Abstract
Currently almost 65 % of the coal in Australia is being produced by opencast mining methods. Mining equipments such as draglines, dredgers or bucket wheel excavators, trucks and shovels, and dozers are the main equipments employed for overburden removal and coal extraction. The choice of equipment for a particular mine depends on geological, geotechnical and economic factors and other site issues. This paper provides a general review of the main equipments used in Australia, including examples of some existing mines and the reasons for their choice of equipment. In addition, the paper discusses major geo-mechanical issues encountered and how these may influence the selection of appropriate equipments used in open cut mining operations.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
M. T. Brett and N. R. Brown, “Economic exploitation of deep coal seams by opencast mining,” in: Proceedings of the 2nd Group Mining Symposium, Johannesburg, Anglo American Corporation (1985).
J. H. Taylor, Opencast Mining, Quarrying and Alluvial Mining, The Institution of Mining and Metallurgy, London (1964).
S. K. Beattie, “Forward preparation in opencast coal mining — an analytical approach,” Quarry Management Production, 9, No. 5 (1982).
Government of Australia, Energy for Minerals Development in the South West Coast Region of WA (2006). [Online] Available: http://www.mpr.wa.gov.au/documents/investment/FinalStudyReportJan.pdf.
Coal Services Pty. Ltd. (2006). [Online] Available: www.coalservices.com.au.
Government of New South Wales, Department of Primary Industries, New South Wales (2006). [Online] Available: http://www.dpi.nsw.gov.au.
Government of South Australia, Primary Industries and Resources, South Australia (2006). [Online] Available: http://www.pir.sa.gov.au.
Government of Western Australia, Department of Industry and Resources, Western Australia (2006). [Online] Available: http://www.doir.wa.gov.au.
Government of Tasmania, Infrastructure and Resource Information Service, Tasmania (2006). [Online] Available: http://www.iris.tas.gov.au.
Government of Victoria, Department of Primary Industries, Victoria (2006). [Online] Available: http://www.dpi.vic.gov.au.
Government of Queensland, Department of Natural Resources and Minerals, Queensland (2006). [Online] Available: http://www.nrm.qld.gov.au.
Department of the Prime Minister and Cabinet (2006). [Online] Available: http://www.dpmc.gov.au.
P. Westcott, Dragline or Truck/Shovel? Some Technical and Business Considerations, University of New South Wales, Mitsubishi Development Pty Ltd (2004).
S. Britton, SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration, Littleton, Colo Publishers (1992).
D. B. Hughes and W. J. P. Leigh, “Stability of excavations and spoil mounds in relation to opencast coal mining,” Quarry Management (1985).
S. R. Newcomb and J. L. Tilley, “Mine planning and geotechnical considerations in the development of the western batters of Yallourn open cut mine,” in: Proceedings of the 2nd Conference for Large Open Pit Mining, Latrobe Valley, Aus IMM, Melbourne (1989).
J. Simmons, “Geotechnical risk management in open pit coal mines,” in: Newsletter, Australian Centre for Geomechanics, (2004).
C. S. Gloe, J. P. James, and R. J. Mckenzie, “Earth movements resulting from brown coal open cut mining — Latrobe Valley, Victoria,” Proceedings of the 11th Symposium on Subsidence in Mines, Wollongong (1973).
M. D. O’Brien and D. G. Swift, “Study of deep open cut mining systems at the Leigh Creek coalfield, South Australia,” in: Proceedings of the International Symposium on Mine Planning and Equipment Selection, Calgary, Rotterdam: A A Balkema (1988).
R. J. Parkin, “Planning, operational and environmental aspects of open cut mining at Boundary Hill Mine, Central Queensland,” Min. Eng., 148, No. 327 (1988).
CSIRO, Automated Volume Measurement of Haul-Truck Loads (2006). [Online] Available: http://www.cat.csiro.au/cmst/automation/projects/truck.php.
Immersive Technologies, Dragline Simulator Launches onto World Stage with Strong Support (2006). [Online] Available: http://www.immersivetechnologies.com/news/news/2005/news_2005_13.htm.
D. J. Davison, “Opencast coal mining: the future and the environment,” Colliery Guard, 233, No. 5 (1975).
C. Burt, L. Caccetta, S. Hill, and P. Welgama, Models for Mining Equipment Selection, Curtin University of Technology, Perth, Australia (2002).
Anon. Benchmarking the Productivity of Australia’s Black Coal Industry, Tasman Asia Pacific Pty Ltd (1998).
M. Pinnock, “Productivity in Australian coal mines,” The Australian Coal Review (1997).
CSIRO, Dragline Simulator Launches onto World Stage with Strong Support (2006). [Online] Available: http://www.cat.csiro.au/cmst/automation/projects/dragline.php.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 3, pp. 73–88, May–June, 2010.
Rights and permissions
About this article
Cite this article
Scott, B., Ranjith, P.G., Choi, S.K. et al. A review on existing opencast coal mining methods within Australia. J Min Sci 46, 280–297 (2010). https://doi.org/10.1007/s10913-010-0036-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10913-010-0036-3