Abstract
Carbon-silica composite films have been fabricated using sol-gel synthesis of silica-carbon precursor composites, followed by carbonization in an inert atmosphere. Four categories of samples were studied. These were the tetraethyl orthosilicate-only (TEOS-only), methyl trimethoxysilane (MTES), acetic acid anhydride (Ac2O) and soot (SOOT) samples. The carbon-silica films, spin-coated on aluminium and steel substrates, have been investigated for selective solar absorber functionality. Optical measurements were performed on these samples to determine solar absorptance and thermal emittance of each. The morphology of the films was studied by electron microscopy. Electron energy-loss spectroscopy (EELS) mapping was used to determine the carbon distribution. An optimum performance of 0.88 for solar absorptance and 0.41 for thermal emittance has been achieved. The sol-gel technique produced films with very flat surfaces and uniform thicknesses in the 1 μm range. The fine structure showed homogeneous mixing of the carbon and silica in the TEOS-only samples while the separate additions of MTES and Ac2O resulted in segregation of composition of the silica and carbon at nano-scale. The addition of 20 wt% MTES or 15 wt% Ac2O to the TEOS-only sols also helped to reduce the cracks in the TEOS-only samples. The addition of soot in place of the carbon precursor did not yield a net advantage.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Xiaohu Deng, Yinghong Yue, and Zi Gao, J. Colloid Interface Sci. 206, 52 (1998).
Y.X. Wang, S.H. Tan, D.L. Jiang, and X.Y. Zhang, Carbon 41, 2065 (2003).
Zhi-Guo Shi, Yu-Qi Feng, Li Xu, and Shi-Lu Da, Carbon 41, 2668 (2003).
J. Li, L.S. Chia, N.K. Goh, and S.N. Tan, J. Electroanal. Chem. 460, 234 (1999).
A.J.G. Zarbin, R. Bertholdo, and M.A.F.C. Oliveira, Cabon 40, 2413 (2002).
S. Han, M. Kim, and T. Hyeon, Carbon 41, 1525 (2003).
Y. Matsai, S. Polarz, and M. Antonietti, Adv. Funct. Mater. 12, 197 (2002).
E. Wäckelgård, G.A. Niklasson, and C.G. Granqvist, in Solar Energy: The State of the Art, edited by Gordon Jeffrey (James and James (Science Publishers) Ltd., United Kingdom, 2001). p. 112.
G.A. Niklasson and C.G. Granqvist, in Materials Science for Solar Energy Conversion Systems, edited by C.G. Granqvist (Pergamon Press, Oxford 1991), p. 70s.
M. Farooq and Z.H. Lee, Renewable Energy 28, 1421 (2003).
E. Wäckelgård and G. Hultmark, Solar Energy Mater. 54, 165 (1998).
J. Vince, A.S. Vuk, U.O. Krasovec, B. Orel, M. Kohl, and M. Heck, Sol. Energy Mater. 79, 313 (2003).
T. Boström, E. Wäckelgård, and G. Westin, Solar Energy 74, 497 (2003).
N Etherden, T. Tesfamichael, G. Niklasson, and E. Wäckelgård, J. Phys. D: Appl. Phys. 37, 1 (2004).
E.M. Rabinovich, in Sol-Gel Optics: Processing and Applications, edited by L.C. Klein (Kluwer Academic Publishers, Boston, 1994) chapter 1.
J. Livage, F. Babonneau, and C. Sanchez, in Sol-Gel Optics: Processing and Applications, edited by L.C. Klein (Kluwer Academic Publishers, Boston, 1994) Chapter 2.
W. Que, et. al., Thin Solid Films 359, 177 (2000).
A.V. Rao, R.R. Kalesh, and G.M. Pajonk, J. Mater. Sci. 38, 4407 (2003).
I.M. Thomas, in Sol-Gel Optics: Processing and Applications, edited by L.C. Klein (Kluwer Academic Publishers, Boston, 1994) Chapter 6.
C.J. Brinker and G.W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing (Academic Press, San Diego, 1990) Chapter 8.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Katumba, G., Lu, J., Olumekor, L. et al. Low Cost Selective Solar Absorber Coatings: Characteristics of Carbon-In-Silica Synthesized with Sol-Gel Technique. J Sol-Gel Sci Technol 36, 33–43 (2005). https://doi.org/10.1007/s10971-005-4793-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10971-005-4793-4