Abstract
The results of the experimental study of mechanical treatment of highly refractory ceramic parts made of various compositions based on silicon nitride are described. The revealed regularities of the surface layer and defect formation have been used to develop a two-stage process for working these parts, which ensures high machining efficiency and a minimum level of surface layer defects. The proposed technology has been used in making cutting plates from nitride ceramics, which has increased their average resistance by 15–20%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. K. Starkov, V. V. Kuzin, V. F. Popov, et al., “Improvement of service parameters of ceramic articles by mechanical and thermal treatment,” in: Machine-Building Industries. Series: Progressive Technologies in Machine Building. Review, Issue 4 [in Russian], VNIITÉMR, Moscow (1989).
V.V. Kuzin, “Technological specifics of diamond grinding of nitride ceramic parts,” Vestn. Mashinostr., No. 1, 37–41 (2004).
G. A. Smirnov, V. P. Bakharev, M. Yu. Kilikov, et al., “A study of diamond finishing of corundum ceramic materials,” Vestn. Mashinostr., No. 9, 56–60 (2001).
P. N. Orlov, A. A. Savelova, et al., Lapping of Precision Machine Parts [in Russian], Mashinostroenie, Moscow (1978).
S. N. Grigor’ev and M. A. Volosova, “Technology of integrated surface strengthening of cutting tools based on oxide-carbide ceramics,” Vestn. Mashinostr., No. 9, 32–36 (2006).
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 8, pp. 19–24, August, 2006.
Rights and permissions
About this article
Cite this article
Kuzin, V.V. Technology for machining high-refractory ceramic parts based on silicon nitride. Refract Ind Ceram 47, 204–208 (2006). https://doi.org/10.1007/s11148-006-0089-7
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11148-006-0089-7