Abstract
Stability of a two degrees of freedom model of the turning process is considered. An accurate modeling of the surface regeneration shows that the regenerative delay, determined by the combination of the workpiece rotation and the tool vibrations, is in fact state-dependent. For that reason, the mathematical model considered in this paper is a delay-differential equation with state-dependent time delay. In order to study linearized stability of stationary cutting processes, an associated linear system, corresponding to the state-dependent delay equation, is derived. Stability analysis of this linear system is performed analytically.
A comparison between the state-dependent delay model and the previously used constant or time-periodic delay models shows that the incorporation of the state-dependent delay into the model slightly affects the linear stability properties of the system in certain parameter domains.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Tlusty, J., Polacek, A., Danek, C., Spacek, J.: Selbsterregte schwingungen an Werkzeugmaschinen. VEB Verlag Technik, Berlin (1962)
Tobias, S.A.: Machine Tool Vibration. Blackie, London (1965)
Balachandran, B., Zhao, M.X.: A mechanics based model for study of dynamics of milling operations. Meccanica 35(2), 89–109 (2000)
Peigne, G., Paris, H., Brissaud, D., Gouskov, A.: Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness. Int. J. Mach. Tools Manuf. 44(11), 1133–1142 (2004)
Stépán, G.: Retarded dynamical systems. Longman, Harlow (1989)
Altintas, Y., Budak, E.: Analytical prediction of stability lobes in milling. Ann. CIRP 44(1), 357–362 (1995)
Insperger, T., Mann, B.P., Stépán, G., Bayly, P.V.: Stability of up-milling and down-milling, Part 1: Alternative analytical methods. Int. J. Mach. Tools Manuf. 43(1), 25–34 (2003)
Bayly, P.V., Halley, J.E., Mann, B.P., Davies, M.A.: Stability of interrupted cutting by temporal finite element analysis. J. Manuf. Sci. Eng. 125(2), 220–225 (2003)
Faassen, R.P.H., van de Wouw, N., Oosterling, J.A.J., Nijmeijer, H.: Prediction of regenerative chatter by modeling and analysis of high-speed milling. Int. J. Mach. Tools Manuf. 43(14), 1437–1446 (2003)
Szalai, R., Stépán, G.: Stability boundaries of high-speed milling corresponding to period doubling are essentially closed curves. Proceedings of ASME International Mechanical Engineering Conference and Exposition, Washington D.C., USA, paper no. IMECE2003-42122 (2003)
Corpus, W.T., Endres, W.J.: Added stability lobes in machining processes that exhibit periodic time variation – Part 1: An analytical solution. J. Manuf. Sci. Eng. 126(3), 467–474 (2004)
Merdol, S.D., Altintas, Y.: Multi frequency solution of chatter stability for low immersion milling. J. Manuf. Sci. Eng. 126(3), 459–466 (2004)
Gradišek, J., Kalveram, M., Insperger, T., Weinert, K., Stépán, G., Govekar, E., Grabec, I.: On stability prediction for milling. Int. J. Mach. Tools Manuf. 45(7–8), 769–781 (2005)
Long, X.-H., Balachandran, B.: Milling model with variable time delay. Proceedings of the 2004 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, paper no. IMECE2004-59207 (2004)
Long, X.-H., Balachandran, B., Mann, B.P.: Dynamics of milling processes with variable time delay. Nonlinear Dyn., in this issue (2006)
Faassen, R., van de Wouw, N., Oosterling, H., Nijmeijer, H.: Updated tool path modelling with periodic delay for chatter prediction in milling. Fifth EUROMECH Nonlinear Dynamics Conference, ENOC 2005, Eindhoven, The Netherlands, pp. 1080–1089 (2005)
Sexton, J.S., Milne, R.D., Stone, B.J.: A stability analysis of single point machining with varying spindle speed. Appl. Math. Modelling 1, 310–318 (1977)
Jayaram, S., Kapoor, S.G., DeVor, R.E.: Analytical stability analysis of variable spindle speed machining. J. Manuf. Sci. Eng. 122(3), 391–397 (2000)
Insperger, T., Stépán, G.: Stability analysis of turning with periodic spindle speed modulation via semi-discretization. J. Vib. Control 10(12), 1835–1855 (2004)
Insperger, T., Stépán, G.: Semi-discretization method for delayed systems, Int. J. Numer. Methods Eng. 55(5), 503–518 (2002)
Insperger, T., Stépán, G.: Updated semi-discretization method for periodic delay-differential equations with discrete delay, Int. J. Numer. Methods Eng. 61(1), 117–141 (2004)
Győri, I., Hartung, F.: On the exponential stability of a state-dependent delay equation. Acta Sci. Math. 66, 71–84 (2000)
Krisztin, T., Arino, O.: The 2-dimensional attractor of a differential equation with state-dependent delay. J. Dynam. Differ. Equ. 13, 453–522 (2001)
Hartung, F., Turi, J.: Linearized stability in functional-differential equations with state-dependent delays. Proceedings of the conference Dynamical Systems and Differential Equations, added volume of Discrete and Continuous Dynamical Systems, pp. 416–425 (2000)
Luzyanina, T., Engelborghs, K., Roose, D.: Numerical bifurcation analysis of differential equations with state-dependent delay. Int. J. Bifurcation Chaos 11(3), 737–753 (2001)
Hartung, F.: Linearized stability in periodic functional differential equations with state-dependent delays J. Comput. Appl. Math. 174, 201–211 (2005)
Richard, T., Germay, C., Detournay, E.: Self-excited stick-slip oscillations of drill bits. Comptes rendus Mecanique 332(8), 619-626 (2004)
Germay, C., van de Wouw, N., Sepulchure, R., Nijmeijer, H.: Axial stick-slip limit cycling in drill-string dynamics with delay, Fifth EUROMECH Nonlinear Dynamics Conference, ENOC 2005, Eindhoven, The Netherlands pp. 1136-1143 (2005)
Insperger, T., Stépán, G., Hartung, F., Turi, J.: State-dependent regenerative delay in milling processes. in Proceedings of ASME International Design Engineering Technical Conferences, Long Beach CA, (2005), paper no. DETC2005-85282 (2005)
Hartung, F., Turi, J.: On differentiability of solutions with respect to parameters in state-dependent delay equations. J. Differ. Equ. 135(2), 192–237 (1997)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Insperger, T., Stépán, G. & Turi, J. State-dependent delay in regenerative turning processes. Nonlinear Dyn 47, 275–283 (2007). https://doi.org/10.1007/s11071-006-9068-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11071-006-9068-2