Highly concentrated ceramic binder suspensions (HCBS) based on silicon nitride are prepared and studied. The main features of physicomechanical properties of specimens based on HCBS with heat treatment are established. The possibility is demonstrated of using HCBS as a binder in the production of refractory material for various purposes.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
I. S. Kainarskii, and É. V. Degtyareva, Carborundum Refractories [in Russian], Metallurgiya, Moscow (1963).
G. G. Gnesin, Silicon Carbide Materials [in Russian], Metallurgiya, Moscow (1977).
l. N. D’yachkova, E. V. Zvonarev, V. M. Shelekhina, et al., “Preparation of silicon carbide materials by reaction sintering,” Inzh.-Fiz. Zh., No. 2, 260–263 (1997).
K. Osami, “New ceramic materials,” Nippon. Kikai Gakkaisi. J. Jap. Soc. Mech. Eng., 85. No. 769, 1398–1405 (1982).
N. Koesake and O. Asua, “High quality ceramic of silicon carbide,” Kagaku Koge. Chem. Hid., 33, No. 11, 977–982 (1982).
I. Kim, M. Mitomo, and H. Hiroshuru, “Grain growth and crack resistance of fine-grained silicon carbide ceramic,” Taikabutsu. Refractories, 78, No. 11, 3145–3148 (1995).
S. Yutaka, N. Takayuki, and W. Fumihiro, “Fabrication of nanograined silicon carbide by ultra-high pressure hot static pressing,” J. Amer. Ceram. Soc., No. 3, 771–773 (1999).
Yu. N. Vil’k and A. P. Garshin, “Some properties of materials based on self-bonded silicon carbide and its application potential,” Ogneupory Tekhn. Keram., No. 7, 11–14 (1996).
L. I. Fedotova, A. G. Rozenblat, and A. I. Rekov, “Change in the microstructure of self-bonded silicon carbide on heating in a vacuum,” Ogneupory, No. 4, 57–59 (1972).
I. S. Kainarskii, É. E. Degtyareva, and I. P. Safronova, “Rheological and technological properties of silicon carbide suspensions,” Ogneupory, No. 12, 27–32 (1974).
I. P. Safronova, É. E. Degtyareva, and I. S. Kainarskii, “rheological and technological properties of silicon carbide suspensions and castings based on them with addition silica and clay,” Ogneupory, No. 1, 45–51 (1975).
I. P. Safronova, É. E. Degtyareva, and I. S. Kainarskii, “Study of the effect of additions on the strength of silicon carbide castings,” Ogneupory, No. 3, 41–44 (1975).
Yu. E. Pivinskii, Ceramic and Refractory Materials. Selected Work, in 2 Vol. Vol. 2 [in Russian], Stroizdat, St Petersburg (2003).
Yu. E. Pivinskii, F. S. Kaplan, and P. B. Dyakin, “Regulation of the physicomechanical properties of HCBS based on silicon carbide,” Physicochemical treatment of lean natural raw material and industrial wastes in preparing heat-resistant materials: Proc. All-Union Conf, Syktivkar (1989).
Yu. E. Pivinskii and P. B. Dyakin, “Rheological and physicochemical properties of HCBS and ceramic concretes in the system Al2O3–SiO2–SiC,” Fundamental studies and new technology in building materials science: Proc. All-Union Conf., Belgorod (1989).
S. V. Zaitsev, I. Yu. Moreva, and E. I. Yevtushenko, “Features of forming nitride and oxide modified films of titanium on a ceramic surface,” XXI All-Russian Meeting on Temperature Resistant Functional Coatings, St. Petersburg, 26 – 28 April, 2010, Admiral, St. Petersburg (2010).
V. A. Doroganov, E. A. Doroganov, N. S. Bel’maz, et al., “Development and study of composite refractory materials based on modified dispersed systems,” Novye Ogneupory, No. 11, 35–41 (2009).
Author information
Authors and Affiliations
Additional information
Translated from Novye Ogneupory, No. 8, pp. 50 – 52, August 2010.
Rights and permissions
About this article
Cite this article
Doroganov, V.A., Trepalina, Y.N. Highly concentrated ceramic binder suspensions based on silicon carbide. Refract Ind Ceram 51, 302–304 (2010). https://doi.org/10.1007/s11148-010-9310-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-010-9310-9