heavy metal is calculated by dividing the measured heavy metal concentration to the fine fraction content (Loring and Rantala 1992). It should be noted that normalization based on clay content (<2 μm) and finer-grain content (<63 μm) is not recommended for sediments/soils derived from glacial erosion of igneous and metamorphic rocks (Loring and Rantala 1992; UNEP 1995) because this type of sediments/soils are often heterogeneous in grain size (mixing of rock fragments and minerals of the clay grain size fraction).
However, it has been criticized by Forstner et al. (1989) that normalization using granulometric data is insufficient because samples can be different with respect to their mineralogical characteristics, which is not systematically reflected in differences in grain size distribution. In that case, granulometric distribution cannot explain the variability in trace element concentrations.
2.2 Geochemical methods
Because heavy metals tend to bind to clay minerals, iron and manganese (oxy)hydroxides and organic matter, normalization can be obtained by using one of the factors representatives for these sediment/soil components as a proxy. Geochemical normalization commonly uses a conservative element as a normalizer. Furthermore, the normalizer should be insensitive to inputs from anthropogenic sources and stable to environmental influences such as reduction/oxidation, adsorption/desorption and other diagenetic processes (Schiff and Weisberg 1999).
According to Loring (1990), an element used as normalizer must be a main constituent of the heavy metal carrier and it should reflect the granulometric variations in the samples. Aluminium (Al)-the main constituent of the aluminosilicate fraction, is commonly used as a normalizer (Prohic et al. 1995; Cheevaporn and San Diego-McGlone 1997; Soto-Jiménez and Páez-Osuna 2001; Jokšas et al. 2008; Ho et al. 2010, 2012).
Using Al-normalization is easy, precise and it is feasible to determine Al-concentrations accurately (Herut and Sandler 2006; Ho et al. 2012). Although aluminium is a suitable proxy for grain size in most sediment/soil types, normalization with Al is not valid in sediments/soils with variable feldspar content, neither in metamorphic sediments/soils (Herut and Sandler 2006; UNEP 1995). Certain elements like Hg and Cd can accumulate in organic matter (Loring and Rantala 1992) or in anoxic strata where heavy metals are found to be entrained in secondary sulphidic phases (Baeyens et al. 1991). In those circumstances, Al-normalization is not effective because of a poor or insignificant correlation between heavy metals and Al (Baeyens et al. 1991). Iron (Fe) and organic matter have been used as normalizers if there is no evidence of an anthropogenic source with regard to these components (Aloupi and Angelidis 2001). However, it should be noted that Fe and organic matter content can significantly be affected by early diagenetic processes, or strong redox effects which are frequently observed in estuarine and coastal sediments (Kersten and Förstner 1991). Moreover, changing salinity in an estuarine environment may cause a precipitation of iron and aluminium hydroxides (Görlich et al. 1989) which may interfere with the normalization. Loring (1990) indicated that Li was more effective as a normalizing factor than Al in samples enriched in T-O-T phyllosilicates [two tetrahedral (T) sheets for every octahedral (O) sheet] for sediments derived from the glacial erosion of crystalline rocks.
It should be mentioned that not only the elements above are used for normalization but also other elements have been proposed (e.g., K, Sc, Ga, Zr, Cs, Be, Ti and Si) (Ackermann 1980; Grant and Middleton 1990; Grousset et al. 1995; Herut et al. 1995). However, difficulties in determination of some of these elements prevent them from being used widely as a normalizer.
According to Herut and Sandler (2006), geochemical normalization shows advantages if compared to normalization based on granulometry because it normalizes both for the grain size and the composition variation in samples. The main modes of geochemical normalizations are stated below:
-
1.
By dividing the raw concentration of heavy metals to the concentration of the normalizer. It is applied when the geo-accumulation index (Igeo) or the enrichment factor (EF) is calculated (Prohic et al. 1995, Soto-Jiménez and Páez-Osuna 2001, Jan et al. 2002). These indices are used to determine the pollution status (Igeo) or degree of enrichment (EF) in sediments/soils.
-
2.
By calculating the linear regression equation of a heavy metal concentration versus the normalizer concentration or a ratio of heavy metal concentration and normalizer concentration (Prohic et al. 1995, Covelli and Fontolan 1997, Ho et al. 2010).
-
3.
By calculating the regression line between a heavy metal and normalizer through a pivot point (non-polluted sand is commonly used) and selecting the standard sediment/soil composition (Herut and Sandler 2006).
-
4.
Multi-parameter normalization: using the combination of clay fraction and normalizing elements to build up a multi regression equation with high regression coefficient (Muller-Karulis et al. 2003).
The pitfalls of using a common divisor in normalization of geochemical data are described by van der Weijden (2002). According to this author, normalization using a common divisor can introduce spurious correlation between variables. This effect can be more pronounced when the coefficient of variation of the normalizer is large compared to the coefficient of variation of the other variables. Furthermore, it can destroy the correlation existing before the normalization.
3 Methods to determine geochemical background
Once the geochemical background is determined, the pollution status can more accurately be assessed. On the one hand, several authors (e.g., Matschullat et al. 2000; Reimann and Garrett 2005; Desaules 2012) distinguish two main methods for determination of geochemical background concentrations. These methods are known as statistical (indirect, theoretical) and empirical (direct, geochemical) methods. On the other hand, integrated methods which combine both statistical and empirical methods are mentioned and applied by other authors (Gałuszka 2007; Qi et al. 2010).
3.1 Geochemical methods
Geochemical methods are also called direct methods or empirical methods which relate to the field and laboratory work. These methods refer to the investigation of samples that are unaffected by industrial activities, also often referred to as preindustrial samples. In these geochemical methods, deep core samples or samples collected at a certain distance from anthropogenic pollution sources are used to establish the background levels of heavy metals in the sediments or soils of a target area. Examples of sampling media that can be used to deduce background values are overbank sediments sampled at depth, cave sediments, bore hole samples, etc.… (De Vos et al. 1996; Boviken et al. 1996; Swennen and Van der Sluys 1998; Cappuyns 2004). The sampling of overbank sediments was applied by Swennen and Van der Sluys (1998) in Belgium and Luxembourg to deduce the background concentrations of heavy metals in sediments. Geochemical characteristics like pH, carbon and sulfur content, isotope and dated data are usually required for data interpretation (Matschullat et al. 2000). By collecting various kinds of samples (e.g., stream water, stream sediments, flood plain sediments, soils and humus), the Forum of European Geological Surveys (FOREGS, now EuroGeoSurveys) provided a geochemical baseline map for Europe (Salminen et al. 1998). Overbank sediment in combination with information on sedimentological history and age of samples allow reconstructing the pollution history of a given area (Cappuyns 2004). In this approach, the mean or median values of heavy metals in sediment layers that are assumed to have a pre-industrial origin are used as geochemical background value.
3.2 Statistical methods
These methods determine and eliminate the outliers-which are related to anthropogenic sources-within the data set consisting of element concentrations in soils or sediments. Outliers are mainly indentified based on the calculation of standard deviation, the regression analysis technique (Matschullat et al. 2000) or using the Tukey boxplot method.
According to Reimann et al. (2005) geochemical background concentrations correspond to the values within the range of [mean ± 2 standard deviation (SDEV)] or [median ± 2 maximum absolute standard deviation (MAD)]. This concept comes originally from exploratory geochemistry which defined the outliers as the values falling outside the range [mean ± 2 SDEV] (Hawkes and Webb 1962). From the above mentioned calculation, the exact value of [mean + 2 SDEV] is referred to the upper limit of geochemical background variation and this was suggested as “threshold level” for clean up goal of environmental legislation (Reimann et al. 2005).
Comparing the performance of different outlier detection methods, Matschullat et al. (2000) and Reimann et al. (2005) concluded that for real geochemical data, the simple rule of [mean ± 2 SDEV] is less appropriate compared to the [median ± 2 MAD] and the Tukey boxplot method.
Another method that uses statistical techniques is regression analysis. In this method, a linear regression is performed between the concentrations of an element and one or several conservative factors (fine fraction, Al, Fe, Li…), which are considered as “inert” or not influenced by anthropogenic activities. Data that falls beyond the confidence interval (95 %) are considered as anthropogenic loads while the data that are well-fitted with the linear regression conditions represent the background values (Covelli and Fontolan 1997; Matschullat et al. 2000; Aloupi and Angelidis 2001). It can be deduced from the descriptions above that the geochemical background concentration determined by statistical methods is a range of values and not a single value.
Beside the conventional statistical techniques, other more recently developed geostatitiscal methods (e.g., principle component analysis (PCA), multivariate analysis) are also widely used in determining geochemical background of heavy metals in soils (e.g., Ungaro et al. 2008; Bing et al. 2011) or sediments (Romano et al. 2012). Saby et al. (2009, 2011) performed a multivariate spatial analysis and used a robust geostatistical method based on the method of moments to differentiate between natural background concentrations of Cd, Co, Cr, Cu, Ni, Pb, Tl, Zn in topsoils in France and pollution due to human activities. The authors concluded that soil texture, variations in parent material geology and weathering, and various anthropogenic sources were the main factors controlling the examined trace element distribution and that robust methods are required to explain their variation at the national-scale.
Although statistical methods are associated with several advantages such as the wide selection of different statistical tests, graphical methods and easily available computer programs for data processing (Gałuszka 2007), these methods were criticized because the particular characteristics of geochemical data. Generally, geochemical data from a particular site are strongly influenced by spatial and temporal variability and there is also the uncertainty in sampling, sample preparation and analysis which is not considered in statistical methods for background determination (Rencz et al. 2006). In a review on causes of arsenic enrichment, Paikaray (2012) found that there is a wide variation in As concentrations (from 1 to 200 mg/kg) in soils which depends strongly on the type of minerals occurring in the studied area. These effects might result in the determination of a wrong geochemical background. In addition, the requirement of a large number of data to be able to perform significant statistical tests is not always met in real case situations. With regard to the size of the dataset for derivation of geochemical background, Garrett and Grunsky (2011) recommended that a subset of data in a poly–population dataset should have a minimum size of 30. When multivariate procedures are used, the minimum size of the dataset should be 8 or 9 times the number of elements that are analyzed.
3.3 Integrated method
The combination of statistical and geochemical methods is referred to as “integrated method” (Gałuszka 2007; Gałuszka and Migaszewski 2011). In this method, the samples are collected in pristine areas and the analytical results are subjected to statistical calculations. Non–polluted samples from an area located at a certain distance from the source of pollution or deep core samples can serve as samples from which background values can be derived. With this method, data are less affected by differences in site sampling because of the representativeness of the samples for the study area. Furthermore, data processing is less complex due to the fact that a restricted amount of data is obtained with this method (Gałuszka 2007). This integrated method was supported and applied by several authors (e.g., Tume et al. 2006; Gałuszka 2007; Zhao et al. 2007; Pérez-Sirvent et al. 2009; Qi et al. 2010; Bini et al. 2011). Bini et al. (2011) applied an integrated method to evaluate the background level of heavy metals in soils of Northern Italy and they concluded that statistical methods improve the differentiation between soil groups with different weathering stages and pedogenetic processes. Therefore, the integrated method can also be considered as an effective tool to depict pedogenetic trends in relation to background concentrations of heavy metals. However, identifying a real pristine area, which is a requirement for this integrated method, remains difficult because of the influence of the long–range transport of atmospheric deposition of heavy metals on soils (Pacyna and Pacyna 2001; Peirson and Cawse 1979) and sediments (Injuk et al. 1998).
Advantages and pitfalls of the different methods used to determine the geochemical background are presented in Table 1. The issue of adequate reference materials for the reliable determination of geochemical background has been addressed in detail by Desaules (2012) and will not be discussed in the present manuscript.
4 Pollution assessment methods
A series of pollution assessment procedures have been developed, taking into account the effects of various types of anthropogenic activities such as agriculture, industry, transportation, etc. Besides methods based on total concentrations, some methods are based on the available/reactive pool of an element.
4.1 Methods based on total concentration
4.1.1 Sediment/soil quality guidelines
The simplest way to assess the heavy metal pollution in sediments/soils is using Sediment/Soil Quality Guidelines (SQGs). These guidelines consist of a set of values of heavy metal concentrations that need to be assessed. These values can be considered as the threshold concentrations of heavy metals that cause adverse biological effects. Heavy metal pollution can be assessed simply by comparing the measured concentrations and the concentrations given by SQGs. Generally, these values are not only based on background concentrations but they can also be derived from bioassay tests (Burton 2002; CCME 2002; Carlon 2007).
Ideally, different ecological functions of sediment and soil should result in different sediment/soil quality guidelines. For instance, several aquatic organisms ingest aquatic sediments or particulate detritus or live within the sediment (Luthy et al. 2003). Therefore, sediment quality guidelines are based on an aquatic life protecting approach (CCME 2002; Burton 2002) whereas soil quality guidelines are often based on a land-use dependent approach (Carlon 2007). This is clearly shown by the Canadian case where sediment/soil quality guidelines have been developed by the Canadian Council of Ministers of the Environment (CCME). For sediments, two types of guideline values are defined in the Canadian environmental legislation, namely the ISQG (Interim Sediment Quality Guidelines) and PEL (Probable Effect Level). The ISQG is the more conservative level and the PEL represents “the lower limit of the range of chemical concentrations that are usually or always associated with adverse biological effects” (CCME 2002). Canadian soil quality guidelines are defined for four different types of land use, namely agricultural, residential/parkland, commercial and industrial land use (CCME 2007). In Flanders (Belgium), a similar division in land-use classes has been made to define quality guidelines for soil, but considering “natural areas” as an additional type of land-use. Another perspective is the “added risk approach” in which upper limits for heavy metal concentrations are defined in environmental legislation (Struijs et al. 1997). Desaules (2012) introduced the word “Reference Regulatory Values (RRVs)” as a terminology referring to “trigger values” for soil pollution. According to Carlon (2007), legal threshold limits should be a sum of the geochemical background and the added risk level (like a Maximum Permissible Addition). This is based on the principle of the adaptation of the local system to the local circumstances. It can be deduced from this assumption that only anthropogenic addition of pollutants is considered for causing the risk to the local ecosystem.
In some EU countries (Belgium-Wallonia, Germany, The Netherlands, and Switzerland), soil screening values are classified into three levels related to three different risk assessment levels, namely negligible risk, intermediate risk and unacceptable risk (Carlon 2007; Desaules 2012). In Flanders region (Belgium), the risk levels are also determined by the time when soil pollution was caused. In the case of new pollution (soil pollution caused after 1995), soil clean-up standards refer to unacceptable risk (remediation should take place) while in historical pollution (soil pollution caused before 1995), soil clean-up standards refer to an intermediate risk for which further investigation are required (Carlon 2007).
In recent years, several improvements have been made to achieve a better accuracy for these values. For instance, a correction procedure towards sediment/soil properties (clay and/or organic matter content, pH) has been developed to reduce the effect of the variation in geochemical characteristics between samples (CCME 2002, 2007; Carlon 2007). In the Netherlands, soil quality guidelines are corrected based on clay fraction and organic matter (Spijker 2012), whereas in Belgium (Flanders) pH(KCl), organic matter and clay content are taken into account (VLAREBO 2006).
4.1.2 Statistical relationship between geochemical characteristics
This method has been used widely with statistical tools such as linear regression, factor analysis, principle component analysis and multiple linear regression to identify the background value as well as to assess contamination status (e.g., De Saedeleer et al. 2010; Ho et al. 2010). By using relationships of heavy metals to clay and organic matter content in a data set containing 600 arable soil samples, De Temmerman et al. (2003) identified the contamination of the Northern region of Belgium based on values falling outside the normal range. Isotopic ratios (of Pb, Cd, Cr, Cu and Zn isotopes) are also suggested to be a sensitive tool to distinguish between the geochemical background and anthropogenic fractions of these elements (Church 1993; Church et al. 1999; Wong and Li 2004; Izbicki et al. 2008; Hoefs 2009). However, the existence of ores and biogeochemical processes can affect the results of geochemical and isotopic relationships (Reimann and De Caritat 2005). Although stable isotopes have been considered as a new and sensitive tool compared to conventional techniques to trace anthropogenic heavy metal pollution, there are several limitations regarding this technique (Hoefs 2009). For instance, the Cu isotopic method can be used to trace natural redox processes, but the variations due to the redox processes in a single deposit usually are much larger than the variation between deposits (Hoefs 2009).
Duzgoren-Aydn and Weiss (2008) illustrated the short-coming of using Pb isotopic ratio analyses in distinguishing the sources of Pb contamination by examining three case studies including areas in Pearl River Delta (Southeast China), New York City (USA), and New Jersey (USA). These authors concluded that it is difficult to distinguish between the sources of Pb in areas where Pb isotopic compositions of natural and anthropogenic sources including regional Pb ore deposits are similar or in cases where the sample isotopic ratio is a composite of Pb from different radiogenic sources.
4.1.3 Quantitative indices
Quantitative methods are based on the calculation of environmental quality indices (sediment/soil quality indices). These methods are considered as an effective tool for transforming the raw environmental data into generic information for non specialists. This transformation provides information to decision makers for ranking and prioritizing the contaminated areas for further investigation (Caeiro et al. 2005). The indices discussed below are all used for the evaluation of sediment/soil pollution, except Marine Sediment Pollution Index (MSPI), Sediment Pollution Index (SPI), the Sediment metal Enrichment Index (SEF) and the Neremo soil index.
4.1.3.1 Geo–Accumulation Index (Igeo)
The Geo-accumulation Index (Igeo) proposed by Müller (1969) allows to identify and classify the pollution status of sediments/soils into seven levels from unpolluted to very polluted. Igeo is calculated by the formula described in Table 2. Igeo is a simple quantitative measure of heavy metal pollution in sediments/soils, but it does not take into account grain-size and natural geochemical variability owing to the use of a single reference background, and it tends to minimize the degree of pollution because of the numerical factor (1.5) artificially introduced (Covelli and Fontolan 1997).
4.1.3.2 Enrichment factors (EFs)
The enrichment factor is used to assess heavy metal pollution of sediments/soils. The formula to calculate EF is given in Table 2. Normally, shale, continental crust or upper continental crust, sedimentary rock, etc. are often used as reference material. The use of the crust as the reference material has been argued, because the compositions of sampling sites are specific and different from site to site (Reimann and De Caritat 2005). In order to deal with this argument, Abrahim and Parker (2008) suggested the use of local background values (e.g., from a deep sediment layer not affected by pollution) instead of the average crust composition.
This index has been used in many studies (e.g., Covelli and Fontolan 1997; Loska et al. 1997; Rubio et al. 2000; Woitke et al. 2003; Abrahim and Parker 2008; Ho et al. 2010), applying different normalizing elements and using background values determined by different methods. Regardless its wide use, this general method is criticized for its arbitrary “cutoff value” and the assumption of the constancy of heavy metal/reference element ratios in nature (Reimann and De Caritat 2005).
4.1.3.3 The Pollution Load Index
The Pollution Load Index (PLI) was suggested by Tomlinson et al. (1980) to determine the pollution status of heavy metals in sediment/soil of a specific area. Although this index was originally developed for soils, it has also been applied to sediments. This is an integrated index because it covers all studied heavy metals in one index. The advantage of this index is that it is easily understood by non scientists and that it allows comparing the pollution status of different locations because all studied metals are considered together in one index. This index is calculated through the Contamination Factor (CF). CF is the quotient of concentration of a heavy metal in a sample and the concentration of the same heavy metal in a background or reference material. The pollution status of a single heavy metal in the sampling site is assessed by comparing the CF of each heavy metal. Calculation of CF and PLI is described in Table 2.
4.1.3.4 Marine Sediment Pollution Index (MSPI)
The Marine Sediment Pollution Index (MSPI) was proposed by Shin and Lam (2001) and has been applied by many authors (e.g., Praveena et al. 2007; Caeiro et al. 2009). This index is modified from the Water Quality Index which was developed by the Scottish Development Department (1976). After a detailed study using MSPI to demonstrate the usefulness of this index, Shin and Lam (2001) concluded that MSPI can be used by non specialists to more easily transform scientific data and is easier to understand compared to the Sediment Quality Triad provided by Chapman et al. (1997).
Apart from the above mentioned indices, other indices have been developed and applied elsewhere such as the Sediment Pollution Index (SPI) (Singh et al. 2002), the Sediment metal Enrichment Index (SEF) (Caeiro et al. 2005) and the Neremo index (Hong-gui et al. 2012). Because of the limited usage, these indices are not addressed in detail. Brief descriptions of those indices can be found in Table 2. Each index has its own advantages and disadvantages and no single method for assessment of heavy metal pollution came out as the best method. However sediment/soil quality guidelines are helpful in screening heavy metal pollution. Moreover, the calculation of enrichment factors taking into account site-specific local geochemical background concentrations and normalization are simple and useful for the assessment of the degree of pollution because they compensate for the differences in geo–characteristics between samples.
4.2 Methods based on available/reactive pool
Heavy metals can exist in many forms in sediments and soils. In sediments, heavy metals can be present in many forms such as dissolved form (as a free ion in the porewater, or as a complex linked to organic or inorganic compounds), and in suspended forms (as precipitate or adsorbed to organic matter, clay minerals and oxides of Fe, Mn and Al) (Bordas and Bourg 2001). Total concentration cannot be used to predict the response of a receptor organism (van Hullebusch et al. 2005) and the most toxic heavy metal form for an ecosystem is the most labile form (Alloway and Ayres 1997). According to van Hullebusch et al. (2005), the speciation of a heavy metal is important because it determines its mobility which depends on reactivity and solubility of a heavy metal. It can be seen that one of the limitations of the indices presented above (EF, Igeo, PLI and MSPI) is that they do not take into account the differences in speciation of heavy metals in sediments/soils. All the quantitative indices such as EF, Igeo, PLI and MSPI are calculated based on the total heavy metal concentration and this comes with the assumption that all the species of a particular metal possess an equal impact with regard to the ecosystem. To overcome this limitation, and because the direct determination of heavy metal speciation in soils and sediments is still difficult in routine analysis, methods based on the available/reactive fraction which employ chemical extractions have been developed. The sequential extraction proposed by Tessier et al. (1979) is known as a complete but long procedure to extract different target phases in solid environmental samples. Although this extraction procedure was originally developed for sediments, it has also been applied to soils. Moreover, numerous other sequential extraction schemes have been developed since then, often without any consistency (Rao et al. 2008). The Tessier scheme classifies the heavy metals into five fractions: exchangeable, acid-soluble (carbonate bound), reducible (Fe/Mn-oxide bound), oxidizable (organically bound + sulphide bound), residual (residual/silicate). Heavy metals in the exchangeable and acid soluble fractions are considered readily and potentially bioavailable, while the reducible and oxidisable fractions are relatively stable under normal sediment/soil conditions (Filgueiras et al. 2002).
The common assumption about differentiation between anthropogenic enrichments and geochemical sources of most heavy metals in sediments and soils based on methods to determine the available/reactive fraction is that the heavy metals from anthropogenic enrichment are more reactive and as a result potentially more available to human, organisms and plant than the naturally occurring fractions (Filgueiras et al. 2002; Spijker et al. 2011). Therefore, evaluation of the sediment/soil pollution and risk assessment is ideally based on the exchangeable and acid soluble fractions. However, (sequential) chemical extractions do not really reflect the true metal speciations because of the non-selectivity of reagents (Hlavay et al. 2004). For instance, by using X-ray absorption spectroscopy and sequential extractions to examine the true metal speciation in anoxic environments, Peltier et al. (2005) concluded that part of Zn sulphide (known as reducible fraction) was extracted in the exchangeable and carbonate step.
Besides sequential extractions, single extractions are also frequently used to evaluate heavy metal availability in soils and sediments. Perin et al. (1985) proposed a classification in which the availability of heavy metals is assessed by the percentage of metals in the exchangeable and carbonate fraction of the sediment. This classification system was called Risk Assessment Code (RAC). The exchangeable and carbonate fraction are determined by a single extraction with a CH3COOH 0.11 M solution. In the RAC classification, risk is defined in different levels going from zero, to low, medium, high and finally very high risk. This approach gives the indication of a potential risk to the ecosystem because the fraction extracted by the acid acetic solution is considered as the fraction of heavy metals weakly bound in the sediment/soil (Rapth et al. 2009). Therefore, they may easily be released and form a potential threat to the environment. According to Spijker et al. (2011), an extraction with HNO3 0.43 M provides the estimation of anthropogenic enrichment of heavy metals and Spijker (2012) recommended to apply this extraction to get an insight in the ecotoxicological implications of anthropogenic heavy metal enrichments in soils when screening values are exceeded. In a study about background levels of heavy metals in Mediterranean greenhouse soils (Spain), Ramos-Miras et al. (2011) used the ethylene diamine tetraacetic acid (EDTA) extractable fraction as bioavailable index for heavy metals. They also defined the bioavailable background levels for the studied area based on 160 surface soil sample data. The available fraction can be considered as a comparative index for heavy metal mobility and thus also as an indicator for the recent soil pollution history (Massas et al. 2010, Ramos-Miras et al. 2011). However, many different extracting agents are used to determine the “available” fraction, which results in a lack of uniformity in this method. For example, some author use EDTA (Ramos-Miras et al. 2011) while others use diethylene triamine pentaacetic acid (DTPA) as extracting agent (Massas et al. 2010; Roca et al. 2012). Even for one extracting agent like EDTA, there is still a lack of uniformity because different types of EDTA salts are used in different concentrations and at different solid/liquid ratios (Cappuyns 2012). Through comparison of the effectiveness of two complexing agents (EDTA and DTPA) for agricultural soils, Sahuquillo (2003) indicated that EDTA is more suitable for soil with a low carbonate content while DTPA is considered suitable for calcareous soil. In practice, data interpretation should be performed carefully, taking into account the particular context of a specific heavy metal due to the fact that the effectiveness of the extraction not only depends on the extracting procedure but also on heavy metal speciation and the composition of the soil/sediment sample (e.g., carbonate content, pH, CEC, content of Fe (hydr)oxides, etc.). Despite the fact that these extractions cannot directly be related to the bioavailability of elements as well as the true metal speciation, they can provide input data for use in risk assessment models. Additionally, they also offer possibilities to perform a fast screening of the mobilizable pool of elements in soils and sediments (Cappuyns 2012). Rao et al. (2008) proposed to use regional maps which show the distribution of a certain metal fraction (that is, for example, linked to plant availability or leachability) to identify problem areas for further investigations.
Because of diversity of chemical extraction procedures in determining the available/reactive fraction of heavy metals in sediments and soils, it is necessary to agree on a uniform extraction method so that researchers can compare their data. In the framework of harmonization of leaching procedures for risk assessment of trace elements in soils, ammonium-EDTA 0.05 mol/L and CH3COOH 0.43 mol/L were selected as extracting agents by the European Standards, Measurements and Testing program (SMT) for assessment of “potential availability” (Ure 1996). A summary of different methods for pollution assessment is given in Table 2.
5 Conclusions
There is clearly a need to assess the degree and extent of heavy metal pollution accurately and several methods are currently applied to determine whether a soil or sediment is polluted or not. The above mentioned methods indicate the necessity of establishing site-specific geochemical background concentrations for pollution assessment. Establishing the geochemical background plays an important role in unraveling threshold limits for environmental legislation. Threshold limit as a basis for clean-up goal for remediation not only relate to environmental aspects but also financial aspects. Based on the added risk approach, legal threshold limits should be a sum of the geochemical background and the added risk level (like a Maximum Permissible Addition). Since guidelines generally are only related to total metal concentrations instead of the available/reactive pool, availability/reactivity of metals should be taken into account for sediment/soil pollution assessment. Comparing results is not straightforward because evaluation scales are not standardized and because of the diversity of chemical extraction procedures used to determine the available/reactive fraction of heavy metals in sediments and soils.
Also it is clear from this review article that every method for heavy metal pollution assessment has its own advantages and disadvantages. Therefore, no single method for assessment of heavy metal pollution can be recommended, but the selection of a method should be made based on site-specific criteria and the purpose of assessment. The establishment of specific guidelines, indicating which method to use under which circumstances would be a step forward to establish more adequate methods for background determination and pollution assessment.
References
Abrahim GMS, Parker RJ (2008) Assessment of heavy metal enrichment factors and the degree of contamination in marine sediments from Tamaki Estuary, Auckland, New Zealand. Environ Monit Assess 136:227–238
Ackermann F (1980) A procedure for correcting the grain size effect in heavy metal analyses of estuarine and coastal sediments. Environ Technol Lett 1:518–527
Adokoh CK, Obodai EA, Essumang DK, Serfor-Armah Y, Nyarko BJB, Asabere-Ameyaw A (2011) Statistical evaluation of environmental contamination, distribution and source assessment of heavy metals (aluminum, arsenic, cadmium, and mercury) in some lagoons and an estuary along the coastal belt of Ghana. Arch Environ Contam Toxicol 61(3):389–400
Alexander DE, Fairbridge WR (1999) Encyclopedia of environmental science. Kluwer Academic Publishers, Dordrecht, The Netherlands
Alloway BJ, Ayres DC (1997) Chemical principles of environmental pollution. Blackie Academic and Professional, London
Aloupi M, Angelidis MO (2001) Geochemistry of natural and anthropogenic metals in the Coastal sediments of the island of Lesvos, Aegean Sea. Environ Pollut 113(2):211–219
Baeyens W, Panutrakul S, Elskens M, Leermakers M, Navez J, Monteny F (1991) Geochemical processes in muddy and sandy tidal sediments. Geo Lett 11:188–193
Batley GE (2012) “Heavy metal”—a useful term. Integr Environ Assess Manag 8(2):215
Bing H, Wu Y, Sun Z, Yao S (2011) Historical trends of heavy metal contamination and their sources in lacustrine sediment from Xijiu Lake, Taihu Lake Catchment, China. J Environ Sci 23(10):1671–1678
Bini C, Sartori G, Wahsha M, Fontana S (2011) Background levels of trace elements and soil geochemistry at regional level in NE Italy. J Geochem Explor 109(1–3):125–133
Birkeland PW (1999) Soils and geomorphology, 3rd edn. Oxford University Press, New York
Bolviken B, Bogen J, Dematriades A, Devos W, Ebbing J, Hindel R, Langedal M, Locutura J, O’Connor P, Ottensen RT, Pulkkinen E, Salminen R, Schermann P, Swennen R, Van der Sluys J, Volden T (1996) Regional geochemical mapping of Western Europe towards the year 2000. J Geochem Expl 56:141–166
Bordas F, Bourg A (2001) Effect of solid/liquid ratio on the remobilization of Cu, Pb, and Zn from polluted river sediment. Water Air Soil Pollut 128:391–400
Brady NC, Weil RR (1999) The nature and properties of soils, 20th edn. Prentice Hall, Englewood Cliffs
Burton JGA (2002) Sediment quality criteria in use around the world. Limnology 3(2):65–76
Caeiro S, Costa MH, Ramos TB, Fernandes F, Silveira N, Coimbra AP, Medeiros G (2005) Assessing heavy metal contamination in Sado Estuary sediment: an index analysis approach. Ecol Indic 5(2):151–169
Caeiro S, Costa MH, Del Valls A, Repolho T, Gonçalves M, Mosca A, Coimbra AP (2009) Ecological risk assessment of sediment management areas: application to Sado Estuary, Portugal. Ecotoxicology 18(8):1165–1175
Cappuyns V (2004) Heavy metal behavior in overbank sediments and associated soils. Dissertation, KULeuven, Belgium
Cappuyns V (2012) A critical evaluation of single extractions from the SMT program to determine trace element mobility in sediments. Appl Environ Soil Sci 2012:1–15
Carlon C (2007) Derivation methods of soil screening values in Europe. A review and evaluation of national procedures towards harmonisation. European Commission, Joint Research Centre, Ispra, EUR 22805-EN
CCME (Canadian Council of Ministers of the Environment) (2002) Canadian Sediment Quality Guidelines for the protection of aquatic life. http://www.ecy.wa.gov/programs/eap/psamp/BoundaryBay/PSAMP-BBAMP%20documents/Canadian%20guidelines%20for%20water%20quality/SedimentProtAquaticLifeSummaryTables(en).pdf. Accessed 20 Sept 2012
CCME (Canadian Council of Ministers of the Environment) (2007) Canadian soil quality guidelines for the protection of environmental and human health
Chapman PM (2007) Determining when contamination is pollution—weight of evidence determinations for sediments and effluents. Environ Int 33(4):492–501
Chapman PM (2012) ‘‘Heavy metal’’—cacophony, not symphony. Integr Environ Assess Manag 8(2):216
Chapman PM, Hyland J, Ingersoll C, Carr S, Engle V, Green R, Hameedi J, Harmon M (1997) General guidelines for using the sediment quality triad. Mar Pollut Bull 34:368–372
Cheevaporn V, San Diego-McGlone ML (1997) Aluminium normalization of heavy metal data from estuarine and coastal sediments of the Gulf of Thailand. Int J Sci Tech 2(2):37–46
Christophoridis C, Dedepsidis D, Fytianos K (2009) Occurrence and distribution of selected heavy metals in the surface sediments of Thermaikos Gulf, N. Greece. Assessment using pollution indicators. J Hazard Mater 168(2–3):1082–1091
Church SE (1993) Geochemical and lead-isotope data from stream and lake sediments, and cores from the upper Arkansas River drainage: effects of mining at Leadville Colorado on heavy metal concentration in the Arkansas River, United States Geological survey, Open File Report 93–534
Church SE, Alpers CN, Vaughn RB, Briggs PH and Slotton DG (1999) Use of lead isotopes as natural tracers of metal contamination. In: Plumlee GS and Logsdon MJ (eds) The environmental geochemistry of mineral deposits, part A. Processes, techniques, and health issues. Rev Econ Geol 6A, Society of Economic Geologists Littleton, pp 567–583
Covelli S, Fontolan G (1997) Application of a normalization procedure in determining regional geochemical baselines. Environ Geol 30(1/2):34–45
De Saedeleer V, Cappuyns V, De Cooman W, Swennen R (2010) Influence of major elements on heavy metal composition of river sediments. Geol Belg 3:257–268
De Temmerman LDE, Vanongeval L, Boon W, Hoenig M, Geypens M (2003) Heavy metal content of arable soils in northern Belgium. Water Air Soil Pollut 148:61–76
De Vos W, Ebbing J, Hindel R, Schalich J, Swennen R, Van Keer I (1996) Geochemical mapping based on overbank sediments in the heavily industrialized border area of Belgium, Germanny and the Netherlands. J Geochem Expl 56:91–104
Desaules A (2012) Critical evaluation of soil contamination assessment methods for trace metals. Sci Total Environ 426:120–131
Duffus JH (on behalf of IUPAC, Chemistry and Human Health Division, Clinical Chemistry Section, Commission on Toxicology) (2002) “Heavy metals”—a meaningless term?. Pure Appl Chem 74:793–807
Duzgoren-Aydn NS, Weiss AL (2008) Use and abuse of Pb-isotope fingerprinting technique and GIS mapping data to assess lead in environmental studies. Environ Geochem Health 30(6):577–588
Filgueiras AV, Lavilla I, Bendicho C (2002) Chemical sequential extraction for metal partitioning in environmental solid samples. J Environ Monitor 4(6):823–857
Forstner U, Ahlf W, Calmano W (1989) Studies on the transfer of heavy metals between sedimentary phases with a multi-chamber device: combined effects of salinity and redox variation. Mar Chem 28:145–158
Gałuszka A (2007) A review of geochemical background concepts and an example using data from Poland. Environ Geol 52(5):861–870
Gałuszka A, Migaszewski ZM (2011) Geochemical background–an environmental perspective. Miner 42(1):7–17
Garrett RG (1991) The management, analysis and display of exploration geochemical data. Exploration geochemistry workshop, Ottawa Geological Survey of Canada, Open File 2390
Garrett RG and Grunsky EC (2011) Geochemical background—what it is and how it varies. In: Proceedings and recommendations from the Workshop on the role of geochemical data in environmental and human health risk assessment, Halifax, 2010, (ed) Rencz AN and Kettles IM, Geological Survey of Canada, Open File 6645, 1 CD-ROM
Görlich K, Görlich E, Tomala K, Hrynkiewicz A, Hung PQ (1989) 57Fe Mossabauer study of a sediment column in the Gdansk basin, Baltic sea: palaeoenvironmental application. Mar Geo 88:49–69
Grant A, Middleton R (1990) An assessment of metal contamination of sediments in the Humber estuary, U K. Estuar Coast Shelf Sci 31:71–85
Grousset FE, Quetel CR, Thomas B, Donard OFX, Lambert CE, Quillard F, Monaco A (1995) Anthropogenic vs. lithogenic origins of trace elements (As, Cd, Pb, Rb, Sb, Sc, Sn, Zn) in water column particles: northwestern Mediterranean Sea. Mar Chem 48:291–310
Hawkes HE, Webb JS (1962) Geochemistry in mineral exploration. Harper, New York
Herut B and Sandler A (2006) Normalization methods for pollutants in Marine sediments: review and recommendations for the Mediterranean Israel Oceanographic and Limnological Research, IOLR Report, pp 1–23
Herut B, Hornung H, Kress N, Krom MD, Shirav M (1995) Trace metals in sediments at the lower reaches of Mediterranean coastal rivers, Israel. Wat Sci Tech 32:239–246
Hlavay J, Prohaska T, Weisz M, Wenzel WW, Stingeder GJ (2004) Determination of trace elements bound to soils and sediment fractions (IUPAC Technical Report). Pure App Chem 76(2):415–442
Ho HH, Swennen R, Van Damme A (2010) Distribution and contamination status of heavy metals in estuarine sediments near Cua ong harbor, Ha Long bay, Vietnam. Geol Belg 13:37–47
Ho HH, Swennen R, Cappuyns V, Vassilieva E, Tran TV (2012) Necessity of normalization to aluminum to assess the contamination by heavy metals and arsenic in sediments near Haiphong Harbor, Vietnam. J Asian Earth Sci 56:229–239
Hoefs J (2009) Stable Isotope geochemistry. Springer, New York
Holdgate MW (1979) A perspective of environmental pollution. Cambridge University Press, Cambridge
Hong-gui D, Teng-feng G, Ming-hui L, Xu D (2012) Comprehensive assessment model on heavy metal pollution in soil. Int J Electrochem Sci 7:5286–5296
Horowitz J (1985) A primer on trace metal- sediment chemistry. United States Geological survey water-supply paper, pp 72
Injuk J, Van Grieken R, De Leeuw G (1998) Deposition of atmospheric trace elements into the North sea: coastal, ship, platform measurements and model predictions. Atmos Environ 32(17):3011–3025
Izbicki JA, Ball JW, Bullen TD, Sutley SJ (2008) Chromium, chromium isotopes and selected trace elements, western Mojave Desert, USA. Appl Geochem 23:1325–1352
Jan E, Joanna Z, Szymon U, Cees L (2002) Normalisation as a tool for environmental impact studies: the Gulf of Gdansk as a case study. Baltica 15:49–62
Jokšas K, Stakėnienė R, Galkus A, Lagunavičienė L (2008) Metals in bottom sediments of Šventoji Port area (Lithuania). Geology 50(3):143–155
Jumbe A, Nandini N (2009) Heavy metals analysis and sediment quality values in urban Lakes. Am J Environ Sci 5(6):678–687
Kersten M, Förstner U (1991) Geochemical characterization of pollutants mobility in cohesive sediments. Geo Lett 11:184–197
Loring DH (1990) Lithium—a new approach for the granulometric noramalization of trace metal data. Mar Chem 29:155–168
Loring DH, Rantala RTT (1992) Manual for the geochemical analyses of marine sediments and suspended particulate matter. Earth Sci Rev 32:235–283
Loska K, Cebula J, Pelczar J, Wiechula D, Kwapulinski J (1997) Use of Enrichment, and Contamination factors together with Geoaccumulation indexes to evaluate the content of Cd, Cu, and Ni in the Rybnik water reservoir in Poland. Water Air Soil Pollut 93:347–365
Luthy RG, Allen-King RM, Brown SL, Dzombak DA, Fendorf SE, Giesy JP, Hughes JB, Louma SN, Malone LA, Menzie CA, Roberts SM, Ruby GMV, Schultz TW, Smets KBF (2003) Bioavailability of contaminants in soils and sediments: process, tools and applications. The National Academies Press, Washington, p 433
Manceau A, Matthew AM, Nobumichi T (2002) Quantitative speciation of heavy metals in soils and sediments by synchrotron X-ray techniques. Rev Miner Geochem 49:341–428
Massas I, Ehaliotis C, Kalivas D, Panagopoulou G (2010) Concentrations and availability indicators of soil heavy metals; the case of children’s playgrounds in the city of Athens (Greece). Water Air Soil Pollut 212(1–4):51–63
Matschullat J, Ottenstein R, Reimann C (2000) Geochemical background—can we calculate it? Environ Geol 39(9):990–1000
Morse JW, Millero FJ, Cornwell JC, Rickard D (1987) The chemistry of the hydrogen sulfide and iron sulfide systems in natural waters. Earth Sci Rev 24:1–42
Müller G (1969) Index of geoaccumulation in sediments of the Rhine River. Geol J 2:109–118
Muller-Karulis B, Poikane R, Seglins V (2003) Heavy metals in the Ventspils Harbour: normalization based on a multi-parameter dataset. Environ Geol 43:445–456
Pacyna JM, Pacyna EG (2001) An assessment of global and regional emissions of trace metals to the atmosphere from anthropogenic sources worldwide. Environ Rev 9(4):269–298
Paikaray S (2012) Environmental hazards of arsenic associated with black shales: a review on geochemistry, enrichment and leaching mechanism. Rev Environ Sci Biotechnol 11:289–303
Passos EA, Alves JPH, Garcia CAB, Costa AC (2011) Metal fractionation in sediments of the Sergipe River, northeast, Brazil. J Braz Chem Soc 22(5):828–835
Peirson DH, Cawse PA (1979) Trace elements in the atmosphere. Phil Trans R Soc Lond B288:41–49
Peltier E, Dahl AL, Gaillard JF (2005) Metal speciation in anoxic sediments: when sulfides can be construed as oxides. Environ Sci Tech 39(1):311–316
Pérez-Sirvent C, Martínez-Sánchez MJ, García-Lorenzo ML, Molina J, Tudela ML (2009) Geochemical background levels of zinc, cadmium and mercury in anthropically influenced soils located in a semi-arid zone (SE, Spain). Geoderma 148(3–4):307–317
Perin G, Craboledda L, Lucchese M, Cirillo R, Dotta L, Zanetta ML, Oro AA (1985) Heavy metal speciation in the sediments of Northern Adriatic Sea. A new approach for environmental toxicity determination. In: Lakkas TD (ed) Heavy metals in the environment, vol 2. CEP Consultants, Edinburg
Pfannkuch H (1990) Elsevier’s dictionary of environmental hydrogeology. Elsevier, Amsterdam
Porteous A (1996) Dictionary of environmental science and technology, 2nd edn. Wiley, Chichester
Praveena SM, Radojevic M, Abdullah MH (2007) The Assessment of mangrove sediment quality in Mengkabong Lagoon: an index analysis approach. Int J Environ Sci Educ 2(3):60–68
Prohic E, Miko S, Peh Z (1995) Nomarlisation and trace element contamination of soils in a Karstic Polje-An example from the Sinjsko Polje, Croatia. Geol Croat 48(1):67–86
Qi S, Leipe T, Rueckert P, Di Z, Harff J (2010) Geochemical sources, deposition and enrichment of heavy metals in short sediment cores from the Pearl River Estuary, Southern China. J Mar Syst 82:S28–S42
Ramos-Miras JJ, Roca-Perez L, Guzmán-Palomino M, Boluda R, Gil C (2011) Background levels and baseline values of available heavy metals in Mediterranean greenhouse soils (Spain). J Geochem Explor 110(2):186–192
Rao CRM, Sahuquillo A, Lopez Sanchez JF (2008) A review of the different methods applied in environmental geochemistry for single and sequential extraction of trace elements in soils and related materials. Water Air Soil Pollut 189:291–333
Rath P, Panda UC, Bhatta D, Sahu KC (2009) Use of sequential leaching, mineralogy, morphology and multivariate statistical technique for quantifying metal pollution in highly polluted aquatic sediments-a case study: Brahmani and Nandira Rivers, India. J Hazard Mater 163:632–644
Reimann C, De Caritat P (2005) Distinguishing between natural and anthropogenic sources for elements in the environment: regional geochemical surveys versus enrichment factors. Sci Total Environ 337:91–107
Reimann C, Garrett RG (2005) Geochemical background–concept and reality. Sci Total Environ 350(1–3):12–27
Reimann C, Filzmoser P, Garrett RG (2005) Background and threshold: critical comparison of methods of determination. Sci Total Environ 346(1–3):1–16
Rencz AN, Garrett RG, Adcock SW, Spirito WA, Bonham-Carter GF (2006) Geochemical background in soil and till. Geological Survey of Canada, Open File 6645, 1 CD-ROM
Roca N, Pazos MS, Bech J (2012) Background levels of potentially toxic elements in soils: a case study in Catamarca (a semi—arid region in Argentina). Catena 92:55–66
Romano S, Mugnai C, Giuliani S, Nguyen HC, Bellucci L, Dang HN, Capodaglio G, Frignani M (2012) Metals in sediment cores from nine coastal lagoons in Central Vietnam. Am J Environ Sci 8(2):130–142
Roussiez V, Ludwig W, Probst JL, Monaco A (2005) Background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean): an approach based on 133Cs normalization and lead isotope measurements. Environ Pollut 138(1):167–177
Rubio B, Nombela MA, Vilas F (2000) Geochemistry of major and trace elements in sediments of the Ria de Vigo (NW Spain): an assessment of metal pollution. Mar Pollut Bull 40(11):968–980
Saby NP, Thioulouse J, Jolivet CC, Ratié C, Boulonne L, Bispo A, Arrouays D (2009) Multivariate analysis of the spatial patterns of 8 trace elements using the French soil monitoring network data. Sci Total Environ 407(21):5644–5652
Saby NP, Marchant BP, Lark RM, Jolivet CC, Arrouays D (2011) Robust geostatistical prediction of trace elements across France. Geoderma 162(3–4):303–311
Sahuquillo A (2003) Overview of the use of leaching/extraction tests for risk assessment of trace metals in contaminated soils and sediments. Trends Anal Chem 22(3):152–159
Salminen R, Tarvainen T, Demetriades A, Duris M, Fordyce FM, Gregorauskiene V, Kahelin H, Kivisilla J, Klaver G, Klein H, Larson JO, Lis J, Locutura J, Marsina K, Mjartanova H, Mouvet C, O’Connor P, Odor L, Ottonello G, Paukola T, Plant JA, Reimann C, Schermann O, Siewers U, Steenfelt A, Van der Sluys J, De Vivo B, Williams L (1998) FOREGS geochemical mapping field manual. Geological Survey of Finland, Espoo, Guide 47, p 36
Schiff K, Weisberg SB (1999) Iron as a reference element for determining trace metal enrichment in Southern California coastal shelf sediments. Mar Environ Res 48(2):161–176
SDD (1976) Development of a water quality index (Report AR3). Scottish Development Department, Edinburgh
Sekabira K, Origa HO, Basamba TA, Mutumba G, Kakudidi E (2010) Assessment of heavy metal pollution in the urban stream sediments and its tributaries. Int J Environ Sci Tech 7(3):435–446
Shin PK, Lam WK (2001) Development of a marine sediment pollution index. Environ Pollut 113(3):281–291
Singh M, Müller G, Singh IB (2002) Heavy metals in freshly deposited stream sediments of rivers associated with urbanisation of the Ganga plain, India. Water, Air and Soil Pollut 141:35–54
Soto-Jiménez M, Páez-Osuna F (2001) Distribution and normalization of heavy metal concentrations in mangrove and lagoonal sediments from Mazatlán Harbor (SE Gulf of California). Estuar Coast Shelf Sci 53(3):259–274
Spijker J (2012) The Dutch soil type correction: an alternative approach. Natl. Inst. Public Health Environ. (RIVM report 607711005/2012)
Spijker J, Mol G, Posthuma L (2011) Regional ecotoxicological hazards associated with anthropogenic enrichment of heavy metals. Environ Geochem Health 33(4):409–426
Struijs J, Van de Meent D, Peijnenburg WJGM, Van den Hoop MAGT, Crommentuijn T (1997) Added risk approach to derive maximum permissible concentrations for heavy metals: how to take natural background levels into account. Ecotoxicol Environ Saf 37:112–118
Swennen R, Van der Sluys J (1998) Zn, Pb, Cu and As distribution patterns in overbank and medium-order stream sediment samples: their use in exploration and Environmental geochemistry. J Geochem Explor 65(1):27–45
Tack FMG, Verloo MG, Vanmechelen L, Van Ranst E (1997) Baseline concentration levels of trace elements as a function of clay and organic carbon contents in soils in Flanders (Belgium). Sci Total Environ 201(2):113–123
Tessier A, Campbell PGC and Bisson M (1979) Sequential Extraction Procedure for the Speciation of Particulate Trace Metals. Analyt Chem 51(7):844–850
Tomlinson DJ, Wilson JG, Harris CR, Jeffrey DW (1980) Problems in the assessment of heavy metal levels in estuaries and the formation of a pollution index. Helgoland Mar Res 33(1–4):566–575
Tume P, Bech J, Longan L, Tume L, Reverter F, Sepulveda B (2006) Trace elements in natural surface soils in Sant Climent (Catalonia, Spain). Ecol Eng 27(2):145–152
UNEP/IOC/IAEA (1995) Manual for the geochemical analyses of marine sediment and suspended particular matter. Reference methods for marine pollution studies No 63, UNEP 1995
Ungaro F, Ragazzi F, Cappellin R, Giandon P (2008) Arsenic concentration in the soils of the Brenta Plain (Northern Italy): mapping the probability of exceeding contamination thresholds. J Geochem Explor 96(2–3):117–131
Ure AM (1996) Single extraction schemes for soil analysis and related applications. Sci Total Environ 178(1–3):3–10
US EPA (United States Environmental protection Agency) (2000) EPA’s Terms of Environment
van der Weijden CH (2002) Pitfalls of normalization of marine geochemical data using a common divisor. Mar Geol 184:167–187
van Hullebusch ED, Lens PNL, Tabak HH (2005) Developments in bioremediation of soils and sediments polluted with metals and radionuclides. 3. Influence of chemical speciation and bioavailability on contaminants immobilization/mobilization bio-processes. Rev Environ Sci Biotechnol 4(3):185–212
VLAREBO (2006) Vlaams reglement betreffende de bodemsanering. Decree on Soil remediation and Soil protection; ratified by the Flemish government on 27 October 2006
Woitke P, Wellmitz J, Helm D, Kube P, Lepom P, Litheraty P (2003) Analysis and assessment of heavy metal pollution in suspended solids and sediments of the river Danube. Chemosphere 51:633–642
Wong CSC, Li XD (2004) Pb contamination and isotopic composition of urban soils in Hong Kong. Sci Total Environ 319(1–3):185–195
Zhao FJ, McGrath SP, Merrington G (2007) Estimates of ambient background concentrations of trace metals in soils for risk assessment. Environ Pollut 148(1–3):221–229
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dung, T.T.T., Cappuyns, V., Swennen, R. et al. From geochemical background determination to pollution assessment of heavy metals in sediments and soils. Rev Environ Sci Biotechnol 12, 335–353 (2013). https://doi.org/10.1007/s11157-013-9315-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11157-013-9315-1