The mechanical properties of porous titanium samples in vacuum sintering are analyzed. The effect of porosity and initial powder size on conductivity, static and dynamic elastic moduli, ultimate strength, and strain to failure is examined for sintering temperatures between 300 and 1200°C. The quality of contact in materials in different structural states is subjected to a comparative analysis.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
E. M. Borisovskaya, V. A. Nazarenko, Yu. N. Podrezov, et al., “Mechanical properties of powder titanium at different production stages. I. Densification curves for titanium powder billets,” Powder Metall. Met. Ceram., 47, No. 7–8, 406–413 (2008).
E. M. Borisovskaya, V. A. Nazarenko, Yu. N. Podrezov, et al., “Mechanical properties of powder titanium at different production stages. II. Mechanical behavior of porous titanium compacts,” Powder Metall. Met. Ceram., 47, No. 9–10, 538–545 (2008).
J. Frenkel, “Viscous flow of crystalline bodies under the action of surface tension,” J. Physics, 9, No. 5, 385–391 (1945).
B. Ya. Pines, “On sintering (in solid phase),” Zh. Teor. Fiz., 16, 737–746 (1946).
Ya. E. Geguzin, Physics of Sintering [in Russian], Nauka, Moscow (1967), p. 360.
V. V. Skorokhod, Rheology-Based Theory of Sintering [in Russian], Naukova Dumka, Kiev (1972).
V. V. Skorokhod and S. M. Solonin, Physical and Metallurgical Fundamentals of Powder Sintering [in Russian], Metallurgiya, Moscow (1984), p. 159.
O. I. Get’man, S. P. Rakitin, and V. V. Skorokhod, “Rheological and thermal activation analyses of the sintering kinetics of tungsten powders,” Powder Metall. Met. Ceram., 23, No. 10, 764–768 (1984).
J. P. Jernot, J. L. Chermant, and M. Coster, “A new model to describe the variation of electrical conductivity in materials sintered in solid phase,” Phys. St. Sol. (A), 74, No. 2, 467–475 (1982).
J. P. Jernot, M. Coster, and F. L. Chermant, “Model to describe the elastic modulus of sintered materials,” Phys. St. Sol. (A), 71, No. 1, 141–147 (1982).
V. V. Skorokhod and I. M. Fedorchenko, “Conductivity of fine mixtures with imperfect contact between particles,” Dop. AN USSR, No. 7, 756–759 (1959).
O. V. Roman, V. V. Skorokhod, and G. R. Fridman, Ultrasonic and Resistometric Inspection in Powder Metallurgy [in Russian], Vyshcha Shkola, Minsk (1989), p. 182.
R. Holm, Electric Contacts Handbook, Springer-Verlag, Berlin (1958).
A. V. Vdovichenko, Yu. N. Podrezov, and V. V. Skorokhod, “Mechanical resonance spectroscopy of interparticle boundaries in high-density iron powder compacts,” Powder Metall. Met. Ceram., 47, No. 5–6, 366–372 (2008).
M. Yu. Bal’shin, Science of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972), p. 335.
S. A. Firstov, Yu. N. Ivashchenko, Yu. N. Podrezov, et al., “Interparticle failure of iron powder materials,” Powder Metall. Met. Ceram., 30, No. 4, 329–335 (1991).
S. A. Firstov, A. N. Demidik, I. I. Ivanova, et al., Structure and Strength of Powder Materials [in Russian], Naukova Dumka, Kiev (1993), p. 175.
G. T. Hahn and A. R. Rosenfield, “Local yielding and extension of a crack under plane stress,” Acta Met., 13, No. 3, 5–35 (1965).
J. Gurland and N. M. Parikh, “Microstructural aspects of the fracture of two-phase alloys,” in: G. Liebowitz (ed.), Fracture—An Advanced Treatise, Vol. 7, Academic Press, New York (1972), pp. 841–878.
G. V. Samsonov (ed.), Properties of Elements, Part 1, Physical Properties [in Russian], Metallurgiya, Moscow (1976), p. 600.
H. J. Frost and M. F. Ashby, Deformation-Mechanism Maps, Pergamon Press, Oxford (1982).
V. K. Pishchak, I. V. Moiseeva, and P. N. Okrainets, “High-temperature strength and physical properties of VT1-0 commercially pure titanium,” Metallofiz. Noveish. Tehnol., 23, No. 9, 1243–1257 (2001).
V. F. Moiseev, A. Yu. Borodyanskaya, A. V. Kotko, and I. V. Moiseeva, “Dislocation structures and mechanical properties of α-titanium between 196 and 850°C,” Metallofiz. Noveish. Tehnol., 19, No. 4, 50–59 (1997).
S. V. Belov, Porous Materials in Mechanical Engineering [in Russian], Mashinostroenie, Moscow (1981), p. 247.
É. S. Karakozov, Solid-Phase Metal Bonding [in Russian], Metallurgiya, Moscow (1976), p. 264.
Yu. L. Krasulin, Solid-Phase Interaction of Metal with Semiconductor [in Russian], Nauka, Moscow (1971), p. 119.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkovaya Metallurgiya, Vol. 48, No. 3–4 (466), pp. 98–111, 2009.
Rights and permissions
About this article
Cite this article
Podrezov, Y.N., Nazarenko, V.A., Vdovichenko, A.V. et al. Mechanical properties of powder titanium at different production stages. III. Contact formation in powder titanium based on examination of mechanical properties in sintering. Powder Metall Met Ceram 48, 201–210 (2009). https://doi.org/10.1007/s11106-009-9111-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-009-9111-1