Abstract
Using a flexible support is an efficient approach to solving the subsynchronous problems in a turbopump. In this paper, nonlinear rotordynamic analysis of a liquid fuel turbopump with a flexible support is presented using a dynamic modeling including two key destabilizing factors, nonlinear hydrodynamic forces induced by seals and internal rotor damping. The methodology of the partitioned direct integration method (PDIM) is described for reducing the computational efforts efficiently. Combining the PDIM and the shooting method, a nonlinear stability analysis of the rotor system is performed effectively. The numerical results, which are in good agreement with test data, indicate that the effects of flexible support stiffness k on the dynamic characteristics and stability of the rotor system are significant. The first critical speed of the rotor system rises as a nonlinear function of k markedly. The second critical speed varies slightly and approximates a linear variation as k increases. The onset speed of instability of the rotor system rises initially and then reduces as k increases. The effect of seal nonlinearities at low k is contrary to that at high k and the effect of seal length on the system stability is more significant than that of seal radius. The results explain the nature of the subsynchronous motion of a turbopump rotor system with flexible support and can be used in the design and operation of a liquid fuel turbopump rotor system to eliminate its rotordynamic problem.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Ek, M.C.: Solution of the subsynchronous whirl problem in the high pressure hydrogen turbomachinery of the space shuttle main engine. In: AIAA/SAE 14th Joint Propulsion Conference, Las Vegas, NV (1978)
Childs, D.W.: The space shuttle main engine high-pressure fuel turbopump rotordynamic instability problem. ASME J. Eng. Power 100(1), 48–57 (1978)
Childs, D.W.: Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis. Wiley, New York (1993)
Ying, G.L.: Vibration analysis of LH2 turbopump test. Missiles Space Veh. 5, 40–46 (1995)
Okayasu, A., Ohta, T., Azuma, T.: Vibration problem in the LE-7 LH2 turbopump. In: SAE, ASME, and ASEE, 26th Joint Propulsion Conference, Orlando, FL (1990)
Chen, L.: Stability analysis of rotor-bearing system using finite element method. Dissertation, the Eleventh Institute of China Ministry of Aerospace Industry (1986)
Zhang, X.L.: Research on the critical speed of liquid hydrogen turbopump rotor system and its subsynchronous motion. Dissertation, Northwestern Polytechnical University (2000)
Black, H.F.: Effects of hydraulic forces in annular pressure seals on the vibration of centrifugal pump rotors. J. Mech. Eng. Sci. 11(4), 206–213 (1969)
Muszynska, A.: A whirl and whip rotor/bearing stability problems. J. Sound Vib. 110(3), 443–462 (1986)
Muszynska, A., Bently, D.E.: Frequency-swept rotating input perturbation techniques and identification of the fluid force models in rotor/bearing/seal systems and fluid handling machines. J. Sound Vib. 143(1), 103–124 (1990)
Ding, Q., Cooper, J.E., Leung, A.Y.T.: Hope bifurcation analysis of a rotor/seal system. J. Sound Vib. 252(5), 817–833 (2002)
Li, S.T., Xu, Q.Y., Zhang, X.L.: Nonlinear stability behaviors of a rotor-labyrinth seal system. Nonlinear Dyn. 47, 321–329 (2007)
Bai, C.Q., Xu, Q.Y., Zhang, X.L.: Nonlinear dynamic stability of liquid hydrogen turbopump rotor-seal system used in rocket engine. J. Xi’an Jiaotong Univ. 39(9), 1016–1020 (2005)
Nicholas, J.C., Whalen, J.K., Franklin, S.D.: Improving critical speed calculations using flexible bearing support FRF compliance data. In: Proceedings of the Turbomachinery Symposium, Texas A&M University, College Station, TX, pp. 69–78 (1986)
Guo, Z.L., Kirk, R.G.: Instability boundary for rotor-hydrodynamic bearing systems, Part 2: Rotor with external flexible damped support. ASME J. Vib. Acoust. 125(4), 423–426 (2003)
Seong, M.J., Hyun, D.K., Suk, H.Y., Jinhan, K.: Rotordynamic analysis of a turbopump with the casing structural flexibility. J. Propuls. Power 24(3), 433–436 (2008)
Qin, W.Y., Zhang, J.F., Ren, X.M.: Response and bifurcation of rotor with squeeze film damper on elastic support. Chaos Solitons Fractals 39(1), 188–195 (2009)
Chang-Jian, C., Chen, C.: Nonlinear analysis of a rub-impact rotor supported by turbulent couple stress fluid film journal bearings under quadratic damping. Nonlinear Dyn. 56(3), 297–314 (2009)
Chang-Jian, C., Chen, C.: Chaotic response and bifurcation analysis of a flexible rotor supported by porous and non-porous bearings with nonlinear suspension. Nonlinear Anal., Real World Appl. 10(2), 1114–1138 (2009)
Nelson, H.D.: A finite rotating shaft element using Timoshenko beam theory. ASME J. Mech. Des. 102, 793–803 (1980)
Gunter, E.J.: The influence of internal friction on the stability of high speed rotors. ASME J. Eng. Ind. 89, 683–692 (1967)
Hashish, E., Sankar, T.S.: Finite element and modal analyses of rotor-bearing systems under stochastic loading conditions. ASME J. Vib. Acous. Stress Reliab. Des. 106, 80–89 (1984)
Childs, D.W.: Dynamic analysis of turbulent annular seals based on Hirs lubrication equation. ASME J. Lubr. Technol. 105(3), 429–436 (1983)
Li, L., Xu, Q.Y., Zhen, T.S.: Partitioned direct integration methods for transient response of nonlinear rotor-bearing systems. J. Vib. Eng. 9(1), 64–68 (1996)
Zhou, J.Q., Zhu, Y.Y.: Nonlinear Vibrations. Xi’an Jioatong University Press, Xi’an (1998)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bai, C., Xu, Q. & Wang, J. Effects of flexible support stiffness on the nonlinear dynamic characteristics and stability of a turbopump rotor system. Nonlinear Dyn 64, 237–252 (2011). https://doi.org/10.1007/s11071-010-9858-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11071-010-9858-4