Abstract
The present paper deals with the analysis of a non-oxide type of vertical-cavity surface-emitting laser (VCSEL) for operation at 850 nm. The modeling and characterization of the VCSEL is presented in the context of design considerations. Efforts are made to emphasize the behavioral features of the proposed VCSEL, in view of the analytical investigation, which has been performed through a series of simulations for various relevant parameters that are vital for the determination of the VCSEL characteristics. Some of these parameters are the intensity and refractive-index distributions, gain response, spontaneous emission, material gain variations, etc. The results obtained are compared with the oxide-confined VCSEL. It is observed that the proposed model of the VCSEL is suitable at the operating wavelength of 850 nm.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
P. K. Choudhury and O. N. Singh, “Some multilayered and other unconventional lightguides,” in: O. N. Singh and A. Lakhtakia (eds.), Electromagnetic Fields in Unconventional Structures and materials, Wiley, USA (2000), p. 289.
D. L. Huffaker, D. G. Deppe, K. Kumar, and T. J. Rogers, Appl. Phys. Lett., 65, 97 (1994).
T. Cho, H. Kim, Y. Kwon, and S. Hong, Appl. Phys. Lett., 68, 2183 (1996).
J. Y. Law and G. P. Agrawal, IEEE J. Quantum Electron., 33, 462 (1997).
J. Piprek, P. Abraham, and J. E. Bowers, Appl. Phys. Lett., 74, 489 (1999).
C. Degen, I. Fischer, and W. Elsäßer, Opt. Express, 5, 38 (1999).
J. Piprek, P. Abraham, and J.E. Bowers, IEEE J. Quantum Electron., 36, 366 (2000).
M. Peeters, G. Verschaffelt, H. Thienpont, et al., Opt. Express, 13, 9337 (2005).
T. Gensty, K. Becker, I. Fischer, et al., Phys. Rev. Lett., 94, 233901 (2005).
A. Tabaka, M. Peil, M. Sciamanna, et al., Phys. Rev. A, 73, 013810 (2006).
C. W. Wilmsen, Vertical-Cavity Surface-Emitting Lasers: Design, Fabrication, Characterization, and Applications, Cambridge University Press (1999).
C. Gimkiewicz, M. Moser, S. Obi, et al., Proc. SPIE, 5453, 13 (2004).
P. Damberg, L. Erdmann, R. Bierbaum, et al., Microsystem Technol., 6, 41 (1999).
A. N. Al-Omari and K. L. Lear, Proc. SPIE, 5364, 73 (2004).
Y. S. Chang, H. C. Kuo, F. I. Lai, et al., Proc. SPIE, 5364, 221 (2004).
F. H. Peters and M. H. MacDougal, IEEE Photon. Technol. Lett., 13, 645 (2001).
S. M. Mitani, M. S. Alias, and P. K. Choudhury, “A novel design and characterization of oxide-confined 850-nm VCSEL,” Proc. IEEE NUSOD (2007, in press).
S. M. Mitani, P. K. Choudhury, and M. S. Alias, “On the characterization of a new type of oxide-confined 850-nm GaAs-based vertical-cavity surface-emitting laser,” Optik (2007, in press).
S. M. Mitani, M. S. Alias, S. A. Mohammed, et al., “Vertical-cavity surface-emitting laser (VCSEL) in the visible range: modelling, design, and analysis,” Proc. ICSSST, 45 (2006).
A. Mohd Sharizal, Paul O. Leisher, Kent D. Choquette, et al., “Effect of oxide aperture on the performance of 850-nm vertical-cavity surface-emitting lasers,” Optik (2007, in press).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mitani, S.M., Choudhury, P.K. & Alias, M.S. Design and analysis of a GaAs-based 850-nm vertical-cavity surface-emitting laser with different doping in the reflection regions. J Russ Laser Res 28, 610–618 (2007). https://doi.org/10.1007/s10946-007-0046-z
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10946-007-0046-z