Abstract
ZrTiO4 powder are synthesized by a modified sol-gel route via bimetallic diethanol amine complex of zirconium and titanium alkoxides. Samples are cured at 140°C and calcined between 500–800°C. Powders are characterized with XRD, TGA, DTA, SEM and TEM methods. The ZrTiO4 powders are obtained at 650°C from the amorphous form. No identified peaks can be attibuted to other phases, namely, zirconia and titania are not observed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M.Z.C. Hu, E.A. Payzant, K.R. Booth, C.J. Rawn, R.D. Hunt, and L.F. Allard, J. Mater. Sci. 38, 3831 (2003).
A. Bianco, G. Gusmano, R. Freer, and P. Smith, J. Eur. Ceram. Soc. 19, 959 (1999).
M.E. Zorn, D.T. Tompkins, W.A. Zeltner, and M.A. Anderson, Appl. Catal. B:Environmental 23, 1 (1999).
J.L. Lakshmi, N.J. Ihasz, and J.M. Miller, J. Mol. Catal. A: Chemical 165, 199 (2001).
L. Pandolfi, S. Kaciulis, G. Padeletti, A. Cusma, and M. Viticoli, Surf. Interf. Anal. 36, 1159 (2004).
S. Ananta, T. Kontitikul, and T. Tunkasiri, Mater. Lett. 57, 2637 (2003).
H. Ikawa, T. Yamada, K. Kojima, and S. Matsumoto, J. Am. Ceram. Soc. 74, 1459 (1991).
Q. Lu, D. Chen, and X. Jialo, J. Mater. Chem. 13, 1127 (2003).
M. Leoni, M. Viviani, G. Battilana, A.M. Fiorello, and M. Viticoli, J. Eur. Ceram. Soc. 21, 1739 (2001).
L.G. Karakchiev, T.M. Zima, and N.Z. Lyakhov, Inor. Mater. 37, 386 (2001).
E.L. Sham, M.A.G. Aranda, E.M.F. Torres, J.C. Gottifredi, M.M. Lara, and S. Bruque, J. Solid State Chem. 139, 225 (1998).
S. Hirano, Hayashi, and A. Hattori, J. Am. Ceram. Soc. 74, 1320 (1991).
R. Caruso, O de Sanctis, A. Frattini, C. Steren, and R. Gil, Surf. Coat. Techn. 122, 44 (1999).
V. Bornard, P. Papet, and E. Philippot, J. Mater. Sci. Lett. 18, 483 (1999).
S. Komarneni, I.R. Abothu, and V.P. Rao, J. Sol-Gel Sci. Tech. 15, 263 (1999).
G.I. Spijksma, H.J.M. Bouwmeester, D.H.A. Blank, and V.G. Kessler, Inorg. Chem. Commun. 7, 953 (2004).
S.N. Koc, F. Oksuzomer, E. Yasar, S. Akturk, and M.A. Gurkaynak, submitted for publication.
P.R. Lucena, O.D.P. Neto, I.M.G. Santos, A.G. Souza, E. Longo, and J.A. Varela, J. Alloys Comp. 397, 255 (2005).
A. Bianco, M. Paci, and R. Freer, J. Eur. Ceram. Soc. 18, 1235 (1998).