Abstract
Thermodynamic assessment of the Cu-Sc system was carried out using the CALPHAD method. A set of self-consistent model parameters was obtained with the usage of the information about phases equilibria and thermodynamic. Gibbs energy for the liquid phase was assessed within the framework of the model of ideal associated solution. Optimized model parameters make it possible to reproduce satisfactorily the phase diagram and thermodynamic values. Analysis of the relative thermodynamic stability of supercooled melts and competing crystalline phases let us to predict their glass forming ability by rapid quenching from the liquid state.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M. A. Turchanin and P. G. Agraval, “Thermodynamics of liquid alloys, stable and metastable equilibria in the copper-iron system,” Poroshk. Metall., Nos. 7–8, 34–53 (2001).
M. A. Turchanin, P. G. Agraval, A. N. Fesenko, and A. R. Abdulov, “Thermodynamics of liquid alloys and metastable phase transformations in the copper-titanium system,” Poroshk. Metall., Nos. 5–6, 67–80 (2005).
E. M. Savitsky and V. F. Terekhova, “Etudes des proprietes physique et chimiques d’alliages de terres rares,” Colloq. Int. CNRS, No. 180/1, 47–60 (1970).
M. V. Zakharov, A. M. Zakharov, O. P. Popov, and N. E. Dashevskaya, “Effect of scandium on the properties of copper and some copper alloys,” Izv. Vyssh. Uchebn. Zaved., Tsvetnaya Metallurgiya, No. 4, 117–121 (1970).
V. Ya. Markiv, I. S. Gavrilenko, V. V. Pet’kov, and N. N. Belyavina, “Phase diagrams for the system Sc-(Co, Ni, Cu),” Metallofiz., No. 73, 39–45 (1978).
B. Ya. Kotur, V. O. Derkach, I. S. Dutsyak, and A. Z. Pavlyshyn, “Structure and electrical properties of ScCu4 as bulk alloy and film,” J. Alloys Comp., 238, 81–85 (1996).
P. R. Subramanian, D. E. Laughlin, and D. J. Chakrabarti, “Cu-Sc (copper-scandium),” in: Phase Diagrams of Binary Copper Alloys, ASM, Metals Park, Ohio (1994), pp. 384–387.
P. R. Subrmanian and D. E. Laughlin, “Cu-Re (copper-rare earth),” in: Phase Diagrams of Binary Copper Alloys, ASM, Metals park, Ohio (1994), pp. 343–347.
T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprzak, Binary Alloys Phase Diagrams, 2nd ed., ASM, Metals park, Ohio (1990), 3589 p.
O. P. Naumkin, V. F. Terekhova, and E. M. Savitskii, “Alloys of scandium and their use in technique,” in: Rare Earth Metals and Alloys [in Russian], Nauka, Moscow (1971), pp. 28–34.
H. Okamoto and T. B. Massalski, “Binary alloy phase diagrams requiring further studies,” J. Phase Equil., 15, No. 5, 500–521 (1994).
S. Watanabe and O. J. Kleppa, “Thermochemistry of alloys of transition metals. Part IV. Alloys of copper with scandium, yttrium, lanthanum, and lutetium,” Met. Trans. B, 15B, No. 2, 357–368 (1984).
V. S. Sudavtsova, G. I. Batalin, and L. V. Kalmykov, “Thermodynamic properties of binary alloys of the Cu-(Sc, Y, La) systems,” Izv. Vyssh. Uchebn. Zaved., Tsvetnaya Metallurgiya, No. 6, 98–101 (1985).
Yu. O. Esin, S. E. Demin, and V. V. Litovskii, “Enthalpy of formation of liquid alloys of scandium with manganese, cobalt, nickel, and copper,” Zhurn. Fiz. Khim., 59, No. 1, 223–224 (1985).
M. A. Turchanin, S. V. Porokhnya, and I. V. Nikolaenko, “Calorimetric study of the heat of formation of liquid alloys in the copper-scandium system,” Rasplavy, No. 5, 9–12 (1996).
M. A. Turchanin, “Heats of formation of liquid alloys of copper with rare earth metals,” Proc. 2nd Int.-Sci. Conf. on Engineering and Functional Materials (October 14–16, 1997, Lviv, Ukraine), Lviv (1997), pp. 67–68.
L. F. Yamshchikov, A. B. Shubin, S. P. Raspopin, and A. G. Smirnov, “Thermodynamic properties of intermetallics in the system Sc-Cu,” Metally, No. 3, 204–206 (1992).
L. V. Goncharuk and V. R. Sidorko, “Thermodynamics of interaction of rare earth metals with d-metals. The scandium-copper system,” Proc. 6th Int. School Conf. “Phase diagrams in materials science” (October 14–20, 2001, Kiev, Ukraine), Kiev (2001), p. 91.
P. R. Subramian, D. E. Laughlin, and D. J. Chakrabarti, “The Cu-Sc (copper-scandium) system,” Bull. Alloy Phase Diagrams, 9, No. 3a, 378–382 (1988).
M. A. Turchanin, “Calorimetric study of the heat of formation of liquid alloys of copper with IIIA-and IVA-metals,” Poroshk. Metall., Nos. 5–6, 25–36 (1997).
M. A. Turchanin, I. V. Belokonenko, and P. G. Agraval, “Application of ideal associated solution theory for describing the temperature-composition dependence of thermodynamic properties of binary alloys,” Rasplavy, No. 1, 58–69 (2001).
A. T. Dinsdale, “SGTE data for pure elements,” CALPHAD, 15, No. 4, 317–425 (1991).
M. A. Turchanin and P. G. Agraval, “Modelling of temperature-composition dependence of excess thermodynamic properties of melts with strongly interacting components,” in: Physical Chemistry of Condensed Systems and Interphase Boundaries: Book of Articles [in Ukrainian], Vidav.-Poligraf. Tsentr “ Kievskii Universytet,” Kiev (2003), pp. 58–65.
M. A. Turchanin and P. G. Agraval, “Calculation of metastable phase equilibria with participation of a supercooled liquid in evaluation of the concentration range for amorphization of melts of the system (Co, Ni, Cu)-IVA-metal,” in: Physical Chemistry of Condensed Systems and Interphase Boundaries: Book of Articles [in Ukrainian], Vidav.-Poligraf. Tsentr “Kievskii Universytet,” Kiev (2003), pp. 134–141.
Yu. K. Kovneristyi, É. K. Osipov, and E. A. Trofimova, Physicochemical Bases of Creating Amorphous Metal Alloys [in Russian], Nauka, Moscow (1983), 145 p.
Author information
Authors and Affiliations
Additional information
__________
Translated from Poroshkovaya Metallurgiya, Nos. 3–4(448), pp. 43–55, March–April, 2006.
Rights and permissions
About this article
Cite this article
Turchanin, M.A. Phase equilibria and thermodynamics of binary copper systems with 3d-metals. I. The copper-scandium system. Powder Metall Met Ceram 45, 143–152 (2006). https://doi.org/10.1007/s11106-006-0055-4
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11106-006-0055-4