Brief historical information on the development of measurements of the flow rate and volume of liquids and gases in Russia is presented. The metrological characteristics of the State Standards and the main standard documents are given. The future prospects for the development of the standard base of the Mendeleev All-Russia Research Institute of Metrology are considered.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
State Standard GOST 8.587-2006, GSI. Mass of Petroleum and Petroleum Products. General Requirements and Methods of Making Measurements.
RMG 81-2006, GSI. Metrological Backup of the Metering of Petroleum when It Is Being Transported Along a System of Main Petroleum Pipelines. Basic Conditions.
State Standard GOST 8.477-82, GSI. The State Checking Scheme for Hot-Water Supply Systems. General Technical Conditions.
State Standard GOST 51649-2000, Heat Meters for Hot-Water Supply Systems. General Technical Conditions. 5. State Standard GOST 8.1245-75, GSI. The State Primary Standard and All-Union Checking Scheme for Instruments for Measuring the Volume Flow Rate of a Liquid in the Range from 3·10 –6 to 10 m 3 /sec.
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper is based on the Mendeleev Lectures presented at the Mendeleev All-Russia Research Institute of Metrology (VNIIM, St. Petersburg) on May 20, 2009.
Translated from Izmeritel’naya Tekhnika, No. 3, pp. 30–34, March, 2010.
Rights and permissions
About this article
Cite this article
Gutkin, M.B., Mishustin, V.I. & Chistyakov, Y.A. The metrological backup for measurements of the flow rate and volume of liquids and gases in Russia. Meas Tech 53, 281–287 (2010). https://doi.org/10.1007/s11018-010-9496-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-010-9496-8