Abstract
Aluminum nanoparticles are of significant interest in enhancing the rate of energy release from propellants. One of the major impediments to their use is that bare aluminum is highly reactive, while oxide coated aluminum significantly decreases overall performance. We investigate creating aluminum nanoparticles with a thin carbon coating using either a laser induced plasma or a DC plasma-arc. The carbon coating was created by injecting ethylene (C2H4) directly downstream of the plasma. The elemental composition of the coated aluminum nanoparticles was measured in real time with a recently developed quantitative single particle mass spectrometer (SPMS). We found that the aluminum nanoparticles were coated with a carbon layer of thickness around 1–3 nm.
The thermal and oxidative stability of these particles was determined by passing the aerosols through a heated flow reactor in a carrier flow of either air or argon, and measuring the aluminum, carbon and oxygen content in the particles with the single particle mass spectrometer. We found that below 700°C the coating was stable, but that the coating oxidized above ∼ ∼800°C. In contrast the carbon coating was thermally stable above ∼ ∼900°C. These results indicate that a carbon coating may be a suitable passivating agent.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Aumann C.E., Skofronick G.L., Martin J.A. (1995). Oxidation behavior of aluminum nanopowders, J. Vac. Sci. Technol. B 13(3): 1178–1183
Ivanov, G.V. & F. Tepper 1997. Special Topics in Chemical Propulsion, 4th International Symposium on Special Topics in Chemical Propulsion 636
Higgins K.J., H. Jung, D.B. Kittelson, J.T. Roberts, M.R. Zachariah, (2002). Size-selected Nanoparticle chemistry: Kinetics of soot oxidation J. Phys. Chem. A 106: 96–103
Jouet, R.J., A.D. Warren, D.M. Roseberg, V.J. Bellitto, K. Park & M.R. Zachariah (2005). Surface passivation of bare aluminum nanoparticles using perfluoroalkyl carboxylic acids, Chem. Mater. 17, 2987-2996
Knutson E.O., E.R. Whitby, (1975). Aerosol classification by electric mobility: apparatus, theory, and applications J. Aerosol Sci. 6: 443–451
Lee D. K. Park & M.R. Zachariah 2005. Determination of the size distribution of nanoparticles with single particle mass spectrometry. Aerosol Sci. Technol. 39, 162–169
Liu P., P.J. Ziemann, D.B. Kittelson, P.H. McMurry, (1995). Generating particle beams of controlled dimensions and divergence Aerosol Sci. Technol. 22: 314–324
Mahadevan R., D. Lee, H. Sakurai, M.R. Zachariah, (2002). Measurement of condensed-phase reaction kinetics in the aerosol phase using single particle mass spectrometry J. Phys. Chem. A 106: 11083–11092
Park K., D. Lee, A. Rai, R. Mukherjee & M.R. Zachariah 2005. Size-Resolved kinetic measurements of aluminum nanoparticle oxidation with single particle mass spectrometry. J. Phys. Chem. B 109, 7290–7299
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, K., Rai, A. & Zachariah, M.R. Characterizing the coating and size-resolved oxidative stability of carbon-coated aluminum nanoparticles by single-particle mass-spectrometry. J Nanopart Res 8, 455–464 (2006). https://doi.org/10.1007/s11051-005-9012-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11051-005-9012-2